|
-
Active Member
 Garmin GPS Question
Has anyone had an issue with there Garmin Zumo GPS where you can not select a state?
Open up your Mind and let your Fantasies Unwind!
-
RT-S PE#0412
No, have not had that happen. You can call Garmin toll free and a tech can walk you through it.
have serial # handy.
-
Registered Users
 Originally Posted by mclaw44
Has anyone had an issue with there Garmin Zumo GPS where you can not select a state?
Never had that happen on any of my Garmins
2016 F3 Limited Triple Black
-
Banged Up Member
Mine loses sound all the time AND goes blank.
Chris
-
Originally Posted by mclaw44
Has anyone had an issue with there Garmin Zumo GPS where you can not select a state?
Yes, if you select a state that is not programmed into your maps. My Zumo 550 is an older unit and does not have enough storage space to load the entire US into the unit. Instead I selected the lower 49 states SE region, which leaves a large portion of the US out. You can add an SD card to load other states. I don't know if you have all 50 loaded, but this is what happens with mine.
2013 RTS SE5
2013 Kawasaki Vulcan Nomad 1700
-
Mine normally operates in a State of Confusion... 
-
Originally Posted by Rattigan_Roger
I have a Zumo 550 and have not had the problem but I don’t think it is the friendliest interface around.
My 660 works fine. Like Roger says, I don't think it's the friendliest interface, but my buddy has the BMW equivalent of it and he's got it down to the point that he can even select his routes, so it must be me. I'm not "Patient" with things like that
-
Very Active Member
Originally Posted by Huddleston
Yes, if you select a state that is not programmed into your maps. My Zumo 550 is an older unit and does not have enough storage space to load the entire US into the unit. Instead I selected the lower 49 states SE region, which leaves a large portion of the US out. You can add an SD card to load other states. I don't know if you have all 50 loaded, but this is what happens with mine.
I have the same happen. Requiring the Canadian Maps. I normally load Canada and Border states. When I take a ride down to LA or MO the states are not there. You can load them ALL onto your Basecamp (or Mapsource) and then when you transfer routes to the garmin make sure that you check the box that says "Maps". Make sure that you highlight all of the maps that you want on your Garmin while you are in Basecamp or Mapsource.
-
Very Active Member
I have a Garmin 50 Nuvi , and no problems with entering name of States. Deanna777
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
-
Banged Up Member
Originally Posted by Bob Denman
With that new avatar are we talking confusion or confuscious???? <smiles>
Chris
-
Registered Users
2014 Spyder RT-LTD Cognac with Matching trailer - Wife's
2014 Red Indian Chieftain - Mine
2013 Yamaha FJR - Mine
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
