-
2013 st sway bar
Anyone ever change there factory sway bar. Just seems that the front end dips down to easy. Any recommendations would be great. Thanks
-
-
The sway bar is probably the single best mod you can do on your Spyder.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Originally Posted by SpyderAnn01
The sway bar is probably the single best mod you can do on your Spyder.
No truer words have been spoken on this forum.
-
My Friend has a 2013 ST and I have 2012 RS SE5. We put the swaybars on the same day in his garage. Putting them on the ST is a big job, mainly because you have to get the front end of the ST so high off the ground. If you have the right equipment it would be better. We used a jack and cinder blocks and plywood, alternating each side until we got it high enough. It was pretty comical but we got the job done. He noticed a big difference on the ST after the install. The RS was pretty simple compared to that but we did not notice a drastic change for the RS.
-
SpyderLovers Sponsor
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Active Member
F3-S
Ron just wondering have you heard from Lamont or anyone else if they feel the need for a Baja Ron bar? Are you going to make one? Just wondering.
Originally Posted by BajaRon
It is a matter of degrees. The 2013/14 ST/RS/RSS models REALLY need a lot of Sway Bar help. So you will see a great deal of improvement there.
The 2008-2012 RS/RSS models need sway bar help too, but not as much. The difference is still significant, but not as dramatic as for other models that needed more help to start with.
The real eye opener is when you get accustomed to riding the improved sway bar and then ride a stock Spyder. That will get your attention!
Have Fun This Summer!
14 RT-S , Stock Large brake pedal White Pearl
-
SpyderLovers Sponsor
Originally Posted by NM Wrench
Ron just wondering have you heard from Lamont or anyone else if they feel the need for a Baja Ron bar? Are you going to make one? Just wondering.
I have not looked into the F3 yet. If a bar will help it, I will make one.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Originally Posted by spideybuffal0
Anyone ever change there factory sway bar. Just seems that the front end dips down to easy. Any recommendations would be great. Thanks
Make sure you buy the Baja Ron sway bar and not the one that BRP offers. You will notice a big difference in the corners.
Ron is a spyder lovers site sponsor. You can also buy his Sway bar through Value Accessories also a site sponsor just go to the home page scroll down and click on one of the Ads also don't forget to get the upgraded aluminum links.
-
Very Active Member
We put one on my wife's old 09 RS as well as her 13 STL. She said that she sees a big difference. It is not a hard job to do, you just have to get the font end high enough off the ground. If you are stuck and want to do the 5 hour drive to my place we can put it on together. I have all the tools needed. Although, your dealer should be able to put it on as well. If you don't get it done until the fall, make a trip to Spyderquest in September and you can get it done there.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|