-
SpyderLovers Sponsor
Squared Away in Kalamazoo, MI!!!
We have been invited to Michigan, June 26-27, our old home State! Our Host, Al, will post up the schedule he has so far. We are thrilled to come home, and to see as many of our friends that can make it. Even if you don't need to be Squared Away, come meet your fellow Michiganders! We have a few slots left, and I would be pleased to meet as many Spyderlovers as I can! See you there!!! Joe and Ann (The Amazing SpyderAnn!)
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
What..!!
Like a home coming dance... hope you have a bunch of pop-ins to remenise with.... you know what to do...get them squared away....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
8 am on the 26, see you then
-
SpyderLovers Sponsor
Confirmed
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Squared away in Kalamazoo, Michigan
Originally Posted by cptjam
We have been invited to Michigan, June 26-27, our old home State! Our Host, Al, will post up the schedule he has so far. We are thrilled to come home, and to see as many of our friends that can make it. Even if you don't need to be Squared Away, come meet your fellow Michiganders! We have a few slots left, and I would be pleased to meet as many Spyderlovers as I can! See you there!!! Joe and Ann (The Amazing SpyderAnn!)
The place is 3035 South 26Th St, Kalamazoo, Mi.
My cell is 269-601-4016
Below is my understanding of who will be here and when. It would be most appreciated if you can either PM me or add a confirmation post to this thread.
Joe is a glutton for punishment and says there is always room for one more. If I've left any one off who has asked for a slot please let me know. On 6/27/16 there will be some pinconning cheeze and brots to nosh on during the day. There will be plenty of water available to drink and good people to chat with while you are waiting for your time. I look forward to meeting all of you and chatting.
Sunday June 26:
Frank Gedert
@ 0800
Pemberville OH
Kevin Mortensen
aka kmort44cell @ 0900
Jee Maurer @1000
Susan Kaleita @1100
Sandee @1200
Ronda @ 1300
Boogie @ 1400
Ron Bogert
7958 Willis Rd.
Brown City, MI 48416
Mark Grigsby @ 1600
Sue Green Lake, WI @1700
Mon June 27:
Scotty @0800
Tricky Dick aka Dick Harper @ 0900
Bob Finlayson @1000
7013 Leonard NW
Coopersville Mi. 49404
Jim Boyer @ 1100
Larry Allman @1200
11576 Vestaburg Michigan 48891
Kenneth Jones @ 1300
Laport, In + 3 hours of installation of farkles
antone.schweitzer@gmail.com_ @1400
Ride safe always
Al
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
SpyderLovers Sponsor
Looks great
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Larry allman confirmed. By the way I might need rear breaks, parking brake acting up. PM me cost. And if I can get it done same timing.
-
Confirmed for Monday
Al - all set for 1300 on Monday.
I have been learning more about my Spyder, and have added all the farkles I had to bring, so just planning laser alignment at the present time, but by then I may have more.
Ken Jones
-
Very Active Member
Originally Posted by Indiana Ken
Al - all set for 1300 on Monday.
I have been learning more about my Spyder, and have added all the farkles I had to bring, so just planning laser alignment at the present time, but by then I may have more.
Ken Jones
Thanks for the confirmation Ken. This is great news as this will allow others to come and get their bikes Squared Away. The heads up on the change of plans is appreciated. This will give Joe and Ann some wiggle room.
Al
Last edited by IGETAROUND; 05-31-2016 at 08:23 PM.
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Very Active Member
Squared away in Kalamazoo Michigan
Originally Posted by Larry rt
Larry allman confirmed. By the way I might need rear breaks, parking brake acting up. PM me cost. And if I can get it done same timing.
Thanks Larry for the confirmation. I would imagine Joe might like a tad more information to make a determination of what needs attention with your parking brake. I will defer to him as to time and costs.
Al
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Active Member
Will see you then...
Originally Posted by IGETAROUND
add a confirmation post to this thread.
Be there on June 27th at 11 am.
Jim
-
SpyderLovers Sponsor
Thanks
See you there, Jim!
Thanks for confirming. Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
First stop
Santa Rosa, CA. Doing alignments here Friday and Saturday. Sunday in Tracy, CA, Then the cross country begins! We are shooting for Niles on Wednesday night, or Thursday. An event there, then Kalamazoo on Sunday Morning!!! Can't wait! Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
In Michigan!!
We are in Niles, Mi. Will be up and rolling over bright and early!! See you there!! Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Are we still doing the barbecue? I think we should do it on Sunday. Just let me know what day and time.
ToM
Keep it simple
Life is good
Last edited by 2ndChildhood; 06-01-2016 at 03:51 AM.
-
Very Active Member
Squared away in Kalamazoo, Michigan
Originally Posted by 2ndChildhood
Are we still doing the barbecue? I think we should do it on Sunday. Just let me know what day and time.
ToM
Keep it simple
Life is good
Tom , that sounds like a grand idea, Sunday it is!! Whatever time you normally would get hungry and want to graze is fine with me. Bring it on and I'll augment with other munchies and drinks.
Al in Kazoo
Last edited by IGETAROUND; 06-01-2016 at 07:21 PM.
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Very Active Member
I imagine you do, but Tom wants us to install shock adjusters. We have the tools, but need a bench vice to hold the shock while we compress the spring. If you have one, great! He will contact you on a time. Since he will have the shocks off, we can do it in about an hour.
Ha! Next to riding and wrenching, eating is what we do best!! I'm 6 Sigma qualified in eating! Practically an art form! 😎 Joe
I found a place locally that can install them for me.
I planing on arriving about 11 AM on Sunday the 26th with the Brats and cheese. I am really looking forward to meeting up with other Michigan Spyder's riders. Should be a great day for a barbecue.
ToM
Enjoy the Ride
Life is Good
Last edited by 2ndChildhood; 06-07-2016 at 12:14 PM.
-
Very Active Member
I'm good now. Found a place locally that will install them for me.
ToM
Enjoy the Ride
Life is Good
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|