Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Wazoo, I was wondering if you were able to find a rectangled weather proofed usb switch for the rocker slot? @Bullant12 idea was brilliant but the previous owner had the CB kit inatalled and the circle in use, so I need to use the free bays on the right.
That's a pretty cool location to have it, but I have a cellphone holder that will not work for me as the cable will go outside and may bend the rubber seal.
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
The one that goes in the rocker switch location are only weather proof when not in use. The USB+12v I have comes with a weather proof in use cover for one cable.
I was going to do this but a few posts said I might screw up the rubber seal, wasn't sure that was a big deal , what have you experienced ? How tough was it to get the nut tightened on the power plug ? Where did you hook the wire to ? direct battery ? Any info you could give me will be helpful .....thanks for your post
Originally Posted by GeekyRider
That's a pretty cool location to have it, but I have a cellphone holder that will not work for me as the cable will go outside and may bend the rubber seal.
The one that goes in the rocker switch location are only weather proof when not in use. The USB+12v I have comes with a weather proof in use cover for one cable.
JT
Technically true, but I have used mine in the rain lots of times. Low voltage doesn't conduct in water very well.
Technically true, but I have used mine in the rain lots of times. Low voltage doesn't conduct in water very well..
That's not the concern. Corrosion of those tiny contacts is.
Sent from my SM-T350 using Tapatalk
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
2011 RT-S SM5 - Black
Bought June 2013 with 450 miles. 27K on 8-1-2017.
Farkles - DIY Trunk Break Light, HMT Break Light, DIY Mirror Turn Signal Lights, DIY Bluetooth Dongle, DIY iPod Setup, DIY Alarm System Install, Show Chrome front fender / rear saddle bag lights, 4th break light around the trunk, Vented Windshield, Baja Ron Sway Bar, DIY GPS setup, Smooth Spyder, BRP Chrome Mirrors, Adjustable deflectors, Triaxis handlebars, NVB Pegs, Bad Boy Airhorn... More to come
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Check out JT's Spyder Store for a product called, Carchet Car 3.1. It's a dual USB power outlet that fits in the center empty rocker switch slot. Looks like original equipment manufacture when installed. Has blue illumination, making it visible at night.
Check out JT's Spyder Store for a product called, Carchet Car 3.1. It's a dual USB power outlet that fits in the center empty rocker switch slot. Looks like original equipment manufacture when installed. Has blue illumination, making it visible at night.
Same as I posted above from Amazon for $6 cheaper.
2011 RT-S SM5 - Black
Bought June 2013 with 450 miles. 27K on 8-1-2017.
Farkles - DIY Trunk Break Light, HMT Break Light, DIY Mirror Turn Signal Lights, DIY Bluetooth Dongle, DIY iPod Setup, DIY Alarm System Install, Show Chrome front fender / rear saddle bag lights, 4th break light around the trunk, Vented Windshield, Baja Ron Sway Bar, DIY GPS setup, Smooth Spyder, BRP Chrome Mirrors, Adjustable deflectors, Triaxis handlebars, NVB Pegs, Bad Boy Airhorn... More to come
This is the exact part you need for what you describe. It is made by the same manufacturer as the switches and will fit those slots without any cutting. Enjoy!
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
There's a company called JT's Spyder Store. They have a dual USB "switch" called the Carchet Car 3.1. It fit's neatly in one of those unused rocker switch slots. It looks like an original equipment manufacture, has a weather proof cap, and has blue illumination that is visible in low light. Check them out one day. I've enclosed a link here, but don't know if it can be accessed.
Wazoo, I was wondering if you were able to find a rectangled weather proofed usb switch for the rocker slot? @Bullant12 idea was brilliant but the previous owner had the CB kit inatalled and the circle in use, so I need to use the free bays on the right.
I have been looking at the dual USB with the Volt meter setting on my desk thinking of putting it in the empty slot but was worrying about it getting wet, After two weeks I went with the in side of the glove box route< I wanted it to be able to charge when i was parked but didn't want it on all the time so I found a Dorman mini rocker (Waterproof) installed it in the empty spot wired to the USB in the glove box alone side of a standard power outlet,
Now I can turn it on and charge what ever and still be able to see the voltage.
install.jpginstall2.jpginstall3.jpg
Seeing I have never had the tupperware off and thanks to BMW and my old K1200LT I had a good idea but still getting to the Glove box is a real Pain
Dick Harding
Boise,ID
2011 Spyder RT SE5 Limited
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "Wow! What a Ride!
Having only a RT A/C I have 2 open rocker switches on the dash. Has anyone engineered putting a USB outlet (preferrrably whether proof) in the empty rocker switch slot?
Don't know if you've managed to find a solution to your question yet, but you might try JT's Spyder Store. There's a device he sells which fits into that empty rocker switch slot, is weatherproof, looks OEM, is illuminated at night, has the jacks for two USB plugs. It's called a Carchet Car. And I have one installed on my 2012 Can Am Spyder RT-S. Just a thought.