-
-
SpyderLovers Founder
Just installed the LED tail lights and the all in one unit. Install was pretty easy even though I do have a ton of wires back there. It pretty much is plug and play just like the triple play unit I replaced with this box.
The LED's are very bright and it is nice to have it be a turn signal too. If you have the Givi bags with that ugly bracket they made for the fender you could leave those off and just use the tail light as your turn signals.
[nomedia="http://www.youtube.com/watch?v=YM7Y0BwrsJw"]YouTube- Broadcast Yourself.[/nomedia]
-
-
Question
Can the All In One be used if you're just using yours stock tail light setup ?
-
Originally Posted by SSR
Can the All In One be used if you're just using yours stock tail light setup ?
Have not tried it on stock lights.
But with these lights now being everthing the durability of LEDs is almost a must. Because a cheap stock bulb burning out would cause you to loose your turn signal on that side too.
MM
-
-
When my right rear tail light bulb burned out, I did not get a limp mode or a turn signal failure. Someone following me told me that one light was out. I repleced with a standard 1157 and all has been well, even though replacing it with the BRP sport rack is a real PITA. Has every one else who had a bulb fail seen limp mode?
-
Originally Posted by BRPjunkie
When my right rear tail light bulb burned out, I did not get a limp mode or a turn signal failure. Someone following me told me that one light was out. I repleced with a standard 1157 and all has been well, even though replacing it with the BRP sport rack is a real PITA. Has every one else who had a bulb fail seen limp mode?
Not with only one burned out, you'll still be OK.
But have both go out and watch your dash light up like a Christmas tree, and get ready to go into Limp Mode.
MM
-
lamont,
Thanks for the video!!!!
Looks like a christmas tree!!!!
Any way you could do the same shot, but get one of the coons to apply the brakes while you have the turn signal on so we can see what it does?
-
Originally Posted by Magic Man
Not with only one burned out, you'll still be OK.
But have both go out and watch your dash light up like a Christmas tree, and get ready to go into Limp Mode.
MM
Thanks Magic Man for the clarification. Dealers can't answer even these simple questions, but this forum (and MM on electrical) are quick. On my week long ride to the Natchez Trace, I'm going to need a couple of phone numbers (not for BRP dealers), but for forum users. That way if I have a problem, I can call in and through this forum probably get an answer back before BEST can find the nearest dealer.
-
-
Originally Posted by Magic Man
Not with only one burned out, you'll still be OK.
But have both go out and watch your dash light up like a Christmas tree, and get ready to go into Limp Mode.
MM
Here is an economical tester for ya!!(SEE, I CAN post on topic!!)
-
Originally Posted by draboo
Here is an economical tester for ya!!(SEE, I CAN post on topic!!)
Hope this not like the cat from Christmas Vacation or something will smell like BBQ.
-
Hey Lamonster.... do I see different rear view mirrow on your spyder??
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|