Siny10309 asked the question about blind spot mirrors awhile back. That got me thinking why not, anything to help you keep safe.
So I got this unit from Amazon:
I don't do videos like Finless, but here are pixs. I decided to put the sensors on the black part in the back, I only used 3 of the sensors. Now I'm thinking maybe put the other one in the front of the bike, for parking . I put the brain in the trunk, with the extra wire in the right speaker area. I ran the display wire along the frame to the cluster area, used a drill for the hole and then a dremel to elongate the hole as the little plugs are rectangle. I also ran the power from the power plugs in the front because the previous owner put in a 30amp fused power plug in the dash and I have used that for all of my power runs. A little 5/8" plug drill to cut the holes, but the sensors are designed for a thin location, so I used the drembel to make the hole area a little thinner and a glue gun to keep the sensors in place.
A car on the right 1.6 meters away
A car on the left less than a meter away.
Sensors mounted
Nothing along side or behind close enough to be a problem.
Parking, blind spot sensors
Reply With Quote
