-
Rear foot Peg extensions My design
Here is my design. Theses are Machined from 771 Aircraft Aluminum. Now I just need to get them powder coated.
These moves the rear peg Foward 4.5 inches, Down 2.5 inches, and out 2.5 inches.
-
SpyderLovers Founder
-
Registered Users
have you thought making some for resale?
-
RT-S PE#0194
pegs
I would like to buy as set if you made extra's?
vwatso
-
I also would like to buy a set if you are making any more for sale. They look great
-
Originally Posted by Lamonster
Those look great.
Thank you
Originally Posted by vwatso
I would like to buy as set if you made extra's?
vwatso
Yes, I have extras. I had to order ten sets, in order to get them machined
Originally Posted by gjco
have you thought making some for resale?
After I get them powder coated to match, I will be posting for resale
-
Originally Posted by nudle
I also would like to buy a set if you are making any more for sale. They look great
Thank you.
Yes I had more made, I just need to get them powder coated first.
-
REAR PEGS FOR THE SPYDER ?
Originally Posted by tjfischer
Here is my design. Theses are Machined from 771 Aircraft Aluminum. Now I just need to get them powder coated.
These moves the rear peg Foward 4.5 inches, Down 2.5 inches, and out 2.5 inches.
OK THESE LOOK GREAT ANY IDEA HOW MUCH ?
-
-
Active Member
I would be interested in a set also
-
-
Registered Users
Would u sell one pair in Slovenija? Let me know. Thank you wery much.
-
Active Member
Like the peg extensions!
Hey, I would be interested in buying a set as well. Post the $$ and how we can order them once you are ready to sell them. Thanks again - GO2LKG
GO2LKG in Richmond, VA
- 2014 RT Limited Cognac SE6 Mods: BRP backrest, WrapMySpyder graphics, saddle bag cargo nets
- TRADED 2011 RT-S Graphite Gray SM5 Mods: Personalized graphics, Zumo 550, ISIC foot boards, Spyder Pop heat mods, Utopia backrest, saddle bag cargo nets
- TRADED 2008 RS Silver SM5 Mods: Personalized graphics, BRP back rest w/sport luggage rack, Zumo 550, Highway pegs, CalSci windshield, BRP saddle bags, Corbin saddle seat
-
Originally Posted by go2lkg
Hey, I would be interested in buying a set as well. Post the $$ and how we can order them once you are ready to sell them. Thanks again - GO2LKG
Originally Posted by igor
Would u sell one pair in Slovenija? Let me know. Thank you wery much.
Originally Posted by Cundiffla
Those are awesome! My wife have been begging me to do something for her pegs but no one YET has them! If you want to help me get some brownie points I would Appreciate it GREATLY!
Also I went to a Can Am VIP Demo a couple of week back the Can Am Rep told my wife they are in the process of make the extension as well. Her eyes lit up! They kept having problem with the extension and the parking brakes, make the pegs too close to it.
So the sooner you do the better for me and the I'll owe you let us know when and how much.
Originally Posted by pzim
I would be interested in a set also
Thanks. I will repost when I get Picts after powder coating, with a price. I will also post on e-bay to make it easier for all.
Thanks again
-
Registered Users
PEG EXTENDERS
I WOULD LIKE A SET [WELL MY WIFE WOULD LIKE A SET], PLEASE LET ME KNOW THE $$$$$$$ THANKS
-
-
They look great. A shorter version for the front pegs would also be great, just to get our legs a bit lower and forward.
-
Originally Posted by Tonga
They look great. A shorter version for the front pegs would also be great, just to get our legs a bit lower and forward.
Hmmm, I hadn't thought about that. I think the foot brake and shifter would also have to me modified in order for that to work
-
The shifter can be adjusted up or down and think if the peg bracket only goes about 1 1/2 inch or 2 inch forward the the shifter would not be a problem. The brake is another thing and I would think some welding to make it longer would work. Anything to get my legs down and forward. The brake pedal might even still work, only need to lift foot up. Give it a try. You might try making them out of wood to just test my theory before spending money on aluminium.
-
Originally Posted by Tonga
The shifter can be adjusted up or down and think if the peg bracket only goes about 1 1/2 inch or 2 inch forward the the shifter would not be a problem. The brake is another thing and I would think some welding to make it longer would work. Anything to get my legs down and forward. The brake pedal might even still work, only need to lift foot up. Give it a try. You might try making them out of wood to just test my theory before spending money on aluminium.
I'll see if I can figure something out this weekend. Maybe I'll incorapte that Idea into the foot boards.
-
Back from being powder coated
I finally got them back from being powder coated here are some picts.
-
Mod Maniac
ata = allergic to asphalt
My mods: https://www.spyderlovers.com/forums/...ead.php?t=5753
.
There are two kinds of people: (1) those who can read, reason and apply the experiences of others; and (2) those who just have to pee on the electric fence. ataDude, 2009
My Spyder:
-
Very Helpful Member
Those look great.
-
Active Member
-
Active Member
Looks great!
Sent you an email.
Spyder Juice
Happy owner of 2014 White RTS - SE6
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|