-
07-16-2014, 07:00 PM
#576
Very Active Member
-
07-16-2014, 07:53 PM
#577
Active Member
Haven't been on the site in a while and started reading through this thread again. I have a 13STS in the magnesium color. I haven't changed my panels yet, because I was hoping for my color to become available and/or "kits" to become available making it idiot proof to order. Does anyone know if either one of these things have happened? Thanks
-
07-16-2014, 08:41 PM
#578
Very Active Member
Originally Posted by golfsferr
Haven't been on the site in a while and started reading through this thread again. I have a 13STS in the magnesium color. I haven't changed my panels yet, because I was hoping for my color to become available and/or "kits" to become available making it idiot proof to order. Does anyone know if either one of these things have happened? Thanks
Arctic's link shows Magnesium available ....
http://www.spyderlovers.com/forums/showthread.php?58351-New-Side-panels&p=842720&viewfull=1#post842720
-
07-16-2014, 09:10 PM
#579
Active Member
Originally Posted by SNOOPY
Thats encouraging, but what company is responsible for that Kit chart? How does someone place the order? Thanks Snoopy!
-
07-16-2014, 10:41 PM
#580
Very Active Member
2017 Chevrolet Camaro SS convertible. 2017 GMC Sierra cc diesel. 2017 Arctic cat RR 137 ES
-
07-17-2014, 05:08 AM
#581
Very Active Member
Originally Posted by golfsferr
Thats encouraging, but what company is responsible for that Kit chart? How does someone place the order? Thanks Snoopy!
Call and ask http://www.powersportswarehouse.com/pages/ContactUs
Magnesium parts are # 219800341 & 219800342
Couldn't find it on their site yet.
Any Can Am dealer would have them also, but I think at a higher cost.
-
07-17-2014, 05:09 AM
#582
Very Active Member
-
07-17-2014, 04:17 PM
#583
Active Member
Originally Posted by SNOOPY
Yea I tried power sports before I reposted and saw nothing so I tried to contact them but haven't heard back.
-
07-29-2014, 06:33 PM
#584
Active Member
Ordered panel!
Title should say, Ordered panels! Not panel!
Thanks to the "Kit" parts numbers that Lamont posted. I finally ordered my panels today for my 2013 STS magnesium Spyder from my dealer. I was thrilled that I could order in the color I needed and I was pleasantly surprised with price, $637 including tax. Should be here by late week.
-
07-29-2014, 09:57 PM
#585
Very Active Member
Does sound like a good price, I was quoted well over a $1000 back when I started this journey....
-
07-30-2014, 01:47 PM
#586
Active Member
New panels
Interesting, it seems everyone is getting different prices on these kits, my local dealer quoted $333.99 per kit with tax included, so $667.98 for both and that's BRP's retail price, not what the dealer pays for them, I know I'll get a discount of 15% so I'll at least get $100 off, they should be in this week.
Jeff M.
2017 F3-Limited
-
07-30-2014, 02:49 PM
#587
Active Member
Originally Posted by SNOOPY
Does sound like a good price, I was quoted well over a $1000 back when I started this journey....
Yea so did I! I just kept hoping they'd offer them in my color and offer a kit. Thank God it happened with a price break.
-
08-18-2014, 07:06 AM
#588
Active Member
What is the result of this mod???
Elegant solution, simple and inexpensive.
What is the result?
Is there a noticeable difference in the heat level under the panels?
Up here in Michigan, the heat is not so much of an issue, at least summer 2014, cooler than normal.
Still getting stuck in the city traffic is no fun, your brainstorm looks like the correct solution for me.
-
08-18-2014, 10:58 AM
#589
...in the pink (Girls On Spyders)
Originally Posted by spyderfish
Elegant solution, simple and inexpensive.
What is the result?
Is there a noticeable difference in the heat level under the panels?
Up here in Michigan, the heat is not so much of an issue, at least summer 2014, cooler than normal.
Still getting stuck in the city traffic is no fun, your brainstorm looks like the correct solution for me.
there will be no heat with the new air flow panels.....I have put 10k on my ST since installing new panels...no heat....bike ran flawless...this is where the bike should had been the day I purchased it.....and not a year and a half later...but I'm happy happy happy....order your panels thru your dealers
#IamARyder #RideASpyder #CanAmSpyder
-
08-22-2014, 09:07 PM
#590
Active Member
Originally Posted by flamingobabe
there will be no heat with the new air flow panels.....I have put 10k on my ST since installing new panels...no heat....bike ran flawless...this is where the bike should had been the day I purchased it.....and not a year and a half later...but I'm happy happy happy....order your panels thru your dealers
I wish I could agree but while the heat levels on the two replaced panels has changed, there seems to be considerable heat still at the forward edge of the panel not replaced on the side at the lower left calf just above the ankle.
-
08-22-2014, 11:14 PM
#591
Active Member
Originally Posted by golfsferr
I wish I could agree but while the heat levels on the two replaced panels has changed, there seems to be considerable heat still at the forward edge of the panel not replaced on the side at the lower left calf just above the ankle.
Me too but I just partially closed the hole it was coming from with black duct tape - tried all the way but panels started heating up again so opened it up some. I also wear half chaps. Love my new panels.
