Mighty and numerous Spyder sages, I have a problem. Specifically, my Spyder is piddling on my garage floor when I'm not looking, and has on my driveway also.
From what I see in the garage, I have 2 puddles side by side located roughly just in back of the "wings" of my front wheel arms.
I have asked her if she wants a litter box, but she refuses to answer me.
The liquid looks like a very light pink water, and is slightly slippery when rubbed between my fingers.
Can you tell me what the fluid is, and can I add more so that I can safely ride it 100 miles to the dealer for whatever fix is needed before the snow falls?
Thanks,
Pete
Worth checking all fluids. If has a bitter smell may be brake fluids not something you want to try 100mile dealer trip on. Laydown some news paper large enough to cover from foot pegs or floor boards to the front, & as wide as both tires, take pics if you can get good view before you move bike. Dealer will have to pull tupperware off to look for wetspots & splatter. Be prepared will not be quick. Hope is simple for you.
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
IMHO.......just re-move the Tupperware on the right side. It may just be a clamp, or the tank may have a crack...this is a known issue.............Mike .................. PS, It's always a good idea to tell us what Spyder you have and the year..........sometimes it makes a BIG difference .........Nice color combo!!!!
Last edited by BLUEKNIGHT911; 11-03-2015 at 08:09 PM.
Thanks! Any suggestions as to where I go from here?
The temps have been in the 50's here; do you think that the wind chill driving at freeway speeds would provide enough cooling to safely get to the dealer?
Or maybe I should just contact the dealer for their opinion...........
IMHO.......just re-move the Tupperware on the right side. It may just be a clamp, or the tank may have a crack...this is a known issue.............Mike
Can't tell whether you have an RS or an ST and your profile doesn't specify which.
If you can, pull off the right side Tupperware just above the radiator cutout. If you look in you'll see a hose coming from the bottom of the coolant tank going into the top of the water pump; this hose has a worm clamp instead of a crimp clamp. On my ST and several others here, that clamp was loose. A couple of turns of a screwdriver was enough to stop the leak.
Trb-- (Roger)
2014 Cognac STL:Ultimate Seat, Nelson Rigg Tail Pack, Nelson Rigg RS/ST Half Cover, TL fender lights, Squared Away Laser Alignment, BajaRon sway bar and links, Akropovic Sport Silencer
2022 White Pearl F3T
Gone but not forgotten: 2019 F3S Special Series Liquid Titanium
IMHO.......just re-move the Tupperware on the right side. It may just be a clamp, or the tank may have a crack...this is a known issue.............Mike .................. PS, It's always a good idea to tell us what Spyder you have and the year..........sometimes it makes a BIG difference .........Nice color combo!!!!
Of course, I intended to but was sort of focused, Lol. 2015 ST S Thanks on the color.
Can't tell whether you have an RS or an ST and your profile doesn't specify which.
If you can, pull off the right side Tupperware just above the radiator cutout. If you look in you'll see a hose coming from the bottom of the coolant tank going into the top of the water pump; this hose has a worm clamp instead of a crimp clamp. On my ST and several others here, that clamp was loose. A couple of turns of a screwdriver was enough to stop the leak.
Yep, sounds like anty freeze. For confirmation find a stray cat and have them taste test it for you. (just kidding)
New spyders seem to do this, mine leaked a little from the top radiator hose
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
If the anti-freeze is low and you have to ADD some .......BRP uses a type ( they claim ) shouldn't be mixed with other types ( I believe them )......Be careful when putting the cap back on it's very easy to NOT GET IT TIGHT and this will cause it to over-flow making the problem worse.........good luck......Mike
If the anti-freeze is low and you have to ADD some .......BRP uses a type ( they claim ) shouldn't be mixed with other types ( I believe them )......Be careful when putting the cap back on it's very easy to NOT GET IT TIGHT and this will cause it to over-flow making the problem worse.........good luck......Mike
I hadn't gotten around to (maybe) thinking of that, so Thanks! Lol, I'll probably have to have the dealer mail some to me, tho I'm just guessing.
I just got my first look at the the cap, so I still have a panel to remove to get to the heart of the matter.