New Mods for my wife's 2013 ST-S.

[JimVonBaden]

I ordered a set of universal fit panniers from E-bay, yes, yes I did.

I am actually pretty impressed. They are light weight, but do not feel flimsy. They have solid universal mount components, lock, easy one/off, and have dual lighting. I could do running and signals, brakes and signals, or running and brake lights, I chose the ladder. This bike will be used in traffic a lot, often at night.

First Panniers.

I didn't have a lot of time, so I do not have install photos. That's OK because my plan is to test them, then take it all apart and weld the mounts together, clean them up and powder coat them for a more OEM look. I'll document that process.

So, here is what you get for $299 delivered:










For the wiring I used quick lock connectors. I need to work on them to hide the wiring better, but it should be good when I rebuild the mounts. I'll add some tubes to hide the wires, or something.

I have other mods planned, so I will add them to this thread in the future.

[Haze]

Nice job on the installation.
Looks like a great winter project with welding and powder coating.
Where did you tap into the wiring for the tail lights?
Cheers, David C.

[JimVonBaden]

Nice job on the installation.
Looks like a great winter project with welding and powder coating.
Where did you tap into the wiring for the tail lights?
Cheers, David C.

Thanks. It should come out very nice. I will, of course, replace the crossover bar for a more integrated look.

I just tapped the brake and running light wires under the dirt guard right where they split for the two bulbs in the tail light. I used posi-taps. Clean and easy and no damage to the wiring.

[bwbarnes]

Very nice Jim. Please post more pictures of the setup, including pics of the mounts without the bags attached.

[JimVonBaden]

Very nice Jim. Please post more pictures of the setup, including pics of the mounts without the bags attached.

Thanks, will do.

The mounts are a bit cludgy, but they are pretty solid and look OK with the bags on. Once I cut and weld everything, then powder coat them, they should look much better!

[Zip]

Looks good

[JimVonBaden]

Very nice Jim. Please post more pictures of the setup, including pics of the mounts without the bags attached.

OK, here are a few more!










Here is the inside:




The outer trim panel can be removed easily for paint of wrapping. Just five short screws.








Overall I am pretty impressed for the price!

[JimVonBaden]

Also, because I have a set of heated grips to install, as well as aux lights and a USB power plug, I pulled the panel and added the switches. The Heated grips plug is there and went right in. I pulled the hot and ground from the second from the left socket for the USB, and the Aux switch seemed about right so I plugged it in. I wont know on that until the lights come in.







More to come when the rest of the parts come in and I have time.

[MurrayBrown]

[QUOTE=JimVonBaden;1197449]I ordered a set of universal fit panniers from E-bay, yes, yes I did.













I REALLY like the lights on the "bags"! I need to figure out something for my Givi bags on my 2014 ST Limited.

[JimVonBaden]

Thanks! Many of the GIVI panniers have reflectors that will accept lights behind the lenses.

Check here for potential kits. https://www.admorelighting.com/

[JimVonBaden]

Added a modified GPS mount:


And a State Inspection Sticker plate:

[ARtraveler]

Good looking stuff my friend. You saved $500 or so over the GIVI ones made for the . Look as strong or stronger.

If you want cheesy, the luggage inserts for the RT's are pretty bad. They do the job, but for the price I paid--I felt a bit clipped.

[JimVonBaden]

Replaced the grips today, The heated grips work great, and take about 2 hours to install for someone who has never done it before.










By the way, you can not rotate the switch pods, they are locked in place by substantial tabs on the bar mounts.