Results 1 to 5 of 5
  1. #1
    Active Member spyderryder53's Avatar
    Join Date
    Jul 2014
    Location
    Hanover CT
    Posts
    156
    Spyder Garage
    0

    Default FIRST LIMP HOME TODAY

    Hi I got my first limp home today and pulled the code it says PO340 but I don`t see a match in the code search any ideas what it is
    thanks in advance. I have a 2014 RTS SE6
    Leon
    2022 marsala red RTL
    AND

    2014 RT S SE-6 COGNAC, 2010 RT 622 TRAILER TIMELESS BLACK
    BRP trailer hitch, Utopia back rest, Baja Ron sway bar , heim links. Elka stage 2 shocks front and rear.
    TricLed fender lights, saddlebag lights and mirror lights. LED headlights and fog lights, Wide vu mirrors.
    spyderpops LED bumpskid ,zippered cargo bag linings, Laser Alignment by Netzleys Tire, Stebal air horn
    stant gas cap,( Dimple oil plugs REMOVED ) JT dash mount.
    (Onboard) Lamonster Garage air compressor and intelliboost charger.

  2. #2
    Very Active Member spyderCodes's Avatar
    Join Date
    Jan 2016
    Location
    PA
    Posts
    691
    Spyder Garage
    0

    Default

    from spydercodes:
    P0340,
    ECM ,Crankshaft position sensor(CPS).
    Damaged CPS damaged or disconnected wires ECM output pins.
    Make sure sensor connector is fully inserted
    Measure voltage between harness connector: CAPS-PIN 3 & ground
    (expected value 11 to 13 VDC).
    Measure resistance from connector: ECM A-E2 to (CPS) CAPS-2

    (expected value <2 Ω).
    Measure resistance from connector: ECM A-D4 to CAPS-1

    (expected value <2 Ω)

  3. #3
    Active Member spyderryder53's Avatar
    Join Date
    Jul 2014
    Location
    Hanover CT
    Posts
    156
    Spyder Garage
    0

    Default

    Quote Originally Posted by spyderCodes View Post
    from spydercodes:
    P0340,
    ECM ,Crankshaft position sensor(CPS).
    Damaged CPS damaged or disconnected wires ECM output pins.
    Make sure sensor connector is fully inserted
    Measure voltage between harness connector: CAPS-PIN 3 & ground
    (expected value 11 to 13 VDC).
    Measure resistance from connector: ECM A-E2 to (CPS) CAPS-2

    (expected value <2 Ω).
    Measure resistance from connector: ECM A-D4 to CAPS-1

    (expected value <2 Ω)
    thank you sir
    Leon
    2022 marsala red RTL
    AND

    2014 RT S SE-6 COGNAC, 2010 RT 622 TRAILER TIMELESS BLACK
    BRP trailer hitch, Utopia back rest, Baja Ron sway bar , heim links. Elka stage 2 shocks front and rear.
    TricLed fender lights, saddlebag lights and mirror lights. LED headlights and fog lights, Wide vu mirrors.
    spyderpops LED bumpskid ,zippered cargo bag linings, Laser Alignment by Netzleys Tire, Stebal air horn
    stant gas cap,( Dimple oil plugs REMOVED ) JT dash mount.
    (Onboard) Lamonster Garage air compressor and intelliboost charger.

  4. #4
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default There you have it....

    From the Alpacas mouth... good reason to down load the spyder codes app and carry it with you. More than likely it will clear. Have not seen many of those and may be a glitch. If after you park it remove the key and give it an hour computers will store the codes and you can ryde on. If not or it returns then head to the dealer....
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  5. #5
    Active Member
    Join Date
    Sep 2011
    Location
    Austin TX
    Posts
    89
    Spyder Garage
    0

    Default Give it an Hr.

    Why should it take a CPU one hr. to reset it self? Is it the same reason you need to walk 100ft from the Spyder to reset the key code.
    Allenr

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •