-
Very Active Member
-
Very Active Member
You'll need one of these to go from the gopro to a RAM arm to JT's thingy:
http://www.gpscity.com/ram-mount-gop...-hol-gopr.html
and here's an example of a RAM arm (they are various lengths):
http://www.gpscity.com/ram-mount-med...am-b-201u.html
I get my stuff from gpscity.com.
Last edited by wyliec; 07-19-2015 at 05:54 PM.
-
http://www.google.com/#q=gopro+mount...yderlovers.com
This link will take you to a bunch of spyderlovers.com threads on mounting the GoPro.
MEP
2019 F3 Limited
-
Very Active Member
Originally Posted by MSGTDOC
Ok folks I must be retarded because the search function never gets me what I'm looking for ..... I know there was a whole thread on mounting but for the life of me I can't locate it.
Probably because go is 2 letters and pro is 3 letters. The search function on this site, and others that use the same forum s/w, will not search on words less than 4 letters. In that case Google works good. Try a search like this using Google: go pro mount site:spyderlovers.com
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Here's what JT did; I have the parts listed above:
http://www.spyderlovers.com/forums/s...l=1#post825837
gopro is 5 letters, and when you type in "gopro+mounting" in the advanced search here, you get the link above.
-
Active Member
Originally Posted by MSGTDOC
I have the jt dash mount and tried the gopro on it and it worked great. The problem for me was too many bugs hit the windshield. Had the same problem when I had it mounted behind the windshield on my 2 wheeler. So I just used one of the adhesive mounts on top of the mirror on my rt and it works great. Was worried about it coming loose or off. No problems so far and have used it on many trips so far. I seldom have a bug hit the camera lense on the gopro, unlike the windshield. I also installed a couple of power plugs on the speaker covers and run power to the camera in good weather. I still use the jt mount for my gps with an X mount.
-
Very Active Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|