-
USB in rocker switch slot
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
-
Here's a thread posted just the other day should give you some ideas:
http://www.spyderlovers.com/forums/s...ole-(Version-2)
-
Originally Posted by spyryder
Thanks for reposting this!
Originally Posted by Wazoo
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Here is the part: http://www.burnsmoto.com/waterproof-...anel-mount.php You might need to make the cable longer since they only sell it at 4 feet.
Last edited by bullant12; 04-22-2013 at 06:49 AM.
-
Originally Posted by Wazoo
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Wazoo, I was wondering if you were able to find a rectangled weather proofed usb switch for the rocker slot? @Bullant12 idea was brilliant but the previous owner had the CB kit inatalled and the circle in use, so I need to use the free bays on the right.
-
Just bought the dual usb port for my RT from Lamonster's Garage. Just have to install it now.
-
-
Originally Posted by The Governor
I did this....
That's a pretty cool location to have it, but I have a cellphone holder that will not work for me as the cable will go outside and may bend the rubber seal.
-
Originally Posted by Moosemanj
Just bought the dual usb port for my RT from Lamonster's Garage. Just have to install it now.
Did you buy the spyder dock or does he has a usb port that would fit the switch bay?
http://www.lamonstergarage.com/lamon...h-12v-cig-usb/
-
Very Active Member
Originally Posted by Wazoo
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
The one that goes in the rocker switch location are only weather proof when not in use. The USB+12v I have comes with a weather proof in use cover for one cable.
JT
-
Active Member
-
Very Active Member
Originally Posted by jthornton
The one that goes in the rocker switch location are only weather proof when not in use. The USB+12v I have comes with a weather proof in use cover for one cable.
JT
Technically true, but I have used mine in the rain lots of times. Low voltage doesn't conduct in water very well.
Amazon $12.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Jim
2013 ST-S (wife's)
2015 BMW R1200GS (mine)
1981 Yamaha XS400 Scrambler Custom (mine)
-
Very Active Member
Originally Posted by JimVonBaden
Technically true, but I have used mine in the rain lots of times. Low voltage doesn't conduct in water very well..
That's not the concern. Corrosion of those tiny contacts is.
Sent from my SM-T350 using Tapatalk
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
In my opinion this is the best way.
It matches the switches in the center, has a rubber plug when not in use, etc....
This post shows it on the right but with some plastic trimming you can put it in the middle perfectly and it looks factory!
http://www.spyderlovers.com/forums/s...Switch-Cluster
Bob
Last edited by finless; 01-16-2017 at 03:31 PM.
-
Very Active Member
Originally Posted by IdahoMtnSpyder
That's not the concern. Corrosion of those tiny contacts is.
Sent from my SM-T350 using Tapatalk
Possibly, but a little dielectric grease fixes that.
Jim
2013 ST-S (wife's)
2015 BMW R1200GS (mine)
1981 Yamaha XS400 Scrambler Custom (mine)
-
Empty Rocker Switch Slot
Originally Posted by Wazoo
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Check out JT's Spyder Store for a product called, Carchet Car 3.1. It's a dual USB power outlet that fits in the center empty rocker switch slot. Looks like original equipment manufacture when installed. Has blue illumination, making it visible at night.
-
Very Active Member
Originally Posted by WilderThomas
Check out JT's Spyder Store for a product called, Carchet Car 3.1. It's a dual USB power outlet that fits in the center empty rocker switch slot. Looks like original equipment manufacture when installed. Has blue illumination, making it visible at night.
Same as I posted above from Amazon for $6 cheaper.
Jim
2013 ST-S (wife's)
2015 BMW R1200GS (mine)
1981 Yamaha XS400 Scrambler Custom (mine)
-
Blazing Member
IMG_0231.JPGHow about a dual USB charger with a battery gauge ?IMG_0232.JPG
-
Originally Posted by fastfraser
That's cool! Where did you get that please?
Bob
-
Very Active Member
This is what you want
This is the exact part you need for what you describe. It is made by the same manufacturer as the switches and will fit those slots without any cutting. Enjoy!
http://www.panbo.com/assets_c/2014/1...nbo-10197.html
-
Last edited by DJFaninTN; 01-22-2017 at 06:23 PM.
-
USB Rocker Switch
Originally Posted by Wazoo
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
There's a company called JT's Spyder Store. They have a dual USB "switch" called the Carchet Car 3.1. It fit's neatly in one of those unused rocker switch slots. It looks like an original equipment manufacture, has a weather proof cap, and has blue illumination that is visible in low light. Check them out one day. I've enclosed a link here, but don't know if it can be accessed.
-
USB rocker switch slot
Originally Posted by GeekyRider
Wazoo, I was wondering if you were able to find a rectangled weather proofed usb switch for the rocker slot? @Bullant12 idea was brilliant but the previous owner had the CB kit inatalled and the circle in use, so I need to use the free bays on the right.
Try going to JT's Spyder Store.
-
Very Active Member
Jim
2013 ST-S (wife's)
2015 BMW R1200GS (mine)
1981 Yamaha XS400 Scrambler Custom (mine)
-
I have been looking at the dual USB with the Volt meter setting on my desk thinking of putting it in the empty slot but was worrying about it getting wet, After two weeks I went with the in side of the glove box route< I wanted it to be able to charge when i was parked but didn't want it on all the time so I found a Dorman mini rocker (Waterproof) installed it in the empty spot wired to the USB in the glove box alone side of a standard power outlet,
Now I can turn it on and charge what ever and still be able to see the voltage.
install.jpginstall2.jpginstall3.jpg
Seeing I have never had the tupperware off and thanks to BMW and my old K1200LT I had a good idea but still getting to the Glove box is a real Pain
-
USB rocker switch slot
Originally Posted by Wazoo
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Don't know if you've managed to find a solution to your question yet, but you might try JT's Spyder Store. There's a device he sells which fits into that empty rocker switch slot, is weatherproof, looks OEM, is illuminated at night, has the jacks for two USB plugs. It's called a Carchet Car. And I have one installed on my 2012 Can Am Spyder RT-S. Just a thought.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|