14 RT owners, you owe it to yourself and your Spyder to get SPYDERPOPS new KOTT (Keep Out The Trash) grilles. They did their job on my 1100+ ryde home from Spyderfest.
2016 F3-L Special Series? Mods: Lamonster IPS end caps w/ Gripper 3rd pegs, GPS mount, Power Plate, Perf. Muffler; Backoff Brake Light Strobe; CD Front (amber/red) Brightsides & Tip Kit; ISCI Flag Holder w/Long Poles; BRP Signature Light, Aux Lights, Saddlebag Liners, Garmin 590 GPS; TricLED foam Grips, LEDs (Aux/headlights); Pitbull Driving Lights; RDL seat; Ultimate backrest
Previous ryde: 2012 RT-L, 26,636 miles on it when traded; 2014 RT-L, 34,147 miles on it when traded
Is this used in addition to the ones mine came with. What's the difference
These sit forward of the ones already on the stock RT. The OEM ones are so far back that anything that goes in will just stay there. With the KOTTs, the trash will go against them and then sweep out to the side.
I was able to get Harvey to sell me a pair to bring home and install later. He doesn't have them on his web-site yet, because they haven't written installation instructions. So I'm awaiting instructions and then I'll get them on my '14.
These sit forward of the ones already on the stock RT. The OEM ones are so far back that anything that goes in will just stay there. With the KOTTs, the trash will go against them and then sweep out to the side.
I was able to get Harvey to sell me a pair to bring home and install later. He doesn't have them on his web-site yet, because they haven't written installation instructions. So I'm awaiting instructions and then I'll get them on my '14.
Too new. That explains it. I jumped over to their page before scrolling through all the posts. Looks like a good piece to add. Can't wait to see pricing and installation info.
Too new. That explains it. I jumped over to their page before scrolling through all the posts. Looks like a good piece to add. Can't wait to see pricing and installation info.
I have them on my 2014 RT-S they are pretty simple to install, 4 plastic blocks on each side with Double sided tape, put the grills in, and two screws into the side blocks and, TA-DA you are done, they really keep the trash out.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
I was hoping that I had a picture of my 2014 stuffed full of tumbleweed but I couldn't find one. On my trip to NM in January both sides of the Spyder were packed full of them and if you have ever touched tumbleweed you will know that they are prickly. I had Spyderpops install the KOTT during Spyderfest and I made it home tumbleweed free!
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
Pops only had bright stainless at Spyderfest. I may take some black hug temp paint to mine.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
My eyeballs aren't quite co-operating tonight after 8 hours in school...
Are they finished in Black, or in bright stainless?
Aren't you a little old to go back to school
or is it traffic school
Don
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
Pops only had bright stainless at Spyderfest. I may take some black hug temp paint to mine.
Plasti-Dip works really well on them.
May all your encounters with the law begin with the words: "nice trike!".[/B] 2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
These sit forward of the ones already on the stock RT. The OEM ones are so far back that anything that goes in will just stay there. With the KOTTs, the trash will go against them and then sweep out to the side.
I was able to get Harvey to sell me a pair to bring home and install later. He doesn't have them on his web-site yet, because they haven't written installation instructions. So I'm awaiting instructions and then I'll get them on my '14.
The KOTT GRILLES are now online along with the instructions under the instructions tab.
Thanks,
Harvey
Yes, the new KOTT Stainless Steel Grilles are added in front of the stock grilles with a different angle to Keep out the Trash.
As demonstrated by it's designer and builder himself during Spyderfest!IMG_3133.jpg
May all your encounters with the law begin with the words: "nice trike!".[/B] 2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
SPYDERPOPS KOTT Griles
Reply With Quote
Originally Posted by sddinnh
Professional Continuing Education requirements... 
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned: 
