Results 1 to 15 of 15
  1. #1
    Very Active Member Hawk's Avatar
    Join Date
    May 2011
    Location
    Dacula, GA
    Posts
    841
    Spyder Garage
    0

    Default 2014 RT activating blinker stops cruise control

    Anyone seen this? On my way home from the Owner's Event, I would have it set on cruise control. I would change lanes and activate the blinker (left or right) and cruise would stop. So I would suddenly decelerate. It did it quite a few times over the 3 days back home but does not do it all the time. The only times it would cause me any concern (besides the aggravation) was when I passed someone and go to get in front of them in their lane and put my blinker on and it would do it, now I am suddenly slowing down in front of them. I usually have enough space that I was quickly able to twist the throttle and not cause them to have to slow down. Its more an aggravation than anything else. Anyone else?


  2. #2
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    That's a new one...
    Since they're not even housed in the same switch-pod; I'd have to just guess that the Canbus system is sending impulses to the wrong stuff at the wrong time!
    Document the events, and report it to your dealer A.S.A.P.!
    Please let us know what they find; Good Luck!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  3. #3
    Very Active Member Hawk's Avatar
    Join Date
    May 2011
    Location
    Dacula, GA
    Posts
    841
    Spyder Garage
    0

    Default

    Quote Originally Posted by Bob Denman View Post
    That's a new one...
    Since they're not even housed in the same switch-pod; I'd have to just guess that the Canbus system is sending impulses to the wrong stuff at the wrong time!
    Document the events, and report it to your dealer A.S.A.P.!
    Please let us know what they find; Good Luck!
    Yeah, its in the shop right now for a wobble in the tires when I brake, I forgot to mention it to them. I just called and added it on. I hardly use the cruise, most of my riding is local. But yeah, its puzzled me on why that was happening. They had not heard of it either.


  4. #4
    Very Active Member
    Join Date
    Sep 2010
    Location
    Clermont, Florida
    Posts
    2,600
    Spyder Garage
    0

    Default

    I know the nanny does not like the cruise control on when navigating curves such as exit ramps. I suspect a signal is being sent to cancel the cruise so the nanny is in more control over what it thinks is an upcoming curve or more dangerous event.. that thing has always been a tad to sensitive but i thought they had fixed that largely on the 2014

  5. #5
    Very Active Member Hawk's Avatar
    Join Date
    May 2011
    Location
    Dacula, GA
    Posts
    841
    Spyder Garage
    0

    Default

    Quote Originally Posted by BikerDoc View Post
    I know the nanny does not like the cruise control on when navigating curves such as exit ramps. I suspect a signal is being sent to cancel the cruise so the nanny is in more control over what it thinks is an upcoming curve or more dangerous event.. that thing has always been a tad to sensitive but i thought they had fixed that largely on the 2014
    This was going on a straight highway, just changing lanes. Who knows.


  6. #6
    Very Active Member
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default Yikes..!!

    good reason for concern..the system should be set up to recognize that at 65 mph your not making a 90* right turn. Be interesting to see if they can find out why it is doing this. Otherwise they need a warning lable.."When using cruise control on freeway use hand signals for lane changes"...
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  7. #7
    Invalid Emails
    Join Date
    Aug 2010
    Location
    ohio
    Posts
    62
    Spyder Garage
    0

    Default

    My cruise hasn't worked yet. Dealer ordered a new switch assembly. 6000 miles so far on the 2014. Still Waiting.....When they work, do they work good? I had trouble with my 2010 not wanting to climb hills or slow down as it ran down the other side. As long as it was flat it was ok.
    Last edited by gonker; 07-25-2014 at 06:10 PM.

  8. #8
    Very Active Member ulflyer's Avatar
    Join Date
    Jun 2011
    Location
    Near Lexington, NC
    Posts
    2,219
    Spyder Garage
    0

    Default

    Quote Originally Posted by Doc - Riverside View Post
    This should NEVER happen. I use cruise all the time. Only time cruise kicks out is hitting the brake or down shift.

    Same with mine. However, if even the side of my foot resting on the floorboard, taps the brake, ever so lightly, sideways, it will trip the cruise. Could it be, Hawk, that you are letting your foot touch yours? I've got so used to this that I seldom pick my foot up to cancel the cruise.
    Two Wheelers from 1963-2011

    Three Wheelers:
    2011 RT(Red)
    2014 RT(white)
    2016 F3T(red)
    2022 RT current ride(silver)
    __________________
    2016 Slingshot
    2018 Vanderhall
    2019 Slingshot

  9. #9
    Very Active Member Hawk's Avatar
    Join Date
    May 2011
    Location
    Dacula, GA
    Posts
    841
    Spyder Garage
    0

    Default

    Nope. Feet were on highway pegs. Its in shop now for tires and they have yet to replicate it. Guess I am going to have to try to go pro it in action.


  10. #10
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,457
    Spyder Garage
    0

    Default THEY SURE DOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

    Quote Originally Posted by gonker View Post
    My cruise hasn't worked yet. Dealer ordered a new switch assembly. 6000 miles so far on the 2014. Still Waiting.....When they work, do they work good? I had trouble with my 2010 not wanting to climb hills or slow down as it ran down the other side. As long as it was flat it was ok.
    I'M AN OLD f*RT , so I've had lots of veh's ..............the 2014 RT cruise control is the best I've ever used ......., Mikeguyver

  11. #11
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    Quote Originally Posted by Doc - Riverside View Post
    This should NEVER happen. I use cruise all the time. Only time cruise kicks out is hitting the brake or down shift.
    I'm a "creeper", so I use the cruise control ANY time I hit a four-lane. Other than a switch that's a bit fussy about how it gets pushed; mine has worked flawlessly.
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  12. #12
    Very Active Member
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    Are you positive you didn't down shift to get more power as you passed? That will definitely disengage the cruise.
    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  13. #13
    Very Active Member Hawk's Avatar
    Join Date
    May 2011
    Location
    Dacula, GA
    Posts
    841
    Spyder Garage
    0

    Default

    Quote Originally Posted by SpyderAnn01 View Post
    Are you positive you didn't down shift to get more power as you passed? That will definitely disengage the cruise.
    Yep. 100% sure.


  14. #14
    Very Active Member
    Join Date
    Jan 2014
    Location
    Coolidge Arizona
    Posts
    1,393
    Spyder Garage
    0

    Default

    Have you added any aftermarket light
    sounds like you could have a crossover between signals and brake lights

  15. #15
    Very Active Member Hawk's Avatar
    Join Date
    May 2011
    Location
    Dacula, GA
    Posts
    841
    Spyder Garage
    0

    Default

    Quote Originally Posted by garb55 View Post
    Have you added any aftermarket light
    sounds like you could have a crossover between signals and brake lights
    Nope. Only thing I added electrical is a horn and two outlets for heated gear run directly from the battery.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •