Lamonster F3 H4 LED headlight install

[Lamonster]

The video some of you have been waiting for.

[lilwill]

So are all the bulbs already "clocked for bulb aiming ". ?


Sent from my iPhone using Tapatalk

[Nyparrothead]

Any chance of one for a standard F3 or S model?

mark

[lilwill]

For standard F3 just follow your manual I changed mine in about 15 - 20 mins super easy only thing that had to be removed was the 6 screws that holds the gauges and the plastic under it. Super easy and the lights fit great


Sent from my iPhone using Tapatalk

[Lamonster]

So are all the bulbs already "clocked for bulb aiming ". ?


Sent from my iPhone using Tapatalk

They will be from now on. Now that we know the fixed location. There is an adjustment the end user can make too.

[Lamonster]

For standard F3 just follow your manual I changed mine in about 15 - 20 mins super easy only thing that had to be removed was the 6 screws that holds the gauges and the plastic under it. Super easy and the lights fit great


Sent from my iPhone using Tapatalk

If you pull the top off you can access and change the bulbs. That's how I did my last one but it's still tight and if you have a windshield it's a little more of a pain. If you did it in 20 min. you did good

[Lamonster]

Any chance of one for a standard F3 or S model?

mark

That's the next one we'll be doing.

[lilwill]

They will be from now on. Now that we know the fixed location. There is an adjustment the end user can make too.

Ok thanks, I installed mine last week. Tonight I will go back in and adjust them. The kit is a clean set up and so far I like them.

[Lamonster]

So are all the bulbs already "clocked for bulb aiming ". ?


Sent from my iPhone using Tapatalk

I just played with clocking these again and this is what gives you the best light. Pretty much where they come stock.

[Nyparrothead]

I just played with clocking these again and this is what gives you the best light. Pretty much where they come stock.

Hi

i boughtna set from you last month and am not sure what you mean but clocking? I have not installed mine as of yet...

mark

[No 2817]

Hi

i boughtna set from you last month and am not sure what you mean but clocking? I have not installed mine as of yet...

mark

I set both of mine so they both perfectly level. Light flair on the left side. I guess this is not correct. I should have left them as they where.

First question is do you set them both the same or rotate one clockwise and the other counter clockwise.
(thanks for the picture BIG help)

[juscuz]

They will be from now on. Now that we know the fixed location. There is an adjustment the end user can make too.

I marked the stock headlight aim on the wall before and after the changeover and it was right on the money. Nice and bright to go along with my led fogs and led fog rings. Took about an hour because I also had to remove the windshield, Happy with products.....

[Lamonster]

Hi

i boughtna set from you last month and am not sure what you mean but clocking? I have not installed mine as of yet...

mark

I set both of mine so they both perfectly level. Light flair on the left side. I guess this is not correct. I should have left them as they where.

First question is do you set them both the same or rotate one clockwise and the other counter clockwise.
(thanks for the picture BIG help)

They are pretty much perfect out of the box. You can adjust them to your liking if you want or leave them as is. I know of one guy that needed adjustment and that's it. It is nice to have that option.

[No 2817]

They are pretty much perfect out of the box. You can adjust them to your liking if you want or leave them as is. I know of one guy that needed adjustment and that's it. It is nice to have that option.

Thanks been on the forum for awhile, had the 2008 gs premier edition so know the Spyder pretty well... Just got F3-T.. I can not leave well enough alone. ( nothing worse then "I can do better") Anyway I changed how you had the lights set-up when I got them. The picture op put up has it at the first notch (tick mark) is this correct, and should they both be the same rotation direction.

Thanks in advance (will be ordering the Swaybar next)

Chris

[Dlr]

I had installed the Xenon Depot LEDs and was not impressed with the light output. I ordered Lamont's LED kit and followed the video for install (way easier than when I installed the other LEDs). Much better light output and a breeze to install. Thanks Lamont for the fast delivery.