|
-
Very Active Member
 2013 shocks
The shocks on my 2013 ST limited are not adjustable and I found a shock wrench in my tool kit. Does the shock wrench serve another purpose or can I throw it in the big round filing cabinet?
2018 F3 LIMITED
-
Very Active Member
 Originally Posted by billybovine
The shocks on my 2013 ST limited are not adjustable and I found a shock wrench in my tool kit. Does the shock wrench serve another purpose or can I throw it in the big round filing cabinet?
You must have gotten an old tool kit. My 2013 RT did not have it.
May all your encounters with the law begin with the words: "nice trike!".[/B]
 2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
 Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
Thinks out loud
In case you get a RT 622 ? Then you would use it.
Identify what you have control over and find peace with what you don't.
-
Motorbike Professor
Originally Posted by Jerbear
In case you get a RT 622 ? Then you would use it.
Good thinking!
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
Very Active Member
tool kit in my 13 (RT) did not have it either.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Maybe I got an old tool kit! I got a shock wrench and a tire pressure gage that does not work.
IMG_00000027.jpg
So the next question is there anything missing?
Also what's the long allen wrench for? I don't remember it in my GS kit.
2018 F3 LIMITED
-
2013 shocks
No shock wrench in my tool kit also. Is the long hex wrench used for adjusting the passenger floor boards?
Sent from my iPad using Tapatalk HD
-
Very Active Member
Don't know as I'd toss it. I've got a 25 + year old shock adjustment spanner I got with some long forgotten motorcycle tool kit................I still use that once in a while. Still use the spring puller/stretcher tool I got with a Kerker exhaust system back in the 80s.
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
Motorbike Professor
Save it (or sell it). If you ever get an RT-622 trailer, you will need it for those shocks.
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote