2013 RT heat

[mastertek2000]

well i decided to remove the wind deflectors under the mirrors i noticed my legs where getting hot when we road i believe it was caused by no wind on my legs from the wind deflectors we road 375 miles yesterday it was about 78-80 a lot cooler now i also noticed that the bike temp gauge runs on 4 bars instead of 5 it does go up to 5 in traffic but with the wind deflectors it always ran at 5 bars in traffic or highway

[oldguyinTX]

I have thought abut removing them as well. Keep us posted as to whether or not this works long term.

[Larry rt]

I installed the BRP adjustable ones on mine, works great! No severe heat issues, just got back from California , 107 deg gauge did not go above 3 o'clock . 22,000 miles and love my 2013 ltd ltd !

[Chupaca]

does seem the air flow towards the legs would also help draw out the heat from the engine. Things for those with fixed deflectors to consider on hot summer days...thanks..!!

[stewartj239]

does seem the air flow towards the legs would also help draw out the heat from the engine.

Exactly. That is why I went with the adjustable ones. The stock ones divert the around you AND from the upper vent. I keep the adjustable ones in the middle position which allows the air to come straight over the vents.

[mastertek2000]

does any one have a picture of the factory adjustable ones on their bike ????

[SpyderAnn01]

does any one have a picture of the factory adjustable ones on their bike ????

They look almost exactly like the stock ones except that these push open.

[finless]

I will take a picture of mine tommorrow .

Bob

[mastertek2000]

yes but are the clear all i find is chrome one thanks finless

[Larry rt]

You can order clear or chrome !

[mastertek2000]

thanks Larry don't know why they don't list that maybe i just over looked it

[SPYD1]

http://store.spyder.brp.com/product/...ind_Deflectors


This may help...

[mclaw44]

I installed the BRP adjustable ones here too. I really like being able to move the air where i need it. Here in Ohio we can have cool morings and nights so being able to pull heat in when wanted or out when not wanted is a GREAT plus. To me this is a must do mod. should have been like from the start of manufacturing IMO! Also I just added Baker Built Air Wings at Spyder feast which make even better! This is another mod to direct wind where it needs to be.

[mastertek2000]

just ordered mine

[stewartj239]

does any one have a picture of the factory adjustable ones on their bike ????

Here are a few shots of the BRP chrome adjustable deflectors. I keep mine in the middle position that lets the wind come straight over the vents.

Deflector - Side.jpg Deflector - RF.jpg Deflector - Front.jpg

[mastertek2000]

thanks stew

[mastertek2000]

ok so to get more air flow to i and the wife i just ordered baker wings that should do it

[Geosik]

My better half had the Baker Air Wing installed at Americade and she says it is better. I don't know since she hasn't let me drive it.

ok so to get more air flow to i and the wife i just ordered baker wings that should do it

[Bob Denman]

I usually keep mine in the center position as well A Sunny Day 006.jpg
Unless it's going to be warm enough to warrant using them as scoops to draw more air in to me!

[DJFaninTN]

ok so to get more air flow to i and the wife i just ordered baker wings that should do it

money well spent!

[jaherbst]

Here are a few shots of the BRP chrome adjustable deflectors. I keep mine in the middle position that lets the wind come straight over the vents.

Deflector - Side.jpg Deflector - RF.jpg Deflector - Front.jpg

Mine do not seem to pull in any more air than without the OEMs removed. Either way I only increase air over my knees and no higher. Just can't get crazy over the looks of the Bakers but they probably would work much better. IMHO the factory adjustables are a waste of money in any position.

Jack

[stewartj239]

Mine do not seem to pull in any more air than without the OEMs removed. Either way I only increase air over my knees and no higher. Just can't get crazy over the looks of the Bakers but they probably would work much better. IMHO the factory adjustables are a waste of money in any position.

Jack

Last year, I removed the OEM deflectors for the added air flow which is probably equivalent to the adjustables installed, but I did not like the looks of them removed. If you shop around, you can find many of the BRP accessories under retail.