-
GOS Founding Member (Girls On Spyders)
-
SpyderLovers Founder
I also learned that this pipe does require a gasket.
This is really good information as other may not be so lucky as to reuse the old gasket. I know the 90 I had on my Yoshi didn't require a gasket but it was a little different than your setup.
-
Very Active Member
Congrats..!!
glad it finally came together. Looks awesome and I know the sound. Enjoy it..!!
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
SpyderLovers Sponsor
Very nice. I think the Yoshi has the best sound of any pipe I've heard. Mine has lasted a long time, which cannot be said for many others. Our Spyders are very hard on exhaust components.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Registered Users
Other than coating the chrome did you have to mod anything else? Was this simply a snap on?
thank u.
If you ryde like there's no tomorrow, there won't be any
Accidents hurt - safety doesn't
-
GOS Founding Member (Girls On Spyders)
Originally Posted by Topshotta
Other than coating the chrome did you have to mod anything else? Was this simply a snap on?
thank u.
Well, I'd call it slip-on rather than snap-on, but no. No other mods needed to make it work. Do carefully check out the provided bolt and nut that comes with it. My nut was the wrong size and it was missing a washer. Fortunately, my dad has lots of extra stuff like that hanging around.
-
Very Active Member
Looks great! Shoulda had you come over and do mine! Yoshi's got a great rep; and there's no such thing as "too much CF". Out of idle curiosity..................did they strip the finish off the pipe before ceramic coating, or coat over the top of it? TY!
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
Registered Users
I've been looking at the Yosh as well since that and the Two Brothers are the only options right now for the 2013. I also did not like all the chrome on the CF muffler just as you..lol... I was thinking of just using some flat black exhaust paint to cover the ugly chrome. Did you consider this option and if so what made you opt for the jet hot coating? Thanks!!!
2013 RSS
Grip Puppies, Calsci Tinted Shorty windshield, Garage remote mod
-
GOS Founding Member (Girls On Spyders)
Originally Posted by Flanker
Looks great! Shoulda had you come over and do mine! Yoshi's got a great rep; and there's no such thing as "too much CF". Out of idle curiosity..................did they strip the finish off the pipe before ceramic coating, or coat over the top of it? TY!
I only sent off the 90 degree pipe and the bracket, neither of which were carbon fiber coated. I debated taking off the carbon fiber sleeve and sending it off too so I could get rid of ALL the chrome, but the sleeve is riveted on and I didn't want to mess with it.
As you can see from the pic below the only chrome now left is the little funnel-shaped piece that connects the pipe to the muffler (and the 2 riveted on straps). It'll dull over time anyway.
It might be interesting if someone bought their all stainless pipe and sent the whole thing off to be ceramic coated.
IMG_5573sm.jpg
-
GOS Founding Member (Girls On Spyders)
Originally Posted by Orange monster
I've been looking at the Yosh as well since that and the Two Brothers are the only options right now for the 2013. I also did not like all the chrome on the CF muffler just as you..lol... I was thinking of just using some flat black exhaust paint to cover the ugly chrome. Did you consider this option and if so what made you opt for the jet hot coating? Thanks!!!
I thought long and hard about painting. Several things led me to decide that wasn't the way to go:
1. The Yoshi pipe is stainless steel. By nature, hard to paint. I would have had to rough up the surface, prep/prime very carefully, paint very carefully, oven cure (to get the best longevity) and then cross my fingers. I got on a lot of sports bike boards and the read the results of guys who had tried high heat paint. ALL of them were mixed results at best.
2. Even if I had great results, the paint would pretty much have to be touched up every year. Ain't nobody got time for that.
3. I considered powder coating, but liked the idea of some heat control along with the protective colored coating. In the below thread MikeinGA gave me the link to Jet-Hot and I was really happy with their price and turnaround time. http://www.spyderlovers.com/forums/s...ceramic+coated
For the price and the effort, it just seemed like the right move with the longest lasting result.
-
Very Active Member
when i try to go to your sight to hear the pipe it says its not avaliable.This content is currently unavailable
-
GOS Founding Member (Girls On Spyders)
-
I installed a 77 on my RT also. Did you leave the sleeve (decibel killer) in or did you remove it. Mine was spt welded, so I left it in
-
Registered Users
I have the hindle which fits with my Corbin bags anyone know if the yoshi works with the Corbin'sCorbin's
“The only thing necessary for the triumph of evil is that good men should do nothing.” Edward Burke
-
GOS Founding Member (Girls On Spyders)
Originally Posted by Jbiancolli
I installed a 77 on my RT also. Did you leave the sleeve (decibel killer) in or did you remove it. Mine was spt welded, so I left it in
Interestingly, they now provide it as an optional insert rather putting it in and then requiring you to take it out. I just left it off.
-
Thanks. They only show epa compliant (welded insert) for the RT now
-
GOS Founding Member (Girls On Spyders)
Originally Posted by Jbiancolli
Thanks. They only show epa compliant (welded insert) for the RT now
Huh. That's odd. On the RS version they even list it as a separately provided part "Low Volume Insert" http://www.yoshimura-rd.com/images/p...df/1530202.pdf
Maybe they have some preconceived ideas about RS vs RT riders?!
