Floor boards for 2012 rss

[ScarMace]

Can anyone recomend a decently priced pair of floor board for a 2012 rss se5?

[SpyderAndy]

I just put the rivco boards on my 2012 RS and I like them so far.

[Laila's Dad]

I also have the Rivco floorboards and really like the look and feel of them. The price will be about $320 for the set.

[ScarMace]

thanx for the info

[Motorcycledave]

Here are the boards & road pegs on mine... I love them

IMG_4460.jpgIMG_4386.jpg

[ARCTIC]

I put rivco on mine too. They're heavy built. My bike already had highway pegs on it that were using the front chassis mount bolts so I had to cobble

[Topshotta]

Here are the boards & road pegs on mine... I love them

IMG_4460.jpgIMG_4386.jpg

Do you have to lift your feet of the floor board to hit the brakes?

[strictlyred]

I have the larger brake pad on my bike, would these floorboards fit with them

[ARCTIC]

I have the larger brake pad on my bike, would these floorboards fit with them

They are below the travel of the brake lever. A bigger brake lever pad should not have any affect on it

[SpyderAndy]

I have the bigger brake bad on my RS. It works with the boards but it hangs over the board quite a bit. It makes it hard to use the center of the board because your foot is under the brake. I'm saving up to get the hand brake so I can put the small pad back on and open up more space. I usually end up with my foot on the outside edge of the board. Once I get the hand brake ill put the small pad back on and use the hand brake as the primary brake. That way I only have to find the foot brake in an emergency. I took a picture but the system keeps saying they are invalid. I'll post it later if I can figure out the problem

[strictlyred]

thanks, I am saving for hand brake as well.. maybe we can get a 2 for one deal..lol..

[Motorcycledave]

You don't have to lift your foot any more than you would in a car...
but I have since the pictures installed ISCI brake extension and larger pedal
fantastic.....

Do you have to lift your feet of the floor board to hit the brakes?

[ARCTIC]

Be careful of trapping your foot under the brake pedal with the handbrake installed. The pedal still has to move and if you have your paw underneath it when you grab the handbrake.... could be bad. You'd have quickly and conscientiously release the brake, move your foot and grab the brakes again

[ISCI Billy]

Be careful of trapping your foot under the brake pedal with the handbrake installed. The pedal still has to move and if you have your paw underneath it when you grab the handbrake.... could be bad. You'd have quickly and conscientiously release the brake, move your foot and grab the brakes again

Always make sure you have the proper brake pedal (hinged) to avoid safety issues. This is very important if you have ISCI Floorboards and the ISCI Hand Brake.

[mcaccamise]

In my opinion the Rivco boards are a cloned Harley floor board and dont fit the style of the roadster i have the ISCI boards which look much better and work better with the extended brake pedal they made all the difference in the world as far as comfort just the right drop to hit the brakes.
Mike

[ARCTIC]

In my opinion the Rivco boards are a cloned Harley floor board and dont fit the style of the roadster i have the ISCI boards which look much better and work better with the extended brake pedal they made all the difference in the world as far as comfort just the right drop to hit the brakes.
Mike

Well, here's another opinion.... you have maintained a "sport" appearance on your machine. Mine is quasi converted to a cruiser style. Tall windshield, Corbin seats with backrests, highway pegs....etc. I think the rivco look the best for my bike

[sealfloorboards]

You might want to take a look at sealfloorboards.com Gallery Page for some great looking RS's with Seals. The brake is actually mover 2" forward so your legs can be stretched out when braking. No Modification of your bike required and you don't have to lift your foot off the brake to stop, just rotate on the ball of your foot and brake with your heel. It's a very smooth and natural movement.

A bunch of very happy new Seal Riders here at Spyders in the Redwoods!

Ride in comfort,
John
Seal Floorboards

[Spidey Girl]

I have a 2012 RSS SE5 and I hate to sound uninformed but will the RIVCO floorboards work on it?

[wolfee]

I had them on my 2010 RSS SE5 and had no problems.

[Spidey Girl]

Thanks so much. I believe I order a set today. I appreciate the information.

[Motorcycledave]

The Rivco boards are very much like the boards on a Harley they are very strong and well belt
They have them to fit your trike... one of our members here is a rep with Rivco I think her name is Cheryl
They are a sponsor here
Dave

I have a 2012 RSS SE5 and I hate to sound uninformed but will the RIVCO floorboards work on it?

[CARA @ RIVCO]

I am the new Rivco rep for spyderlovers if anyone has any questions

[bbodah]

Can anyone recomend a decently priced pair of floor board for a 2012 rss se5?

RS Web Boards will be available by next week. These will fit all years of the Model RS electric shift. Black linex.


Thanks, Bill
RSS Spyder (3)a.jpgRSS Spyder (5)a.jpg

[Spidey Girl]

I love those. Can you tell me where to get them? They look great on your bike. I am ordering the Revco highway pegs, but really love the web floor boards!

[bbodah]

I love those. Can you tell me where to get them? They look great on your bike. I am ordering the Revco highway pegs, but really love the web floor boards!

Hello Spidey Girl,

Thanks for your comment!

You can contact me at 603-228-6617.(7:00-3:30 eastern time) My name is Bill and these will be on my web site (www.web-boards.net) by the end of next week. However if you would like to order sooner you can call the shop. You may speak with Tracey or Bill

Thank you, Bill