-
how much clarance is under a 2011 can-am spyder rt
can any one tell me i would like to do my own oil change i was going to make a ramp to work on it //// note my cam-am is not at home it is in the shop thay are servicing the clutch slave cy
Last edited by electricman; 03-18-2017 at 07:34 PM.
-
Originally Posted by electricman
can any one tell me i would like to do my own oil change i was going to make a ramp to work on it //// note my cam-am is not at home it is in the shop thay are servicing the clutch slave cy
about 5" I believe.
-
clarance under my can-am
Originally Posted by quasi
about 5" I believe.
Thanks for your info "Is this room to get a drain pan ,and to get at the drain plugs any one know
-
I lift mine up with a motorcycle jack and put 8" wooden blocks under the tires. This is a nice working height to get a drain pan under and not be to cramped taking out the drain plugs.
-
SpyderLovers Sponsor
Room
My jack stands at the lowest setting is 12". Gives me room for the drain pan, and room to remove the drain plugs! Depending on your drain pan, I like 6" above it to work.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
I use 3 plastic ramps and back the Spyder up on them.Works great and lots of room to work.
Bill
-
Also use 3 plastic ramps, I haven't spilled oil on the ground since!
-
Well....
There is enough clearance to do an oil change. I do my oil changes on the ground but you do have to get down low...a full table lift would ge nice but I do have other lifts for other work that can be used if you prefer to raise the spyder for the oil change....
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
I use 8" high car ramps under the front wheels. Plenty of room.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
ramps for oil change
Originally Posted by Ex Winger
I use 3 plastic ramps and back the Spyder up on them.Works great and lots of room to work.
Bill
thanks great for that info
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|