-
Custom Dynamics 4.5" Risers
Has Anyone out there installed the 4.5" Easy Risers by Custom Dynamics? I can't see how they can possibly have enough slack in the electrical cables.... Am I missing something, or should I send them back for a refund? The clutch cable and throttle cables seem to be long enough but not the harnesses for the controls, including the reverse cable, on my 2009 GS SM5...
Sent from my iPad using Tapatalk HD
-
Registered Users
AFAIK you have to cut some tie wraps to get enough length.
2013 Pure Magnesium Spyder RS-SM5 Cal Sci medium clear windshield, R-35 hard sided saddlebags and fitments rack, 2013 Can-Am Spyder ST Limited Embroidered Stock Seat, Trunk opening spring, fire extinguisher, Passenger backrest and rack, Added side mirrors, Handlebar bag.
-
Motorbike Professor
There are several ties as the cables run down the steering and to the engine. Some cables may even have to be rerouted.
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
Very Active Member
You have to cut the cable ties and pull up the cables to get enough slack, but it is there. I installed them and they work great!
2015 RT White,Tj's Dash mount,Rivco's Duel Flag Holder,SealsFloorBoards(Pups),Custom Dynamics fender lights(R/W)Bajaron's Swaybar & links,Lamonster's LED headlights,lidlox.Wiredux A-arm driving lights(upper&lower)FOBO TPMS system,Spyerpops lighted bumpskid,Foom handgrips. tobor9@me.com
-
Very Active Member
Yep, cut ties and see about rerouting the cables ( over or under a big frame piece in the front ) I installed a 7" riser on my old 2008 GS and it fit. supposed to be a ty-wrap in the front on the frame that will get you some slack. move the cables and feel where they are being held by a ty-wrap.
2014 RT Limited Cognac ----- Wraps, skid plate, lights, Elkas
2002 harley ultra classic
2008 hayabusa
-
SpyderLovers Sponsor
There is Plenty of slack
You will have no trouble I have the Heli Bar risers on top of the BRP 1in. riser
and had no trouble just cut and reposition the tie straps...
Ride on and Ride safe
Dave
Originally Posted by Dkerr
Has Anyone out there installed the 4.5" Easy Risers by Custom Dynamics? I can't see how they can possibly have enough slack in the electrical cables.... Am I missing something, or should I send them back for a refund? The clutch cable and throttle cables seem to be long enough but not the harnesses for the controls, including the reverse cable, on my 2009 GS SM5...
Sent from my iPad using Tapatalk HD
-
Active Member
Agreed. I have 4 inch riser plus BRP 1 inch riser and have no problems
2014 Silver Platinum ST Limited: Mods so far: fog lights, passenger backrest, ultimate seat w/driver backrest, rivco drink holder bracket with ram x-grip cell phone holder
-
Very Active Member
You have to make sure that you do not have the BRP 1" riser installed or else the 4.5" riser WILL NOT WORK. I bought one and tried every which way to install it on my wife's GS and then I found out that she had the 1" riser on the bike already. I mocked them up to see if she would like them and she didn't so I sold them and made my own 2" riser on top of the BRP 1" riser.
-
SpyderLovers Sponsor
Oh YES they will work
Again I have the 4 & 1/2 in. Heli Bar risers
on top of the 1 in BRP riser total 5 & 1/2 in
There is plenty of cable and wires for it.
Check the pictures here of mine.
I love it
Dave
Originally Posted by bscrive
You have to make sure that you do not have the BRP 1" riser installed or else the 4.5" riser WILL NOT WORK. I bought one and tried every which way to install it on my wife's GS and then I found out that she had the 1" riser on the bike already. I mocked them up to see if she would like them and she didn't so I sold them and made my own 2" riser on top of the BRP 1" riser.
-
OK... I discovered that I have the factory 1" riser, and I could not make the risers work, due to the electrical harness. I bought the Custom Dynamics 3" risers, and they were a piece of cake to install. I love them, gives me a much more comfortable riding position.
I now have a set of Custom Dynamics 4.5" risers for sale if anyone's interested? I would let them go for $125... You can call me at 760-887-6010.
Sent from my iPad using Tapatalk HD
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|