-
Active Member
Will BRP saddlebags work with my Rs setup?
I am looking at putting the BRP saddlebags on my 2011 RS. I did find a post from a while back talking about install and problems encountered, very helpfull. My question is my setup. I have the sport rack/back rest with the release under the seat which may or may not hinder a bracket in the bag install. I also have the rear footpeg extenders that required a beefup bracket. Does anyone have the setup of all 3? Keep in mind removal of the later 2 is not an option since it keeps the wife happy.
2015 RT-S pearl red/black Special Series with triaxis handlebars .
-
I wouldent think there would be a broblem i have seen them installed with your mods good luck.
-
Very Active Member
Yes they will work...I have all three. I put the rear foot peg extensions last, so I didn't need the brackets that came with them. The brackets that came with the saddle bag kit worked just fine. I didn't compare the 2 sets of brackets they maybe the same. Maybe somebody who has all three might know and chime in
HAPPY SPYDER OWNER
GULF COAST SPYDERRYDERS
-
Saddle bags
I also have all 3,brackets for foot pegs work too.Everything works perfect.
-
Active Member
+1
Originally Posted by Capt John
Yes they will work...I have all three. I put the rear foot peg extensions last, so I didn't need the brackets that came with them. The brackets that came with the saddle bag kit worked just fine. I didn't compare the 2 sets of brackets they maybe the same. Maybe somebody who has all three might know and chime in
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|