As we all know the new air scoops for the 2013 heat recall fix make it impossible to continue to use the BRP air deflectors. Well, they also make it impossible to use the Baker Air Wings Inner Panels. I was starving for good air flow onto me since the fix, partly because I have the F4 tall and wide windshield. Here's how I solved the problem of not enough air flow.
I removed the upper Air Wing that is part of the Spyder kit. It is only 1/2 the size of the lower panel. I replaced it with the panel they make for the Goldwing. I ordered the GL1800 replacement wing. I made a new bracket from 1/8" x 3/4" steel bar to provide full support to the full size panel. I reused the hardware from the inner panel and fastened the new panel with the hardware that held the 1/2 size panel. The sketch shows the approximate size of the new bracket. I drew it full size and used it as a pattern for bending and drilling the bar. Cleaned and spray painted the bar.
Last edited by IdahoMtnSpyder; 08-11-2015 at 07:56 PM.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Two thumbs up for creativity. Looks good too. My father taught me that if no one makes something that you want, make it yourself. He would be proud of you.
Theres a way...Well done and looks great. You may be a step ahead of Baker... looks like it does the job. Brp gives you credit on theres so for those with the oem deflectors keep it in mind and remind the dealer.
Gene and Ilana De Laney Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Brp gives you credit on theres so for those with the oem deflectors keep it in mind and remind the dealer.
That part of the recall must be a grease covered ball. My dealer keeps dropping it! But I'll keep after them until I get it!
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Brp gives you credit on theres so for those with the oem deflectors keep it in mind and remind the dealer.
Originally Posted by WasWinger
That part of the recall must be a grease covered ball. My dealer keeps dropping it! But I'll keep after them until I get it!
I got my reimbursement today from the dealer! Can you believe it? They sent me a check for $162. Real money, not just a store credit. The necessary forms and how to process the claim are not in the recall instructions. The service manager had to find it elsewhere, but he did, and got it done! I had the clear adjustable deflectors.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.