-
Active Member
-
Very Active Member
As I see it..!!
you need to add fluid and the rubber gasket should not be collapsed at all. When it is the fluid is low and the gasket should keep what fluid is there close to the inlet.. As long as no air or moisture got in the system you should be fine but still may have to do some bleeding...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
-
Active Member
Be prepared to bleed the system, but hopefully not.
mtbear
-
Very Active Member
Also keep an eye on the fluid level after you refill
you may have a leak elsewhere
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
-
Very Active Member
Take out the gasket being careful not to get any brake fluid on your bike, put some fluid in the reservoir leaving room for the gasket, put the gasket back in and the top back on. Wipe the gasket
so it is clean. It should sit flat when put back in and the fluid should not be on top of it.122.jpg
Last edited by Highwayman2013; 09-08-2014 at 02:55 PM.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Active Member
Originally Posted by Highwayman2013
Take out the gasket being careful not to get any brake fluid on your bike, put some fluid in the reservoir leaving room for the gasket, put the gasket back in and the top back on. Wipe the gasket
so it is clean. It should sit flat when put back in and the fluid should not be on top of it. 122.jpg
Can someone point me towards a part number just for the gasket. The one that came off (that was pinched and never on right from day one). Is shot. I called three dealers and no one could help with that question. Still waiting to hear back from one. Grrrrr, someone help.
"THE DOG SLED"
2011 Spyder Can Am RTS SM5 (Orbital Blue)
Nuvi 550 GPS With Ram Mount
Drink 2 Go Cup Holder
KewlMetal RT Run-Turn-Brake LED
GloRyder Wolf Paw (in blue)
DMWMS Decal
IPS w/
Alaska Leather Sheepskin Butt Pad
TricLed - Brake Pedal
-
Active Member
Final Update!! Fixed, Problem Solved
The "cap set" part came in Saturday. Still no answer as to why mine originally had a thin paper gasket, (see pictures). No one at three dealers knew why. The BRP people do not know why either. Anyways, we bleed the line, (tiny black chunks and all) and an air bubble or two. We bleed the line until the fluid ran clear and no air bubbles. 100% fixed. Thanks to everyone who lead me in the right path. Thanks to Lamonster for the video on how to remove the side panels. Huge help. Now I'm off to a rally in PA Thursday to Sunday.
Originally Posted by TOPDOGJIM
"THE DOG SLED"
2011 Spyder Can Am RTS SM5 (Orbital Blue)
Nuvi 550 GPS With Ram Mount
Drink 2 Go Cup Holder
KewlMetal RT Run-Turn-Brake LED
GloRyder Wolf Paw (in blue)
DMWMS Decal
IPS w/
Alaska Leather Sheepskin Butt Pad
TricLed - Brake Pedal
-
Congratulations
You have officially Ben Burped. Was it good for you?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|