-
-
Active Member
Easy DIY
Originally Posted by CapeSpyder
Spyderpops or Tricled for the rear brake/turn Led set up, What are people using? There just doesn't seem to be enough lights in the back.
Looking for the next set of farkles and there seems to be a big price difference.
I got these:
http://www.lamonstergarage.com/rt-br...rake-run-turn/
And they truly are DIY! And I am very, VERY mechanically challenged.
Everything I needed was included, and except for help getting the read panel on [sometimes you need a third hand!], I did everything by myself in about 90 minutes.
Your signature indicates a 2016 RT-SE; these will work and look great on that!
GWRRA Virginia District Director. Because we don't care what you ride, just that you ride safe!
Tri Axis Handlebars / CB & upgraded antenna / GPS & Cell phone integration / Trailer Hitch / FOBO TP Monitors / Black & Pearl Ultimate seat
Spyder Cuff / Custom Paint / Laser Alignment / Flag Poles / 3rd & 4th Rear Brake & Turn LED's / Gear Brake Decelerometer Module
A whole bunch of lights from LaMonster and SpyderPops
-
Very Active Member
You might look at custom dynamics (www.customdynamics.com). They make a running/brake/turn signal module that fits in the groove at the top of the trunk and looks like it grew there. Very bright.
http://www.customdynamics.com/can_am...ED_Taillights_
2020- RT Limited
Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
FOBO2 TPMS
Aluma MCTXL trailer
BRP hitch
Big Bike Parts wiring harness
Permanent Smile!!!
-
Originally Posted by OverHillAndDale
I have that one, dealer installed with turn signal kit, cause he installed the red/Amber one
-
Very Active Member
Spyderpops all the way.
http://spyderpops.com/rt-brt-rear-li...g-n-play-easy/
Best price and free shipping.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
I also have the third brake light that stays on with the parks and gets brighter with brakes applied. I have the brake part of the the third brake light and the led strips wired to a strobe unit that flashes the them. The regular brakes light work as designed by BRP.
Lastly, I have the reflectors on the sides replaced with LEDS and I have a little unit that hooks in line that flashes them in time with the signal lights, this is so cars that are pulling up along side me cans see my intention to change lanes or turn.
-
Very Active Member
-
Originally Posted by kitkat61
I got these:
http://www.lamonstergarage.com/rt-br...rake-run-turn/
And they truly are DIY! And I am very, VERY mechanically challenged.
Everything I needed was included, and except for help getting the read panel on [sometimes you need a third hand!], I did everything by myself in about 90 minutes.
Your signature indicates a 2016 RT-SE; these will work and look great on that!
Thats one of the kits I'm looking at. It's less expensive then the Tricled kit.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|