-
Registered Users
Bolt Size
My brain isn't working and I can't remember the size of the body bolts. Anyone remember offhand?
"I <3 attention!"
-DD
#670
-
Doru the Destroyer-Spyder Photo Investigator
Looking in my Spyder Service Manual....can you be more specific?
2013 "Silver Dream" GG Taurus
2008 "Silver Dream" Spyder RS
Einstein's theory of drag racing: Time and Speed are Relative.
Shut up and Race!
-
Registered Users
Originally Posted by docdoru
Looking in my Spyder Service Manual....can you be more specific?
The bolts that hold the fairings together. It's the most common bolt used throughout the Spyder. It has a torx head.
"I <3 attention!"
-DD
#670
-
Its a size T30 torx head with a M6 coarse thread size.
-
Originally Posted by tjfischer
Its a size T30 torx head with a M6 coarse thread size.
Hey where can I get extra torx bolts as well as the plastic panel fasteners? I have founf myself to be missing one of the bolts and those plastic plugs get loose after taking them in and out several times.
-
Very Active Member
-
Registered Users
Originally Posted by carbolic
Hey where can I get extra torx bolts as well as the plastic panel fasteners? I have founf myself to be missing one of the bolts and those plastic plugs get loose after taking them in and out several times.
Dealer charged me $5 per bolt! There are a few place online that have them for $.50 or less though. Just look for the M6x20 bolts.
Oh, and the pins... $12 at the dealer!
"I <3 attention!"
-DD
#670
-
Very Active Member
Originally Posted by daddydarko
Dealer charged me $5 per bolt! There are a few place online that have them for $.50 or less though. Just look for the M6x20 bolts.
Oh, and the pins... $12 at the dealer!
I ordered 4 and they were @$5 a piece at my dealer also. They will be mailing to me once they get them from BRP.
-
Motorbike Professor
Originally Posted by daddydarko
Dealer charged me $5 per bolt! There are a few place online that have them for $.50 or less though. Just look for the M6x20 bolts.
Oh, and the pins... $12 at the dealer!
Same here. Note that they are blackened stainless, though, with thread locker. Not worth the $5, but they should cost considerably more than an average screw. BTW, I couldn't find an equivalent, even online.
The plastic rivets are available from many bike vendors online, and in some auto parts stores. Be sure and measure, since they make a few different sizes. I forget what the Spyder ones are.
-Scotty
-
Just for future searches...
Originally Posted by daddydarko
Dealer charged me $5 per bolt! There are a few place online that have them for $.50 or less though. Just look for the M6x20 bolts.
Oh, and the pins... $12 at the dealer!
McMasterCarr.com
Delivers tomorrow
1
Zinc-Plated Alloy Steel Button Head Torx Screws
M6 x 1 mm Thread, 20 mm Long
92832A548
1
Pack of 50 each
$10.12
Pack
$10.12
2
Zinc-Plated Alloy Steel Button Head Torx Screws
M6 x 1 mm Thread, 12 mm Long
92832A540
1
Pack of 50 each
6.93
Pack
6.93
3
High-Strength Steel Nylon-Insert Locknut
Class 10, Zinc-Plated, M6 x 1 mm Thread
94645A205
1
Pack of 100 each
10.12
Pack
10.12
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|