-
Spyder RT cover
I am thinking about buying a Show Chrome rear luggage rack for my 2014 Spyder RT limited. I know my BRP half cover will not fit over the rack. Will the BRP full cover fit over the rack? I use the half cover frequently so does anyone know an aftermarket one that fits over the rack? I don't use the full cover much but it seems the BRP might work as there is some slack around the trunk door. Thanks!
-
Sorry...
There's not a bit of slack, and the BRP full cover will also no longer fit.
-
Very Active Member
I have a Show Chrome rack and this is the cover that I use. It fits perfectly over the rack. Good price, too.
http://www.bigbikeparts.com/template...GroupGuid=2016
"A Wise Man Once Said, I Should Ask My Wife."
2017 Champagne Metallic RT-S SE-6 Rivco Dual Flag Holders; Slingmods Highway Pegs; (Hate Them) Airhawk Seat Cushion; Show Chrome Black Touring Rack w/ Risers & Touring Windshield; RAM X Mount For TXTAG; TackForm Phone Mount; Lidlox; Magic Mirror Mounts; Guardian Bells; WOLO "Bad Boy" Air Horn; Dual USB Power Outlet With Voltmeter; 12V outlet for misc. stuff; Spyderpops Full View Mirror Turn Signals; Large Brake Pedal; Kott Grilles; Large Mud Flap; BajaRon 3 Piece Sway Bar, Last But Not Least, Kuhmo Rear Rire, Vedrestien Fronts.
2017 RT-S , Brake pedal extender is twice the size of the stock pedal. Champagne Metallic
-
Very Active Member
I have a trunk rack from diamondraccessories.com and the half cover fits over it.
-
John,
As I recall: there's a little bit more slack in the fit of the half-cover; right?
-
Very Active Member
Originally Posted by Bob Denman
John,
As I recall: there's a little bit more slack in the fit of the half-cover; right?
Bob, after I put the rack on, my half cover would no longer fit, as it did not have enough stretch to get over the rack. I had heard that the BRP full cover also would not fit, so I ended up getting the full cover from Big Bike Parts, which is bigger than the BRP cover. And, at $94.90 with shipping, a better deal than the BRP cover.
"A Wise Man Once Said, I Should Ask My Wife."
2017 Champagne Metallic RT-S SE-6 Rivco Dual Flag Holders; Slingmods Highway Pegs; (Hate Them) Airhawk Seat Cushion; Show Chrome Black Touring Rack w/ Risers & Touring Windshield; RAM X Mount For TXTAG; TackForm Phone Mount; Lidlox; Magic Mirror Mounts; Guardian Bells; WOLO "Bad Boy" Air Horn; Dual USB Power Outlet With Voltmeter; 12V outlet for misc. stuff; Spyderpops Full View Mirror Turn Signals; Large Brake Pedal; Kott Grilles; Large Mud Flap; BajaRon 3 Piece Sway Bar, Last But Not Least, Kuhmo Rear Rire, Vedrestien Fronts.
2017 RT-S , Brake pedal extender is twice the size of the stock pedal. Champagne Metallic
-
I have both covers
One large Tourmaster is the full cover and a BRP half cover. Neither one fit after I installed my trunk rack. I took both covers to a skilled custom upholstery shop and had expanded panels installed in each cover to accommodate the trunk rack. I supplied the material and the cost to modify the two covers was $50.
-
Very Active Member
Originally Posted by oldguyinCT
However, just for info, the pocket on that cover is too small to fit over an F4 tall and wide windshield. I had one. Switched to a Guardian cover which fits over the windshield quite nicely. I think it would probably go over a trunk rack also.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
I have the rack on our RT as well, and I use a full cover, UltraGuard. Works great! AND cheaper than a BRP cover.
2021 RT Limited
-
Very Active Member
Originally Posted by Mazo EMS2
I have the rack on our RT as well, and I use a full cover, UltraGuard. Works great! AND cheaper than a BRP cover.
Ultra Guard 1/2 or full cover will work with a larger windshield or rack and probably both and 1/4th the price of a BRP cover.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
My solution
This link is to a thread I did on the same problem several years ago.
http://www.spyderlovers.com/forums/s...l=1#post659314
-
Very Active Member
Ultra guard is on our rts.e6
With a luggage rack and a suitcase on top of that
Great cover
And some say it's not rain proof but I have never had a drop get through
Sent from my SAMSUNG-SM-T337A using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|