-
-
...in the pink (Girls On Spyders)
I'm a lucky women....he's a great guy to have around...kinda cute...too
#IamARyder #RideASpyder #CanAmSpyder
-
Very Active Member
Re: Intallled FB's CB today
From Deep in the Hart of Texas!
2012 RT A&C bought new 42312 sold July 2018 56k miles currently driving a 2014 RTSE6 LTD bought October 2018 w 6800 miles nicely farkled
-
It is pretty obvious that the engineers who design these machines would never in a million years try to work on them.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Originally Posted by hotglue
I gotta tell ya.... gettin' in to work on the ST is a WHOLE lot different than working on the RS....
Just getting the body panels on and off was a CHORE!!!!! they don't fit right..... next time I do it.. I'll drill new holes.. about 1/2" off the center of the ones on the body panels to make them fit....the mirrors were an experience that will be a WHOLE lot easier next time!!!!.... I learned some new words today... and increased my vocabulary..... .... 3 different size bolt heads.... one hex, and two different sizes of torx... on the same panel... and some are hidden where ya don't know what they are....til ya find that ya don't have a wrench that fits.....AKKKKKKKKK. Make sure ya have some baggies ta put the bolts in.. and mark where they came from....so ya can put it back together..... ( wish I had done that)
But... it is all back together!!!! FB is Happy Happy Happy .. and she has her CB... and rear luggage rack!!!!
no bolts left over!!!!
Great job Mark!
-
-
Mod Maniac
Originally Posted by flamingobabe
I'm a lucky women....he's a great guy to have around...kinda cute...too
I think hotglue is lucky! He has a great woman (FB) but she is, apparently, partially blind.
ata = allergic to asphalt
My mods: https://www.spyderlovers.com/forums/...ead.php?t=5753
.
There are two kinds of people: (1) those who can read, reason and apply the experiences of others; and (2) those who just have to pee on the electric fence. ataDude, 2009
My Spyder:
-
Originally Posted by ataDude
I think hotglue is lucky! He has a great woman (FB) but she is, apparently, partially blind.
I am a LUCKY man....Works for me!!!!! I hide her glasses every chance I get!!!!!
Last edited by hotglue; 05-18-2013 at 09:34 PM.
-
Active Member
Is it the rt cb kit? I'll agree, the st's body work is a total pain to work with, I had to pull almost all of the front body work just to put in the 12v outlet, and I invented plenty of new words, I think some in strange languages lol
-
...in the pink (Girls On Spyders)
not rt kit....a J&M cb.....had it on the 2009 RS
#IamARyder #RideASpyder #CanAmSpyder
-
Spydermyke, This is the unit we took off of the 09 RS and put on the ST-L.
http://www.jmcorp.com/SeeProducts.asp?PF=38
It mounted great onto the Butler drink holder bolt on the forward side of the clamp.
-
Could you post a picture of where/how the unit is mounted?
-
...in the pink (Girls On Spyders)
Originally Posted by azjerry
Could you post a picture of where/how the unit is mounted?
resize1.jpgresize2.jpg
#IamARyder #RideASpyder #CanAmSpyder
-
very nice thanks for the pics.
-
Very Active Member
any tips on what you do differently if doing it again. definitely doing this on the new ST.
thanks! figure learn from others ....
2013 Yellow ST-S SM5, Elka Stage1 Rear Shock, 2Brothers Exhaust, K&N Air Filter(soon), TricLED fnt fender LEDs, frnt LED daylight strips, 3rd Rear brake LED, ISCI Hand Brake, BajaRon Sway Bar&Links, Bullant Laser Aligned, Lamont's CAT ByPass, CALSCI Windshield, Works Performance Stage 5 Front Shocks
Previous = 2010 Blue RT-S Spyder SM5
-
OK here is the question how did you attach it to the handlebar
Originally Posted by hotglue
Hi,
What is the model of the drink holder, and what support bar did you use on the J&M??
Thanks
-
Originally Posted by RetiredCGRider
Hi,
What is the model of the drink holder, and what support bar did you use on the J&M??
Thanks
The drink holder is a Butler, made for the RT, also fits the ST. The support plate that the J&M mounts to is the same one I used on FB's RS. I think I used one for a Yamaha J&M mount.... I was in a CB shop that had a bunch of different mounts and picked one that would work on the RS the way I had it mounted. To make it work on this bike, I had to turn it upside down. It is bolted to the radio with only 2 screws instead of 3..... seems solid, but if I ever get to a shop that has a selection I can pick up and look over some different mounting plates, I may pick a different one so I can get the 3rd screw in place. Or I could build one..... (that would probably be easier)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|