-
Active Member
spyderpops missing belt guard
Has anybody installed the spyderpops missing belt guard on the rs or rss yet
richie spyder
-
Registered Users
Belt guard
Originally Posted by ssmcclub
Has anybody installed the spyderpops missing belt guard on the rs or rss yet
Spyderpops Harvey just installed one on my 2014 RT. He's the man to answer any install questions on any models. Don't know if that helps.
Ron
-
Active Member
ok thank you
richie spyder
-
Registered Users
Originally Posted by ssmcclub
Has anybody installed the spyderpops missing belt guard on the rs or rss yet
I did mine today. Hardest part was taking the screws off. Was happy I did not have to put the nuts back.
If you ryde like there's no tomorrow, there won't be any
Accidents hurt - safety doesn't
-
Very Active Member
I have one on my 2011 RS-S it looks like it's working.
Mike
-
Registered Users
I just fitted one yesterday , like Topshotta said , the hardest part was getting the screws out of the lower belt guard , the nuts on the back were totally rusted solid , had to drill them out .
After that it was fairly easy .
i decided to remove the whole side , bit rusty , the 4 rear fender nuts and bolts were also fused together with rust , back out with the drill .
All nuts and bolts in the area are now stainless .
-
Very Active Member
One of his first products. Many of them installed on all models. Installed 3 just this weekend. A little harder on the RS/ST because of the fender support, but an 15-20 minute install process.
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|