I have a 2015 RT Limited with Zumo 590 how hard is it to put this lock on do you have to remove the cradle from the bike, then put back on or can you just put the lock on whats their?
BAJARON SWAY BAR PLUS LINKS
BAJARON SPACER
ULTIMATE SEAT WITH GAS DOOR
JT SHELF BAR
SPYDERFLAP
BUMPSKID
XM RADIO
POWER OUTLET
LAMONSTER CUP HOLDER
2015 RT LIMITED
PIN STRIPPING BY MACK THE KNIFE
RIVCO FLAG HOLDER
SENA SM10 BLUE TOOTH
LAMONSTER FBB HIGHWAY BRACKET WING BOARD BLK
BPR TRAILER HITCH
KRADELLOCK FOR THE GPS
BIG BRAKE PEDAL BY TRICLED
Go to the web site and look at the instructions page. If you can tie your shoes you can install a Kradellock. You install it between the GPS cradle and mount.
Last edited by JayBros; 03-28-2016 at 08:31 PM.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
****************************** Cognac 2014 RT-S
When I first saw these in a thread a few months ago it looks like an overcomplicated and overpriced accessory. Now a few months later and kind of tired of taking the GPS off every time I stop somewhere (on long trips) and not even bothering to put it on at all on shorter trips, after seeing this thread I also decided to get one and just leave the stinkin thing on all the time. So I ordered one Friday (also asking Bob for the longer bolts to which he replied right away) and it is also out for delivery TODAY. CA to FL over the weekend... impressive. I'll also update later after install. *Also, part of my reasoning is I have too much stuff paired with my Sena 10u - phone, GPS, SR10 (for ham radio/FRS with group), intercom, etc. so I figure if I have GPS mounted full time I can delete my phones direct pairing and perhaps simplify Sena setup. We'll see...
Last edited by SpyderSteveFL; 03-28-2016 at 10:36 AM.
NEW/CURRENT (Wife's Bike, I ride Goldwing/Africa Twin)
2023 RT Limited Petrol Blue Metallic
Working on the upgrades... so far... Show Chrome Isolator Fuse Block, Tackform Adventure Wireless charger phone mount
OLD/TRADED
2015 RT Limited Intense Red Pearl
Farkles: Ultimate Tallboy seat, FOBO, JT Dash Mount, Lamonster Spyder Cuff, Kradellock, TricLED lighting - fenders, A-Arms, saddlebags, run/brake, Custom Dynamics high brake light, brake modulator, Drink2Go passenger, MUTH turn signal mirrors, Bajaron sway bar, Kuryakyn ISO grips, SpyderTV front grilles & rear trunk organizer, homemade trunk light
Pending: Elka shocks, Yokohama S Drive rear tire, EVO 595 front tires, Centramatic balancers, Neutrino black box
Installed mine a couple of weeks ago and it was pretty easy. Installs between the Existing GPS cradle and the bike mount.
I talked to Bob (Kradellock Guy) about the longer bolts being needed for the RT's. I think he even went to the local Spyder dealer to take measurements.
So package came and I installed it. Took less than 10 min, including interruption. Hardest part to getting tools together. When I got interrupted I guess I missed one picture with the factory mount off, sorry about that Anyway...
1. Remove existing/factory cradle via 4 hex head screws. My screws were 9/32" head. I left the existing washers in place.
2. Held Kradellock behind cradle (loose part on wire) and inserted the proper 4 screws. Screw goes through the cradle, through the holes in the kradellock and into the mount on the Spyder. The set came with 2 sets of 4 screws - 1 set philips head 1 5/8" long and 1 set hex head 2+ inches long. I used the philips head as they were perfect length.
3. Screwed the 4 screws back into the bracket/mount remaining on the bike (swivel head) in the same position where screws came out
4. That's it - open kradellock with key, insert GPS then close/push down on top of kradellock until it rests on GPS cradle and while holding down push in the pin in the center of the lock to secure it in place. Use key to unlock and pop kradellock open to remove GPS.
Had to be pretty much the easiest install of anything ever - remove 4 screws and re-install with 4 longer screws with kradellock sandwiched in between. Hope the pictures help, sorry I missed the one with cradle hanging and the bracket on bike.
Last edited by SpyderSteveFL; 03-29-2016 at 08:34 AM.
