The Zumo 590 that was part of my OTD deal came with a complete set of accessories amongst which was a protective cap for the contact pins on the GPS cradle and is locked in place by the Kradellock. I find it a much better option than trying to stretch BRP's rubber boot over the Kradellock and GPS mount when I don't ride with the Zumo installed, like during local running around. It's worth a check with Garmin to see if there is such a device for models other than the 590 if one has a different one. JMO.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
****************************** Cognac 2014 RT-S
BRP's rubber boot .... if the Kradellock is not locked down, I can fit the top of the boot in the gap between the lock and GPS cradle.
But, that Zumo protective cap does look more secure.
Order mine last night will update when it arrives thanks for all the input
Sent from my iPhone using Tapatalk
BAJARON SWAY BAR PLUS LINKS
BAJARON SPACER
ULTIMATE SEAT WITH GAS DOOR
JT SHELF BAR
SPYDERFLAP
BUMPSKID
XM RADIO
POWER OUTLET
LAMONSTER CUP HOLDER
2015 RT LIMITED
PIN STRIPPING BY MACK THE KNIFE
RIVCO FLAG HOLDER
SENA SM10 BLUE TOOTH
LAMONSTER FBB HIGHWAY BRACKET WING BOARD BLK
BPR TRAILER HITCH
KRADELLOCK FOR THE GPS
BIG BRAKE PEDAL BY TRICLED
If you ordered the Kapplock also; you didn't have to...
But I'm going to use mine to make it tougher for the -bags to steal my Go-Pro.
(It replaces the big thumbwheel "nut' that is used on any of the Ram accessory mounting arms...)
installed it on Friday it's well made and I feel Secure leaving my GPS on the bike but one problem was the GPS keeps flopping down is there any way to tighten up the up-and-down motion on the mount thanks for any help
BAJARON SWAY BAR PLUS LINKS
BAJARON SPACER
ULTIMATE SEAT WITH GAS DOOR
JT SHELF BAR
SPYDERFLAP
BUMPSKID
XM RADIO
POWER OUTLET
LAMONSTER CUP HOLDER
2015 RT LIMITED
PIN STRIPPING BY MACK THE KNIFE
RIVCO FLAG HOLDER
SENA SM10 BLUE TOOTH
LAMONSTER FBB HIGHWAY BRACKET WING BOARD BLK
BPR TRAILER HITCH
KRADELLOCK FOR THE GPS
BIG BRAKE PEDAL BY TRICLED
I think that you just need to go back in, and tighten up the four screws that hold the Kradellock to the clamps.
I believe that the bottom screw kind of attaches to the "solid" end of the clamp, and the top one attached to the part that tightens down to provide the clamping force.
That's very possible: mine could be backwards!
One end goes solidly into the body of the clamps, and the other one hooks to the end that pivots in and out as the tightening force is changed...
THANKS GUYS FOR THE HELP GOT IT ALL TIGHTEN DOWN AND NO PROBLEM WITH MY ROBIN HOOD SUN SHADE STILL FITS ONE LESS THING TO DO AT PIT STOPS
BAJARON SWAY BAR PLUS LINKS
BAJARON SPACER
ULTIMATE SEAT WITH GAS DOOR
JT SHELF BAR
SPYDERFLAP
BUMPSKID
XM RADIO
POWER OUTLET
LAMONSTER CUP HOLDER
2015 RT LIMITED
PIN STRIPPING BY MACK THE KNIFE
RIVCO FLAG HOLDER
SENA SM10 BLUE TOOTH
LAMONSTER FBB HIGHWAY BRACKET WING BOARD BLK
BPR TRAILER HITCH
KRADELLOCK FOR THE GPS
BIG BRAKE PEDAL BY TRICLED
Just installed the kradellock on my 2015 RTL installed in about 20 min. Gave Bob the size of the screws on the cradle one from the top and on from the bottom
they were both 1" in length he sent me the new screws,they fit perfect would recommend this lock
Highly recommend this product, especially with the WONDERFUL PHOTOS that make it stupid-simple to install! I am mechanically challenged and even I was able to install it in less than 10 minutes. Best of all, my GPS sun shade (Glare Stomper #322) is not in the way at all. So didn't have to change a thing, other than no longer having to remember to remove it when I stop! So awesome! And $125 (including tax (none) and shipping (also none)) is less than any other Farkle I've have added!! When you consider what it would cost to replace the GPS, it's worth it.
So thank you, thank you, thank you to everyone who showed me the way.
GWRRA Virginia District Director. Because we don't care what you ride, just that you ride safe!
Tri Axis Handlebars / CB & upgraded antenna / GPS & Cell phone integration / Trailer Hitch / FOBO TP Monitors / Black & Pearl Ultimate seat
Spyder Cuff / Custom Paint / Laser Alignment / Flag Poles / 3rd & 4th Rear Brake & Turn LED's / Gear Brake Decelerometer Module
A whole bunch of lights from LaMonster and SpyderPops