-
New Topic Laser Locations
Anyone have access to bulletin number 2015-6 about the laser alignments??? I like to see what the bulletin has to say.
So much for my original post..Wish we stay on topic sometimes..
Last edited by trikermutha; 07-08-2015 at 10:44 AM.
-
Active Member
From www.spydercomfort.com . This is the ROLO Alignment system
"On 3/25/2015 BRP issues a additional service bulletin to their dealers named Roadster alignment specifications, number 2015-6, endorsing True Laser track for the 2nd year in a row"
-
Originally Posted by Doc - Riverside
From www.spydercomfort.com . This is the ROLO Alignment system
"On 3/25/2015 BRP issues a additional service bulletin to their dealers named Roadster alignment specifications, number 2015-6, endorsing True Laser track for the 2nd year in a row"
The problem is, the company hasn't yet completely penetrated the dealer market, which makes it hard for many of us to get laser alignment without traveling hundreds of miles. In my case, the nearest dealer is in Las Vegas which is about 350 miles from me. I talked to Spyder Comfort and they said that Ride Now has ordered them for their stores here in the Phoenix area. Hopefully, they will be up and running sometime in mid July. I don't have any reason to believe my brand new Spyder is out of alignment, but based on what I've read here, it would be worth $125 for the peace of mind.
Pam
-
SpyderLovers Sponsor
Come on up!
Pam,
worth the trip to come to Las Vegas ! Don't pay to be some ones training bike! We can Square you away! Call Ann to set it up - you will be happier if it is done right! Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Originally Posted by cptjam
Pam,
worth the trip to come to Las Vegas ! Don't pay to be some ones training bike! We can Square you away! Call Ann to set it up - you will be happier if it is done right! Joe
I sure agree with Joe. Hopefully RideNow does invest in this but it's going to take them awhile with the "learning curve" involved. Joe and Ann have done hundreds of these and you won't be disappointed! They "squared me away" and the ryde is awesome! Plus you can spend a night in Sin City and enjoy a buffet somewhere...
-
Lazer
Originally Posted by Pampurrs
The problem is, the company hasn't yet completely penetrated the dealer market, which makes it hard for many of us to get laser alignment without traveling hundreds of miles. In my case, the nearest dealer is in Las Vegas which is about 350 miles from me. I talked to Spyder Comfort and they said that Ride Now has ordered them for their stores here in the Phoenix area. Hopefully, they will be up and running sometime in mid July. I don't have any reason to believe my brand new Spyder is out of alignment, but based on what I've read here, it would be worth $125 for the peace of mind.
Pam
Try Peoria AZ . I am in Gilbert and have read they do it. If I remember right ask for Andrew
Ride now in Chandler just told me yesterday they would not install my Kumho car tire.
good luck Kenn
-
Come to Idaho!
I would love to get one done, but it looks like Washington is our closest option!
-
Question is - If BRP feels that way why are they not doing it at the factory or requiring it as part of setup by the dealers??????????
-
Originally Posted by idahospyder1
I would love to get one done, but it looks like Washington is our closest option!
Yes please come back to Idaho!!! Had it done two years ago when they were up from Las Vegas and now want to get done on my new F3.
I am sure Birds of Prey motor sports would welcome you, and also sure there is enough work here to keep you busy.
-
This sure went off the original post..
-
Originally Posted by kbwitt
Try Peoria AZ . I am in Gilbert and have read they do it. If I remember right ask for Andrew
Ride now in Chandler just told me yesterday they would not install my Kumho car tire.
good luck Kenn
Chandler location of Ride Now is getting one installed. I'd rather go there than 65 miles to the Peoria location. I'm among the legions of people who have had bad experiences with Ride Now, but if they're the only game in town, I guess I have to bite the bullet. Thanks
Pam
-
-
Originally Posted by grumpybob
Question is - If BRP feels that way why are they not doing it at the factory or requiring it as part of setup by the dealers??????????
Good question
Pam
-
Originally Posted by cptjam
Pam,
worth the trip to come to Las Vegas ! Don't pay to be some ones training bike! We can Square you away! Call Ann to set it up - you will be happier if it is done right! Joe
I would love to, but an overnight trip to Vegas is not in my budget right now. My finances are still reeling from having just purchased the Spyder, plus my son is getting married in three weeks, and I have to make a 2,000 mile four day trip to Dallas to attend the wedding. Hotel rooms are not cheap.
I'll see how things look in a month or so.
Pam
-
Very Active Member
Originally Posted by cptjam
Pam,
worth the trip to come to Las Vegas ! Don't pay to be some ones training bike! We can Square you away! Call Ann to set it up - you will be happier if it is done right! Joe
It's only 300 miles or so to Vegas and a beautiful ride. I'd push it there before I'd let Ride Now do it. The store in Tucson supposedly aligned my used 08 GS I bought from them, it was so far off it's a wonder I didn't crash,they didn't even tighten the jam nuts.
-
Very Active Member
Originally Posted by grumpybob
Question is - If BRP feels that way why are they not doing it at the factory or requiring it as part of setup by the dealers??????????
That would constitute a flat out admission by BRP engineers that there is better way to do it that they did not develop. Engineers do that very reluctantly. Plus they would probably have to pay licensing fees if they require the use of that method. There's a huge difference between acceptable and required.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Originally Posted by trikermutha
Anyone have access to bulletin number 2015-6 about the laser alignments??? I like to see what the bulletin has to say.
Your best bet is to go to your dealer and have them pull it up. It most likely is a repeat of the one last year that simply stated the Outlaw laser alignment is an acceptable alignment method.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Originally Posted by trikermutha
Anyone have access to bulletin number 2015-6 about the laser alignments??? I like to see what the bulletin has to say.
So much for my original post..Wish we stay on topic sometimes..
Good luck getting an answer to your actual question on this forum.
2013 RTS SE5
2013 Kawasaki Vulcan Nomad 1700
-
Very Active Member
Originally Posted by trikermutha
Anyone have access to bulletin number 2015-6 about the laser alignments??? I like to see what the bulletin has to say.
So much for my original post..Wish we stay on topic sometimes..
Since no one who has read the question has been able to answer yes, what would you like to have, a series of 500 noes? Or no responses whatever that would then appear to mean no one read it?
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
-
-
Originally Posted by WasWinger
Since no one who has read the question has been able to answer yes, what would you like to have, a series of 500 noes? Or no responses whatever that would then appear to mean no one read it?
Well a straight answer would be fine. But if you don't have the answer that's fine, But when you chime in with other off topic comments it makes the original post non existent IMO.
-
potential reason?
Originally Posted by grumpybob
Question is - If BRP feels that way why are they not doing it at the factory or requiring it as part of setup by the dealers??????????
Because they don't put the tires on until the spyder gets uncrated by the dealer.
-
Very Active Member
Originally Posted by sduskin
Because they don't put the tires on until the spyder gets uncrated by the dealer.
The alignment is based on the rotor, not the tires. The tires don't have to be on to be aligned. In fact, the BRP procedure requires the tires to be removed. They could do a laser alignment at the factory but they'd have to revise the procedure and/or tools as the tires would not be mounted on the bike and the current procedure is designed to be done with all the tires mounted.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Trikermutha, as an idea, and if it works maybe you would share it with me or the entire forum, possibly you could get a hold of Mike at Spydercomfort / ROLO in Florida. He may have a copy he is willing to share.
There may possibly be 2 bulletins. 2014-6 and 2015-6
http://www.spydercomfort.com/
PK
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|