NEW/CURRENT (Wife's Bike, I ride Goldwing/Africa Twin)
2023 RT Limited Petrol Blue Metallic
Working on the upgrades... so far... Show Chrome Isolator Fuse Block, Tackform Adventure Wireless charger phone mount
OLD/TRADED
2015 RT Limited Intense Red Pearl
Farkles: Ultimate Tallboy seat, FOBO, JT Dash Mount, Lamonster Spyder Cuff, Kradellock, TricLED lighting - fenders, A-Arms, saddlebags, run/brake, Custom Dynamics high brake light, brake modulator, Drink2Go passenger, MUTH turn signal mirrors, Bajaron sway bar, Kuryakyn ISO grips, SpyderTV front grilles & rear trunk organizer, homemade trunk light
Pending: Elka shocks, Yokohama S Drive rear tire, EVO 595 front tires, Centramatic balancers, Neutrino black box
NEW/CURRENT (Wife's Bike, I ride Goldwing/Africa Twin)
2023 RT Limited Petrol Blue Metallic
Working on the upgrades... so far... Show Chrome Isolator Fuse Block, Tackform Adventure Wireless charger phone mount
OLD/TRADED
2015 RT Limited Intense Red Pearl
Farkles: Ultimate Tallboy seat, FOBO, JT Dash Mount, Lamonster Spyder Cuff, Kradellock, TricLED lighting - fenders, A-Arms, saddlebags, run/brake, Custom Dynamics high brake light, brake modulator, Drink2Go passenger, MUTH turn signal mirrors, Bajaron sway bar, Kuryakyn ISO grips, SpyderTV front grilles & rear trunk organizer, homemade trunk light
Pending: Elka shocks, Yokohama S Drive rear tire, EVO 595 front tires, Centramatic balancers, Neutrino black box
THANKYOU!!THANKYOU!!THANKYOU!!THANKYOU!!THANKYOU!T HANKYOU!!THANKYOU!!THANKYOU!!THANKYOU!!THANKYOU!!T HANKYOU!!THANKYOU!!THANKYOU!!
I'm glad that I've just been staring at the packages. Your pictures made PERFECT sense of the entire process!
OK ... had to order one! I had a similar lock for my old Garmin 6210 and I missed the ability to simply leave the GPS on the bike when I went for a pee
Looks like I'll be ordering one of these tomorrow. Thanks for all the input.
Current Modes of Transportation:
2014 Can Am Spyder RT LTD / Pearl White
2014 Can Cam Commander 1000 Side X Side / Yellow and Black
2007 Kawasaki Nomad Cruiser 1600 / Black with lots of Chrome
2006 Ford F-150 Bronze and Chrome
2014 ASICS Gel-Nimbus Running Shoes / Blue and White
While I believe anyone with a nutdriver or socket, and screwdriver could do this, I edited the written part of my instructions to be a little more specific - just in case it makes someone a bit more comfortable...
NEW/CURRENT (Wife's Bike, I ride Goldwing/Africa Twin)
2023 RT Limited Petrol Blue Metallic
Working on the upgrades... so far... Show Chrome Isolator Fuse Block, Tackform Adventure Wireless charger phone mount
OLD/TRADED
2015 RT Limited Intense Red Pearl
Farkles: Ultimate Tallboy seat, FOBO, JT Dash Mount, Lamonster Spyder Cuff, Kradellock, TricLED lighting - fenders, A-Arms, saddlebags, run/brake, Custom Dynamics high brake light, brake modulator, Drink2Go passenger, MUTH turn signal mirrors, Bajaron sway bar, Kuryakyn ISO grips, SpyderTV front grilles & rear trunk organizer, homemade trunk light
Pending: Elka shocks, Yokohama S Drive rear tire, EVO 595 front tires, Centramatic balancers, Neutrino black box
Hi All
Thinking outside the square, if you want a cheap quick fix to keep your friends from playing tricks, or worse some low life stealing your Zumo, I put a Plastic Cable Tie on the shaft of the release lever. With the tie in place on the shaft you cannot depress the release lever to remove the Zumo. When done just cut the plastic tie off.
Obviously the Kradlelock is a more robust and preferred deterrent but I find the zip tie handy as a quick fix
2014 RTL, Akropovic Muffler, Spyder Attitude Cat Bypass, Sway Bar, Four Eyes Headlight Kit, BRP Air Intake Scoops, Stebel Nautilus, 3rd, 4th & LED Ring Brake Lights.