Results 1 to 9 of 9
  1. #1
    Active Member bhfromme's Avatar
    Join Date
    Oct 2011
    Location
    Southern Maine
    Posts
    293
    Spyder Garage
    0

    Default 08 squeaky brakes

    Not complaining. Love my 08 GS. But the brakes squeak to a point where it's almost embarrassing. Dealer says it's unique to the 08s and that it's nothing to worry about. But does anyone know a way to quiet down these brakes?
    Bill H.

  2. #2
    SpyderLovers Sponsor BajaRon's Avatar
    Join Date
    Aug 2007
    Location
    Greeneville, TN
    Posts
    13,579
    Spyder Garage
    0

    Default

    The 08 came with semi-metallic brake pads. Very good stopping power, very noisy.

    It is embarrassing but not a problem beyond that. You can get some CRC or similar brake pad spray. You can put CRC or similar quieting compound to put on the back of the pads. You can lightly sand the rotors. You can stop very hard multiple times to heat up and bed the pads again. You can pressure wash the pads.

    But nothing will work for very long and the squeal will start to come back.

    You'll have to change pads to get rid of the squeal permanently. Some work better than others.
    Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)

    Only SLOW people have to leave on time...





  3. #3
    Very Active Member
    Join Date
    Mar 2013
    Location
    Oz
    Posts
    944
    Spyder Garage
    0

    Default same problem - and a thought

    My 09 RS had the same problem and it went beyond embarrassing! I know exactly what you mean. Paid the dealer to do something - didn't work. Tried other suggestions (all over this forum) - didn't work. Sold the bike (got an ST, love it) - new owner is a real motorbike afficionado and he later posted that the brake rotor was warped. Now whether I have got the 'brake rotor' bit right or wrong I'm not sure, but the big round bit of metal near the parking brake. This solved it completely. Hope you can interpret my non-mechanical gibberish (hubby is not home, he would know exactly what it's called).

  4. #4
    Active Member bhfromme's Avatar
    Join Date
    Oct 2011
    Location
    Southern Maine
    Posts
    293
    Spyder Garage
    0

    Default

    Quote Originally Posted by BajaRon View Post
    The 08 came with semi-metallic brake pads. Very good stopping power, very noisy.

    It is embarrassing but not a problem beyond that. You can get some CRC or similar brake pad spray. You can put CRC or similar quieting compound to put on the back of the pads. You can lightly sand the rotors. You can stop very hard multiple times to heat up and bed the pads again. You can pressure wash the pads.

    But nothing will work for very long and the squeal will start to come back.

    You'll have to change pads to get rid of the squeal permanently. Some work better than others.
    Thanks Ron. Any recommendations on what pads to use?
    Bill H.

  5. #5
    Registered Users
    Join Date
    Jun 2015
    Location
    Houston
    Posts
    3
    Spyder Garage
    0

    Default My 2008 squeek too!

    Quote Originally Posted by bhfromme View Post
    Not complaining. Love my 08 GS. But the brakes squeak to a point where it's almost embarrassing. Dealer says it's unique to the 08s and that it's nothing to worry about. But does anyone know a way to quiet down these brakes?
    Mine too! Squeak and Moan, I even adjusted alignment on back wheel several times, does not seem to help. I sorta wonder, if when they need changing, I could put an Organic "Softer Pad" on? I have 11 k only....

  6. #6
    Very Active Member Big Arm's Avatar
    Join Date
    Jul 2008
    Location
    Sioux City, Iowa and Tucson, AZ
    Posts
    2,136
    Spyder Garage
    0

    Default

    Quote Originally Posted by bhfromme View Post
    Thanks Ron. Any recommendations on what pads to use?
    PM BajaRon or send him an email.......He sells them and they are the best !

    ....and we're gonna ride, we're gonna ride.....

    ride like the one-eyed Jack of Diamonds, with
    the devil close behind,.....we're gonna ride....

    2008 GS.....PE # 2888

  7. #7
    Registered Users 109spyder's Avatar
    Join Date
    Jul 2015
    Location
    Australia
    Posts
    95
    Spyder Garage
    0

    Default

    Mine to! RS 2009! Squealing like a little pig caught in the fence!

  8. #8
    Active Member
    Join Date
    Jun 2015
    Location
    Hobart, IN.
    Posts
    165
    Spyder Garage
    0

    Default Sqeaky brahes

    My cure has been to get some high pressure pipe gasket material ( from a pipe fitter buddy) and cut a piece to fit between pad and piston in caliper. Works on everything I put it on..............

  9. #9
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    Big Arm is right; BajaRon can fix you up right!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •