Finally got around to wiring and mounting of Gadgets, Radar Detector, Tender & iPhone

[Osros]

I been wanting to get this done since I got the ST-S and could not find a proper solution for Detector mounting until now. I will share what I have done all simple just had to find the right mount for the STS.

Im focusing on the Detector mount, took the longest to figure out what I wanted. I went with a handle bar mount method because I was looking for a easy quick way to get it on without making holes yet on the bike, at some point I may change it when the new wears off and I don't care about a couple of holes.

Here are the parts used and Pics with one added change, All parts ordered from amazon for ease.

318Im7z3yqL__SY100_.jpg31HmgiVhokL__SY100_.jpg31mBPi8IbgL__SY100_.jpg

Ram Mounting Systems Short Double Socket Arm W/2.5" Round Base Ram-b-103u-a

RAM Radar Detector Mounting Plate

RAM Mount V-Base Rail Yoke Clamp Mount ( NOTE: Hose clamps supplied will not fit on STS get a size 44 from Home Depot or Lowes which will fit around STS bar, add a bit more black tape to protect bike from scratches)

Basically that's it below is how it looks installed:

IMG_0135.jpgIMG_0142.jpg

For some reason wont let me upload other photo, anyway this should give you idea what was done.

What I'm using is a Escort PassportIX Detector also using Escort Live with iPhone with direct wire smart cord. I also wired iPhone Charging cable to reach phone at handlebar and Battery tender wired direct to battery under the frunk.