-
Very Active Member
Road Position Saved My Life Today.
Whew! There are lots of reasons to establish an outside-inside-outside line in turns, and to brake before the turn, roll on the throttle through the turn....doing this increases turning radius, allows more visibility around the turn, more separation from oncomming traffic, and maximizes availabe traction.
Today it saved my life! Really.
I was driving in the mountains, taking a right curve, outside-inside-outside, starting to roll on the throttle. BIG TRUCK...TOO HOT IN THE TURN...OVER THE YELLOW LINE...HEADED FOR ME...relax, relax, swerve right, plenty of pavement, SWERVE NOW! Lifted right wheel. Nanny kicked in...did not collide with the truck. Whew.
Dan
2012 Viper Red Rt
upgrades:
Baja Ron's Anti-Sway
Diamond-R Arm Rests
Gloriders
High mount brake light
chrome front fender garnish
Bad Boy Horn
Chrome Deflector Rack
Chrome Scuff Nose Accent
Handlebar Grip Fringe
Gremlin Bells
-
Phew!! Time for fresh underwear!!
Well done Dan!
-
Very Active Member
Originally Posted by OJ UK
Phew!! Time for fresh underwear!!
Well done Dan!
-
Originally Posted by Dan_Ashley
Whew! There are lots of reasons to establish an outside-inside-outside line in turns, and to brake before the turn, roll on the throttle through the turn....doing this increases turning radius, allows more visibility around the turn, more separation from oncomming traffic, and maximizes availabe traction.
Today it saved my life! Really.
I was driving in the mountains, taking a right curve, outside-inside-outside, starting to roll on the throttle. BIG TRUCK...TOO HOT IN THE TURN...OVER THE YELLOW LINE...HEADED FOR ME...relax, relax, swerve right, plenty of pavement, SWERVE NOW! Lifted right wheel. Nanny kicked in...did not collide with the truck. Whew.
? How can u lift a right wheel in a righthand curve
-
Very Active Member
Righthand wheel is the inside wheel in a right curve, if something is gonna come up, that'll be it.
john
-
Very Active Member
-
Member
2008 GS , Brisk Spark Plug - BOR10LGS Blk/yelllow
-
Very Active Member
Gotta say..!!
nanny does not like flip overs and does a good job at avoiding them. My problem now is the mods I have done to the suspension upsets the nanny way to often. Wish they had put settings on the vss like tour and sport ryding... Glad you kept a cool head and pull out of it with only the scare..!!
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Registered Users
Glad you're OK! It's very important to learn these valuable techniques when riding. Good quick thinking!
2015 F3-S SE6, Pure Magnesium Metallic
12V Power Outlet
Battery Tender Pigtail
Blue Ridge Windshield
-
Very Active Member
Dan
2012 Viper Red Rt
upgrades:
Baja Ron's Anti-Sway
Diamond-R Arm Rests
Gloriders
High mount brake light
chrome front fender garnish
Bad Boy Horn
Chrome Deflector Rack
Chrome Scuff Nose Accent
Handlebar Grip Fringe
Gremlin Bells
-
Motorbike Professor
Three things actually saved your bacon...good riding technique, the VSS feature, and not riding at the edge of the envelope. I'm sure you know what I mean, but I will explain for those who don't. Riding at the performance limit of your machine or the limits of your skill, pushing physics to its limits, does not leave any margin to allow evasive maneuvers, even with a nanny. If you are at the adhesion limits of your tires, the most lateral force your machine can take without lifting a wheel or sliding out, or riding faster than the distance you can see and react, there is not going to be a happy ending in a situation like this. If you are on a race track or controlled course, and are familiar with it, by all means feel free to push the envelope, but if you are on a public road where you cannot control or are not aware of the conditions...opposing traffic, sand or gravel in the road, off camber turns, potholes, wet pavement, slow traffic ahead, etc., leave yourself a little wiggle room. Your survival may depend on it. JMHO
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
Registered Users
Originally Posted by NancysToy
Riding at the performance limit of your machine or the limits of your skill, pushing physics to its limits, does not leave any margin to allow evasive maneuvers, even with a nanny. If you are at the adhesion limits of your tires, the most lateral force your machine can take without lifting a wheel or sliding out, or riding faster than the distance you can see and react, there is not going to be a happy ending in a situation like this. If you are on a race track or controlled course, and are familiar with it, by all means feel free to push the envelope
Even on the track they teach us how to push it without reaching the limits for very long.
Braking a little more going into a turn, then late apexing a corner before rolling on the throttle puts you out of harms way that much longer, and minimizes the duration of time that you are near the end of your traction budget.
You only sacrifice a small amount of speed in the corner for a whole lot more options coming out of it which is where all the exciting things happen.
Plus it's a lot easier to brake hard and make a slower turn than it is to precisely judge how much to brake before turning into a mid-apex corner.
For those who practice outside-inside-outside, try aiming for inside past the midpoint of the turn and see what I mean. It makes for a no-fan-fare turn which is, by all right, boring... but 99% as quick around the corner and 500% safer.
Glad you came thru safely Dan
tHe SmOkEr YoU dRiNk ThE pLaYeR yOu GeT!
-
Registered Users
big phew....
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
-
Very Active Member
Originally Posted by OJ UK
Phew!! Time for fresh underwear!!
Well done Dan!
OH yeah
-
Thank you for putting yourself in the postion of being able to tell your story!
Ride smart; ride aware!
-
SpyderLovers Sponsor
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Very Active Member
I bet the pucker kept you from sliding on the seat as well.
-
Very Active Member
Dan
2012 Viper Red Rt
upgrades:
Baja Ron's Anti-Sway
Diamond-R Arm Rests
Gloriders
High mount brake light
chrome front fender garnish
Bad Boy Horn
Chrome Deflector Rack
Chrome Scuff Nose Accent
Handlebar Grip Fringe
Gremlin Bells
-
Registered Users
Originally Posted by OJ UK
Phew!! Time for fresh underwear!!
Well done Dan!
I'll bet there was a pucker factor of 932 on that one. Good job on avoiding the truck.
2013 RT-S se5, C/D HMT third tail light( r/b/t), Ram Cup holder, TRICLED front fender LED's (r/t), C/D Bright sides (r/t), Bajaron sway bar and metal heim links, TRICLED mirror turn signal LED's, ISCI tall dual flag holder, BackOff LED license plate frame, "Rufus" (stuffed 20" Bulldog) real one wants nothing to do with bike. Honel tri bag for dash, recordingguy25's (SL handle) custom mud flap ( didn't want plain old square cut mud flap. Spyderpops critter gitter. Gremlin Bell
-
Originally Posted by Dan_Ashley
Whew! There are lots of reasons to establish an outside-inside-outside line in turns, and to brake before the turn, roll on the throttle through the turn....doing this increases turning radius, allows more visibility around the turn, more separation from oncomming traffic, and maximizes availabe traction.
Today it saved my life! Really.
I was driving in the mountains, taking a right curve, outside-inside-outside, starting to roll on the throttle. BIG TRUCK...TOO HOT IN THE TURN...OVER THE YELLOW LINE...HEADED FOR ME...relax, relax, swerve right, plenty of pavement, SWERVE NOW! Lifted right wheel. Nanny kicked in...did not collide with the truck. Whew.
Glad everything worked out for you. I have been there myself, but it was a Harley, not a truck.
Is it Friday yet? ... Oh yeah, I forgot. I'm retired
Past bikes
2010 RS - Sold
2012 RT - Sold
2014 RT - Testing completed
2016 F3-T Audio package - Sold
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|