-
Half way there!
Well.. we got the right side of the 2014 panels on FB's bike.... the left side parts came unsanded. and with out the clear coat.... pretty rough.... still working to get that fixed...
Right side looks good... I don't know that BRP will get us the left side parts in time for us to make it to Spyderfest with all the right.. or left parts on .. so we will be coming the BRP way... half assed fixed...
So if ya see a white 2013 ST with half 13 panels, and half 14 panels... that would be FB.. on her half assed bike....Ya think there may be a problem with QC?????
Last edited by hotglue; 04-21-2014 at 08:35 PM.
-
Very Active Member
-
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
This is one of those show up any way you want to events. Just Show up.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Originally Posted by SNOOPY
I take it there is no white 2014?
Are you taking any pics??
.
The colors are a good match... but the left front panel came unsanded and un clear coated... piss poor quality control... why would they send a part out un finished...... oh wait... this is for a 2013 .. they never really finished this bike before they sent it out...shame on me....
-
Very Active Member
-
Very Active Member
-
That is pretty much why we are going to spyderfest halfassed fixed.the morph spyder..... they need to send us the right parts.. and pay to ship the wrong ones back....
-
-
Originally Posted by Chupaca
But you will be there..some of us can't make it even with a fully painted top of the line wonder machine... As missmatched as it may be when you get there have fun for us all.. Be safe..!!
We will have FUN there... TOO many GREAT people to not have a GREAT time!!!!! Wish ya could make it!!!!!
-
-
GOS member (Girls On Spyders)
Flamingo Babe
As long as she shows up and brings the Champagne!!!
-
We will be there... with bells on.... with half the spyder finished.... be a good chance to see the difference between the 2013 and 2014 panels.. 1/2 and 1/2....
-
Very Active Member
I can't seem to find the pics here, let me look again....
-
Very Active Member
Char's Spyder is starting to sound like that Caddy Johnny Cash used to sing about!!
-
-
Very Active Member
Why not go with the unsanded panels on the left side to SF? At least the cooling will be there for both sides and you can switch out the panels when you get back. Since you already have them, why not use them?
2020 F3 Ltd
Spyderpops Bumpskid
Spyderpops Brake/Run/Turn Signal LED's
Lamonster Garage LED Fog Lights and Headlights
2013 ST-S retired 1/9/16 at 25,061 miles
2015 F3S sold at 77,565 miles.
-
Very Active Member
Originally Posted by JKMSPYDER
Why not go with the unsanded panels on the left side to SF? At least the cooling will be there for both sides and you can switch out the panels when you get back. Since you already have them, why not use them?
Probably doesn't want want to get backhanded.
-
Yeah.. if I put the unfinished parts on.. BRP could say they were used and not send us the right parts without more money on our part.... don't wanna go there... but it is kinda cool to see the difference between the 2 sides....
-
Very Active Member
-
Prom picture?
-
RT-S PE#0412
-
Very Active Member
So in your install, where do the panel nuts on the list supplied go?
If they go on the new panels you would need new bolts because the 2013 bolts are bigger?
I see that the original bolts and nuts can be swapped over, but can't see why we ordered the 25000079 panel nuts because they are smaller?
-
Dawg,
Where have you been hiding; the internet traffic from Virginia Beach was down over 83%...
-
Very Active Member
Originally Posted by Bob Denman
Dawg,
Where have you been hiding; the internet traffic from Virginia Beach was down over 83%...
Obviously people don't care for my posting so I'm just sharing 10% .....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|