-
Registered Users
Chatter noise when taking off...
I'm hearing a chattering/ratcheting noise a when taking off. It's happening in both 1st and reverse gears and sounds like it's on the right side around the area of the floor boards. I brought it to the shop and they said they couldn't duplicate it so I duplicated it for them. They've had some difficulty with diagnosing and brought BRP in. They ended up saying they were going to replace the clutch pack. It was supposed to be ready late yesterday but I still have not heard from them as of closing time today. I'm thinking the clutch pack didn't fix it.
2013 ST Limited with the SE5 and 4000 miles... Any thoughts?
His: 2012 HD Tri Glide Ember Red/Merlot
Hers: 2012 Can Am Spyder RT-S Quantum Blue Metallic
-
Very Active Member
Interesting..!!
seems the clutch would make that noise in all gears. Sounds more like something to do with the gear. First and reverse are the same gear. Will be interesting to see what they find. Let us know when you find out...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Registered Users
Originally Posted by Chupaca
seems the clutch would make that noise in all gears. Sounds more like something to do with the gear. First and reverse are the same gear. Will be interesting to see what they find. Let us know when you find out...
Well Chupaca, sounds like you may have been correct. My wife went to get my ST-L today while I'm at work and it's still making the same noise, not as bad but it is. And to add to it, now it's not shifting properly. At one point, she put it in reverse, the indicator light came on but it didn't move. She had to rock it back and forth for it to actually shift. I won't get a chance to actually check it out myself until tomorrow night when I get home from work. I called the dealer and they are sending their truck and trailer over to pick it up Monday morning. I've had 4000 trouble free, fun miles and I'm sure they'll figure it out but it's getting a little frustrating. Our ryding season in Maine will soon be...................... I don't even want to say it.
They did the recall and my second service while they had it. I'll keep you all posted as to what happens next.
His: 2012 HD Tri Glide Ember Red/Merlot
Hers: 2012 Can Am Spyder RT-S Quantum Blue Metallic
-
Same here
Originally Posted by EnjoyingTheRyde
I'm hearing a chattering/ratcheting noise a when taking off. It's happening in both 1st and reverse gears and sounds like it's on the right side around the area of the floor boards. I brought it to the shop and they said they couldn't duplicate it so I duplicated it for them. They've had some difficulty with diagnosing and brought BRP in. They ended up saying they were going to replace the clutch pack. It was supposed to be ready late yesterday but I still have not heard from them as of closing time today. I'm thinking the clutch pack didn't fix it.
2013 ST Limited with the SE5 and 4000 miles... Any thoughts?
I have the same issue with my 2013 ST-S....
-
Registered Users
I have the same issue as described... however I'm right at the oil change mileage and I'm thinking nice fresh oil will clear it up. Or... hoping... praying?
tHe SmOkEr YoU dRiNk ThE pLaYeR yOu GeT!
-
...in the pink (Girls On Spyders)
I have the same issue and with 10,000 miles and 3 oil changes no difference take off and reverse....it clatters and shakes....mine is in the shop
#IamARyder #RideASpyder #CanAmSpyder
-
Registered Users
Originally Posted by flamingobabe
I have the same issue and with 10,000 miles and 3 oil changes no difference take off and reverse....it clatters and shakes....mine is in the shop
Well that's not good to hear...
tHe SmOkEr YoU dRiNk ThE pLaYeR yOu GeT!
-
Registered Users
Originally Posted by flamingobabe
I have the same issue and with 10,000 miles and 3 oil changes no difference take off and reverse....it clatters and shakes....mine is in the shop
Please keep us posted, I'll do the same. Mine is in the shop also. I think I mentioned they replaced the clutch pack, the chattering isn't as prevalent but it's still there. Went to visit the shop yesterday to find out what their plan is but the mechanic has Tuesday off. They said they would call me today.
flamingobabe, has yours done this since new?
His: 2012 HD Tri Glide Ember Red/Merlot
Hers: 2012 Can Am Spyder RT-S Quantum Blue Metallic
-
I would be nice if it just needed new oil filter and oil change will fix the issue. Let us know.
2012 Spyder RT SE5 Brake pedal mod
-
...in the pink (Girls On Spyders)
yes ...mine has clattered and shock since I had it...thought it was just me.....mine is in the shop.....we'll see what they do to fix it.
#IamARyder #RideASpyder #CanAmSpyder
-
My 13 RS-S makes a shuddering sound if I take off when the engine is still cold but after that its fine. Hope its not a sign of bad things to come.
-
-
Registered Users
Chatter noise when taking off...
Their willbe a soft ware update soon. To fix 13rts on this.per brp most all 13 have this . Stay tune will let you know when it comes out...
-
Registered Users
mine will be in the shop tomorrow
since mine is going to the shop, i will also tell them about this issue see if they know anything of it and if so to correct it, and any other issues they might fine or know of.
and yes keep us informed if there is a BUD update... thanks.
Rick11Flor practicing for retirement. Everyday is a new day and I try to live it to the max.
We (DW and I) travel to distant lands three or more months per year now looking for a Outlaw to take the Spyder along.
-
Registered Users
Per Steve BRP their will be a fix? Time wise ? Soon they say? But will help on heat and all outher great things going on the 13 . Shure will keep all up dated when ready for the Buds.. Ride safe all this weekend.........
-
Registered Users
Please enlighten me...
