-
What U-Fit did you choose..
I got the 2016 F3-T with position 5 and Floor Boards. I was happy with position of the Handle Bars, so I went with stock. I am 6'1" with 34" inseam. I like the furthest position because I can hang my heels off the back of floor board, but still go full forward if I want.
Chris
-
I'm on an RT... but I spent over an hour playing with the test-fit jugs that were on an F-3 at my dealership.
After trying every likely combination: I settled-in at the middle positions for both the pegs and the bars.
The Missus needed everything brought to the shortest possible setup for her.
BTW: I'm 5'10" with a 31" inseam, and she's 5'1" with a 25" set of legs...
-
Active Member
Originally Posted by No 2817
I got the 2016 F3-T with position 5 and Floor Boards. I was happy with position of the Handle Bars, so I went with stock. I am 6'1" with 34" inseam. I like the furthest position because I can hang my heels off the back of floor board, but still go full forward if I want.
Chris
Position 6. 6'4" with 36" inseam. I drilled another hole in the lower frames and lengthened the brake rod. I installed the attitude bars, which are perfect for me since I was leaning too far back with the stock bars.
Last edited by HIspyder; 06-29-2016 at 09:14 PM.
Just another crappy day in Paradise....Aloha!
-
I've got the short-reach bars, but they're not quite close enough, at that. My footboards are in position 3, but I'm considering going to 2. I'll decide after this ryding season is over. I'm 5'3" and 29" inseam.
-
Very Active Member
I have position 4 on my floorboards and the middle position on the handlebars.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Stock position on the bars and #4 on the foot boards I an 5' 11" and I feel like I would also be just as comfortable at the #5 position.
-
Active Member
I have mine in the #4 Position and am 5' 10" Bars are in the middle and stock.
Work Perfect for me but have not been on a long ride yet.
2016 Spyder F3 Limited Special Series
-
Very Active Member
Stock position here 6'0... 36" inseam... Regular handle bars 2
Live, Love, and Ride! God Bless!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|