-
Registered Users
Thanks for the info on painting vs Jet Hot... The pipe sounds great!!!!
2013 RSS
Grip Puppies, Calsci Tinted Shorty windshield, Garage remote mod
-
Originally Posted by Orange monster
I've been looking at the Yosh as well since that and the Two Brothers are the only options right now for the 2013. I also did not like all the chrome on the CF muffler just as you..lol... I was thinking of just using some flat black exhaust paint to cover the ugly chrome. Did you consider this option and if so what made you opt for the jet hot coating? Thanks!!!
In can am's 2013 catalog they sell the Akrapovic Silencer for 2013s $899.99
219400444 (Sport)
219400443 (Sport Touring)
I have stock exhaust and haven't ventured down this farkle path yet, but I thought I would mention it as another option for you.
-
Very Active Member
Is that a certified catalytic converter to meat the EPA standard? It looks great and sounds good with your RSS color. I have the same color 2011 RSS.
Mike
Mike
-
Very Active Member
-
Very Active Member
Congrats on the pipe... that ceramic is suh-weet!
And you lucked out on the gasket. (Ahem... had you searched around here before the install, you would have discovered you needed that 99 cent part http://www.spyderlovers.com/forums/s...p-me-overnight)
Oh, and BTW, one of your reasons for the Yoshi was the same as mine-- "(3) no need for fuel management".
Unfortunately, be aware that this isn't true for everyone. Some RS owners find their bikes take to the Yoshi without any problems; sadly, my RS didn't love the Yoshi out of the box. A few weeks after running it the slowly increasing popping and backfiring led me to "pull the sweater-thread" and mod the heck out of my RS, as mentioned below. Hope you have better (read: cheaper!) luck.
http://www.spyderlovers.com/forums/s...icebox-**Pro**
Silver 2010 RS SE5: Triple Play, Taillight, Brightsides, Fender Tips, Easy Risers; Evo Sway Bar; Airhawk R & Beadrider; latch springs; Grab-On grips; Crampbuster; 24" Madstad smoke windshield & deflectors; N-R round bag & soft saddlebags; BRP handlebar bag; Throttlemeister; Spyderpops Missing Air Dam & Air Mgmt System; Rivco driver & passenger boards & pegs; ISCI parking brake extension; Ultimate Midrider Seat w/both backrests, Fox Racing Shocks, Yoshi R-77 exhaust and a whole lotta love!
-
GOS Founding Member (Girls On Spyders)
Originally Posted by daveinva
Congrats on the pipe... that ceramic is suh-weet!
And you lucked out on the gasket. (Ahem... had you searched around here before the install, you would have discovered you needed that 99 cent part http://www.spyderlovers.com/forums/s...p-me-overnight)
Oh, and BTW, one of your reasons for the Yoshi was the same as mine-- " (3) no need for fuel management".
Unfortunately, be aware that this isn't true for everyone. Some RS owners find their bikes take to the Yoshi without any problems; sadly, my RS didn't love the Yoshi out of the box. A few weeks after running it the slowly increasing popping and backfiring led me to "pull the sweater-thread" and mod the heck out of my RS, as mentioned below. Hope you have better (read: cheaper!) luck.
http://www.spyderlovers.com/forums/s...icebox-**Pro**
I missed that post, but if I'd skimmed it quickly I still might not have quite realized it since most of the comments talk about NOT needing the gasket. I did luck out for sure.
I'm hopeful mine will "take" well. I did notice some popping on decel in 1st and 2nd gears mostly. If it only does it there, then I can live with it. But it's nice to know I do have options for fixing if needed. Now I just need to get some miles with it!
-
Very Active Member
Originally Posted by FaranH
I only sent off the 90 degree pipe and the bracket, neither of which were carbon fiber coated. I debated taking off the carbon fiber sleeve and sending it off too so I could get rid of ALL the chrome, but the sleeve is riveted on and I didn't want to mess with it.
Aaaaahhhhhhh!!!!!!!! You have a sense of humor . Yes, I know you only sent the pipe and bracket in.......................you showed us photos of them in your original post. Which is why I was curious if the vendor had stripped "the pipe" (I was assuming it was a chrome plated unit, rather than polished SS) prior to ceramic coating, or if it was applied over the top of the chrome. No matter. In any event; I think it looks quite nice with the black pipe and chrome highlights on the CF can (aka muffler). Good job.........................thanks for the reply!
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
GOS Founding Member (Girls On Spyders)
Originally Posted by Flanker
Aaaaahhhhhhh!!!!!!!! You have a sense of humor . Yes, I know you only sent the pipe and bracket in.......................you showed us photos of them in your original post. Which is why I was curious if the vendor had stripped "the pipe" (I was assuming it was a chrome plated unit, rather than polished SS) prior to ceramic coating, or if it was applied over the top of the chrome. No matter. In any event; I think it looks quite nice with the black pipe and chrome highlights on the CF can (aka muffler). Good job.........................thanks for the reply!
Well... as you are aware some people post questions without reading all the posts. I didn't think you were "one of those" but you might have been off your game. So I wanted to clarify just in case. And I believe it was straight polished SS so they didn't have to strip it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|