Originally Posted by Spacetrucker
Their willbe a soft ware update soon. To fix 13rts on this.per brp most all 13 have this . Stay tune will let you know when it comes out...
I'm not computer savvy, and I don't know the inner workings of our Spyders, but how will a software update help something that sounds so mechanical? What is the issue here? What is actually happening at take off when you first twist the throttle? I'm sorry for being numb but I'm going to visit my dealer today and since it's been in three times for this I'd like to pass along any info I can. Also, who is Steve at BRP?
I want my ryde back...
His: 2012 HD Tri Glide Ember Red/Merlot
Hers: 2012 Can Am Spyder RT-S Quantum Blue Metallic
-
...in the pink (Girls On Spyders)
Originally Posted by Spacetrucker
Their willbe a soft ware update soon. To fix 13rts on this.per brp most all 13 have this . Stay tune will let you know when it comes out...
waiting.....this is the 2nd time I have heard this......I quit riding my bike August 26...per BRP request...hope BRP gets these 2013's fixed soon....I'm crazy with not riding...my clatters and shakes on take off and reverse...stalls and/or leaps...hot or cold.....etc
Last edited by flamingobabe; 09-20-2013 at 09:41 AM.
#IamARyder #RideASpyder #CanAmSpyder
-
Registered Users
First thanks for this thread. I got just over 5000 on my 2013 and although some of you have said that the shuttering happens when it is cold mine seems to do it when it is hot, I shut down for a short stop, and then when I start up to take off it shutters and in some cases stalls. I am headed in on Monday for the recall and am going to bring it up to the service Dept, since the stalling seems to be getting worse. I was hoping the 4600 service would identify the issue but when they hooked it up the dealer said all was good. I will update like everyone else if I hear something on what the cause or fix is.
-
Very Active Member
Originally Posted by Gunny
First thanks for this thread. I got just over 5000 on my 2013 and although some of you have said that the shuttering happens when it is cold mine seems to do it when it is hot, I shut down for a short stop, and then when I start up to take off it shutters and in some cases stalls. I am headed in on Monday for the recall and am going to bring it up to the service Dept, since the stalling seems to be getting worse. I was hoping the 4600 service would identify the issue but when they hooked it up the dealer said all was good. I will update like everyone else if I hear something on what the cause or fix is.
Mine also did this once, and only when it was hot. Told the service writer at the dealer about it when it was in for purge valve replacement. Since it only happened once he blew it off.
-
Registered Users
I still ride my 13 with all of this trouble. But I will not stop riding it until some one at brp fix or updates buds. But like I said, their is a up date for the buds system to help on heat and chad in trans . Lot of dealers do not call to find out about up date? Why just to lazy to do it. That is way we have a great dealer here to help us out. They are great to have and deal with. They are Pro Caliber,in Longview, wa. Shawn is our tech , the greats one he is and he will call BRP and find what the hell is going on with your bike.. ... As of to day they have not said when but getting closer on sending out up date. So Standing by we are.... Ride safe all this weekend..........
-
Registered Users
Originally Posted by flamingobabe
waiting.....this is the 2nd time I have heard this......I quit riding my bike August 26...per BRP request...hope BRP gets these 2013's fixed soon....I'm crazy with not riding...my clatters and shakes on take off and reverse...stalls and/or leaps...hot or cold.....etc
So did they give you something to ride while yours is being worked on and if not what do you plan to do about it
Rick11Flor practicing for retirement. Everyday is a new day and I try to live it to the max.
We (DW and I) travel to distant lands three or more months per year now looking for a Outlaw to take the Spyder along.
-
Originally Posted by flamingobabe
waiting.....this is the 2nd time I have heard this......I quit riding my bike August 26...per BRP request...hope BRP gets these 2013's fixed soon....I'm crazy with not riding...my clatters and shakes on take off and reverse...stalls and/or leaps...hot or cold.....etc
So they requested or advised you to stop riding your spyder that I assume is under warranty . Now this is going on a month of down time and they never offered you a loaner or anything?
-
...in the pink (Girls On Spyders)
Originally Posted by Rick11Flor
So did they give you something to ride while yours is being worked on and if not what do you plan to do about it
scott16119 So they requested or advised you to stop riding your spyder that I assume is under warranty . Now this is going on a month of down time and they never offered you a loaner or anything?
To answer your questions...I do not have a loaner....my case worker said..."please do not ride your Spyder"....talked to dealer today and waiting for rain to go away...do a test ride...check off my list....then they will call.....what am I suppose to do....I have a hot 2013, $25k+ Spyder....I plan to do what ever BRP wants....I'm sure they say "oh $#!% it's Ms Baker again.......
#IamARyder #RideASpyder #CanAmSpyder
-
Registered Users
Originally Posted by flamingobabe
I'm sure they say "oh $#!% it's Ms Baker again.......
I hope they do Give em hell!
tHe SmOkEr YoU dRiNk ThE pLaYeR yOu GeT!
-
Registered Users
Went to my dealer yesterday...
They replaced the clutch pack and the chattering was still happening but much less prevalent. I stopped by again yesterday and the tech told me that he was 2mm off on the clutch install so he added a shim and is now waiting for o-rings/gaskets. Does this makes sense with an SE5? It should be ready Wednesday.
His: 2012 HD Tri Glide Ember Red/Merlot
Hers: 2012 Can Am Spyder RT-S Quantum Blue Metallic
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|