-
Active Member
Help who has had this problem
Hard steering check eng lite on dynamic power steering indicator on who has this problem 2014 RT
Sent from my iPhone using Tapatalk
-
Very Active Member
Check your battery connections, the DPS consumes the bulk of the electrical power used by the Spyder.
The Power of Logic.
Start Thinking.
-
Very Active Member
Press Mode, Set and Turn Cancel buttons. All at the same time. Tell us what codes come up.
2018 F3 LIMITED
-
Active Member
Thank you I will try that
Sent from my SM-T350 using Tapatalk
-
Active Member
OK can anyone explain this code P0562
Sent from my SM-T350 using Tapatalk
-
Very Active Member
Spyder Diagnostic Codes - P0562
System voltage Low
Alternator defective
or not connected
Battery failure; an
external battery charger
may have been used.
Damaged circuit wires or
connection.
Measure battery voltage with
engine stopped (expected
value: 11 to 13 volts).
Measure battery voltage with
engine running (expected
value: 13 to 14.7 volts).
Check connections
on voltage regulator.
Check ground and positive
connections on battery.
Check ground on vehicle frame.
-
Very Active Member
You may want to download the free app spyderCodes, available at the Play Store or App Store.
The Power of Logic.
Start Thinking.
-
Active Member
Thank you
Sent from my SM-T350 using Tapatalk
-
P0562
Originally Posted by Roadster Renovations
Spyder Diagnostic Codes - P0562
System voltage Low
Alternator defective
or not connected
Battery failure; an
external battery charger
may have been used.
Damaged circuit wires or
connection.
Measure battery voltage with
engine stopped (expected
value: 11 to 13 volts).
Measure battery voltage with
engine running (expected
value: 13 to 14.7 volts).
Check connections
on voltage regulator.
Check ground and positive
connections on battery.
Check ground on vehicle frame.
Can anyone clarify, why connecting and external battery charger could cause this code?
(Battery failure; an
external battery charger
may have been used.
Two days ago I hooked up my battery tender. This morning, I disconnected it ( it has the quick plug and go type connector) and started the bike. The check engine light came on and I got the handle bar warning light. Checked and got the P0562 code. I checked voltage not running and it is 12.86. Running it is 14.26. Perfect I would say. I shut it off, restart and all is fine for about a minute, then it comes on again. Tried disconnecting battery for a bit, that didn't help. Any ideas? Thanks guys. Enjoy reading this forum. The operators manual covers charging, replacing and boosting, but no mention it will start throwing codes.
Last edited by BanditK6; 09-18-2018 at 10:34 PM.
Reason: adding info
-
Originally Posted by spyderCodes
You may want to download the free app spyderCodes, available at the Play Store or App Store.
Sounds useful, but the app shows as $15.99 in the Apple App Store. Is this correct?
-
Originally Posted by rocketman74
Sounds useful, but the app shows as $15.99 in the Apple App Store. Is this correct?
This shows free to me
Screenshot_20180921-151257_Google Play Store.jpg
Sorry, just noticed the part about apple
-
Originally Posted by Shadowkast
spydercodes.jpg
Interesting. Here is what it looks like in the iOS/Apple App Store...
-
Ozzie Ozzie Ozzie
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|