Was able to bend the bypass from one piece of 2”,sure makes a big difference
in and sound and performance.
Handbrake works well from a design I used once before, not really wild about
the master cylinder but hard to find a 22 mm or larger bore brake master cylinder.
Was able to bend the bypass from one piece of 2”,sure makes a big difference
in and sound and performance.
Handbrake works well from a design I used once before, not really wild about
the master cylinder but hard to find a 22 mm or larger bore brake master cylinder.
Nexus
Do have any plans on making some to sell? I'd be interested.
How is the sound? Slightly louder, much louder?
Secondly, how the heck did you get to the spring on top to remove/replace? If they are anything like the ones Rotax use
on their ultralight motors, they are one strong spring. I used to
use loktight pliers to get a grip on them, but obviously that won't work on that top spring due to limited space.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
Do have any plans on making some to sell? I'd be interested.
How is the sound? Slightly louder, much louder?
Secondly, how the heck did you get to the spring on top to remove/replace? If they are anything like the ones Rotax use
on their ultralight motors, they are one strong spring. I used to
use loktight pliers to get a grip on them, but obviously that won't work on that top spring due to limited space.
As far as sound its deeper( lower tone) I really don't know what to compare it to
but not loud. I had dual exhaust and Supertrapp mufflers on the last two Spyders
but I promise the wife I would not do that to this one as she could not stand the
noise.
As far as selling the bypass I'm not in that business Lamont make some good quality
Spyder's accessories and this is his livelihood, and this is just a hobby for me. I waiting
on his new highway pegs now.
As far as the Springs you're absolutely right on that one the hardest part of this whole bypass
was that one spring that hard to get too. I have a Band-Aid on my right thumb right now
because of it. I did use a long needle nose Loktight pliers one advantage I did have I was
standing up doing it.