Spare key finally

[Warlock]

Still waiting on my 2 keys I ordered at a really good price. In the meantime I ordered a single key from e bay. Carried it to the local hardware and had them cut it for me. Phase one done. Found a Ace Hardware about a hour away said they would see if they could do it. Jumped on the Spyder and made it to the store. Walked in and about 2 minutes later key done and working with no charge. Going to let them do the other 2 when they arrive. Said they would cut them and clone for a $1.00 per key. Great place and friendly people there.
David

[Bob Denman]

Glad to hear that you've found a solution!


HomerClones.jpg

[2RTsGV]

I am assuming you are saying that you can get a key with a blank chip in it from ebay and take it to a hardware store and have it programed for the spyder, that you insert to the keyhole and it will start the bike for $1.00 ... if this is the case, then why does it cost so much from BRP?

[Bob Denman]

Since your bikes are pre-2014: you are correct.n
Buy a keyblank that has the proper chip in it, get it cut to fit your ignition switch, and then take it to a locksmith who can clone the programming from your existing key.

[Warlock]

I am assuming you are saying that you can get a key with a blank chip in it from ebay and take it to a hardware store and have it programed for the spyder, that you insert to the keyhole and it will start the bike for $1.00 ... if this is the case, then why does it cost so much from BRP?

Like Bob stated. Mine is a 08 model. The dealer wanted $75.00 plus $70.00 to program plus tax. I would also have to carry it to a place to cut it for me. The dealer doesn't cut the key. Total price in this key is $22.00. My local hardware store cut mine for free and the Ace Hardware cloned it for free.
David

[jerpinoy]

Where did you get your blank keys?

[Justacruisin]

At the dealer-ship......$250.00.

[finless]

Still waiting on my 2 keys I ordered at a really good price. In the meantime I ordered a single key from e bay. Carried it to the local hardware and had them cut it for me. Phase one done. Found a Ace Hardware about a hour away said they would see if they could do it. Jumped on the Spyder and made it to the store. Walked in and about 2 minutes later key done and working with no charge. Going to let them do the other 2 when they arrive. Said they would cut them and clone for a $1.00 per key. Great place and friendly people there.
David

See my video did not lie when you find the right people to deal with

Bob

[Warlock]

Where did you get your blank keys?

I got some on order, but if you need one now look here
http://www.ebay.com/itm/2008-2013-Ca...JRy467&vxp=mtr
if you are not in a bind order them here
http://www.lockpicks.com/aprilia-sco...23rt5-jma.html
David

[Motorcycledave]

Conley Lock & Key in Stockton CA has the key blanks in stock and can
program them on the spot I think I paid $45.00 for everything

See my video did not lie when you find the right people to dal with

Bob

[finless]

Conley Lock & Key in Stockton CA has the key blanks in stock and can
program them on the spot I think I paid $45.00 for everything

No offense Dave but $45 is nuts! I got 3 made (Cut and programmed) for free at Ace Hardware per my video!
Most Ace Hardware stores will cut and program for free unless you buy the blanks from them which they do not have for the Spyder 2008-2013.

Bob

[Warlock]

The Ace that cloned mine is going to charge me a dollar a key to cut and clone them. Gladly will pay that.
David

[Motorcycledave]

Yea I do know better now I got mine 3 years ago

No offense Dave but $45 is nuts! I got 3 made (Cut and programmed) for free at Ace Hardware per my video!
Most Ace Hardware stores will cut and program for free unless you buy the blanks from them which they do not have for the Spyder 2008-2013.

Bob

[olsarge]

New Ryder - - us the key for the 2015 and newer different?

Sent from my SAMSUNG-SM-J320A using Tapatalk

[Bob Denman]

Yes, it is...
The 2014 and later keys use a rolling code... a lot like all of the new garage door openers.
You can't clone them.

[olsarge]

Yes, it is...
The 2014 and later keys use a rolling code... a lot like all of the new garage door openers.
You can't clone them.

Thanks for the info

Sent from my GT-P3113 using Tapatalk

[jaherbst]

Key blanks for the 2014 and later are different and not interchangeable . Must be purchased and programmed at your dealer. It can be cut anywhere but must be programmed at your dealer. Total cost for purchase, cutting and programing at my dealer was $50.00.

When buying or ordering be specific about year of Spyder.

Jack

[Bob Denman]

I tried figuring out a way to get the proper crypto-chip and key-blank, but never did...
As near as I could figure: the pre-2014 bikes used a TP-5 chip, and the newer bikes used a TP-12...
I bought a TP-12 chip, and gave it a try... BUDS wouldn't recognize it.

[billybovine]

I tired figuring out a way to get the proper crypto-chip and key-blank, but never did...
As near as I could figure: the pre-2014 bikes used a TP-5 chip, and the newer bikes used a TP-12...
I bought a TP-12 chip, and gave it a try... BUDS wouldn't recognize it.

Of course BUDS would not recognize it. The uncloned chip has no codes to transmit. There is nothing that a dealer using BUDS can do with it. That's like putting a blank CD in a music player and being surprised that no music comes out. As I tried to explain at the time. You needed to take your cloneable key and the whole Spyder to a locksmith with the correct equipment to clone that kind of chip.

[jcthorne]

Any service dealer with Buds can program the keys. Not just dealers. I have done several for our customers.