-
Needed a heel rest on the brake side.
Having limited use of my right ankle I needed a place to put my heel above the brake pedal. This is mounted to the foot peg between the metal part and the rubber. I had to use two 1/4" longer screws to sandwich the rest between the rubber part and metal of the peg. Cut out of a piece of aluminum. Be careful and get soft so it won't crack when beating it in a vice to get the angle correct. Black powder coat and some grip tape and it works very well.
floor2.jpgfloor1.jpgfloor3.jpg
Last edited by Habib; 07-27-2016 at 06:15 PM.
-
Very Active Member
I like that! I'm thinking about doing something like that with mine.
Toby
2020 RTL
-
Very Active Member
Nice thinking outside the box. I also do not like pegs, so I went with a floorboard setup on my 2014 RT SM6. I even have a set of mini floor boards mounted on my Suzuki boulevard m109r.
2021 RTL , brake pedal from "Web Boards" chalk white
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|