-
08-23-2014, 06:29 PM
#592
...in the pink (Girls On Spyders)
Originally Posted by golfsferr
I wish I could agree but while the heat levels on the two replaced panels has changed, there seems to be considerable heat still at the forward edge of the panel not replaced on the side at the lower left calf just above the ankle.
I have noticed some heat on the right side during stop and go or very slow traffic .....but I always wear high top leather boots ...so that helps some......plus my legs are really short and I probably sit closer up than most....my seat has been moved forward 2 inches....maybe that is the difference.....you know the new panels have improved the heat 90%....for me
#IamARyder #RideASpyder #CanAmSpyder
-
08-23-2014, 11:12 PM
#593
Active Member
Originally Posted by flamingobabe
I have noticed some heat on the right side during stop and go or very slow traffic .....but I always wear high top leather boots ...so that helps some......plus my legs are really short and I probably sit closer up than most....my seat has been moved forward 2 inches....maybe that is the difference.....you know the new panels have improved the heat 90%....for me
Don't get me wrong, there is a difference on the highway, it's just the start stop stuff that still bugs me. But with all the good folks here I'm sure I'll find some good solutions to help control the remaining heat. JT's air filter maybe, some holes cut out underneath to help let the hot air escape, etc. not sure I'm ready to remove the cat. I do love the new panels though, especially since BRP covered the expense and they look cool!
-
08-24-2014, 07:10 AM
#594
Very Active Member
I haven't removed the cat yet and mine is pretty decent in light traffic/stop and go.
My only real heat is if I try to use my foot on the right side peg while moving slow, direct blow off of the radiator.
-
08-24-2014, 11:39 AM
#595
Very Active Member
Panels
I was having zero success communicating via email with BRP care on a couple of issues.
Contacted a great dealer and have the issues resolved.
One of them being the new 2014 panels for our 2013 ST provided by BRP.
The great dealer? A spyderlovers site sponsor...
Sponsor of SpyderPaloosa (Do you have your raffle tickets... proceeds to benefit a wounded warrior with a track chair?
Thanks so much!!
2015 Intense Red Pearl RTS SE6 - Laser Alignment by Precisyon Trac, Tri-Axis handle bars, ? to be determined.
2014 XLR Viper 305V14 Toyhauler (Home)
2015 Ram 3500HD Crew Cab
Former Spyders
2010 Blue RT A&C SE5 53K plus miles - never left us stranded!
2013 Pure Magnesium Metallic ST SE5 11K plus miles - never left us stranded!
-
08-24-2014, 01:55 PM
#596
...in the pink (Girls On Spyders)
Originally Posted by golfsferr
Don't get me wrong, there is a difference on the highway, it's just the start stop stuff that still bugs me. But with all the good folks here I'm sure I'll find some good solutions to help control the remaining heat. JT's air filter maybe, some holes cut out underneath to help let the hot air escape, etc. not sure I'm ready to remove the cat. I do love the new panels though, especially since BRP covered the expense and they look cool!
my whole bottom panels off...still have slow moving heat right foot...we have a cat,,,but Mark is waiting to see what BRP and NHTSA do.....Mark likes the change I air filter...a couple different set ups.....we are waiting....
#IamARyder #RideASpyder #CanAmSpyder
-
08-27-2014, 12:09 PM
#597
Registered Users
Originally Posted by spyderbirds
I was having zero success communicating via email with BRP care on a couple of issues.
Contacted a great dealer and have the issues resolved.
One of them being the new 2014 panels for our 2013 ST provided by BRP.
The great dealer? A spyderlovers site sponsor...
Sponsor of SpyderPaloosa (Do you have your raffle tickets... proceeds to benefit a wounded warrior with a track chair?
Thanks so much!!
I had 0 success trying to deal with BRP but going to the great dealer I have here in Toronto and having them deal with BRP got me my new 2014 panels on order, just waiting now and seeing how much of an improvement it will be. I am also thinking about taking the 2 lower plastic panels off if necessary also.
-
08-28-2014, 10:05 AM
#598
I finally received the new panels from my dealer and I installed them. They look great! Is it normal procedure for the dealer to keep the old ones? I questioned him and he said it's an exchange. How did it work out for you guys?
2013 SPYDER STS
Two Brothers Cabon Fiber Slip-on
Pit Bulls Powersports Cat bypass
Juicebox fuel mtg and Kewlmetal Air Filter
Custom Dynamics LED Brightsides red & amber kit
Custom Dynamics Sreet Magic Brake Light Strobe/Flasher
Ram Mount Ball on center handlebars
BRP Integrated Audio System & JBL Speakers
BajaRon Swaybar & Fox Podium Shocks
BRP HID Fog/Headlights
Seat cowl painted circuit yellow
Ultra Touring Windshield
Who knows what's next.....
-
08-28-2014, 11:57 AM
#599
My new panels were installed this week by my dealer. They kept the old ones. All covered under BRP warranty.
I'm a very happy spyder owner.
2013 ST-S
2002 BMW R1150RT
-
08-28-2014, 12:05 PM
#600
Active Member
Originally Posted by Speedy Spyder
I finally received the new panels from my dealer and I installed them. They look great! Is it normal procedure for the dealer to keep the old ones? I questioned him and he said it's an exchange. How did it work out for you guys?
Yes, dealer kept my old panels
Jeff M.
2017 F3-Limited
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|