-
Blazing Member
-
-
Motorbike Professor
-
He said that it'd SAVE an hour of time..
-
Very Active Member
-
-
Very Active Member
Originally Posted by Bob Denman
Did you have that Grillework for the left side laying on the refuse pile?
I've been told that it'll fit over on the right side if you are so inclined...
Or if you're NOT using it....
It can be MADE to fit.
I'd say it was a skill level of 3 or greater.
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
-
Registered Users
Mirror removal during oil change
I installed my new side panels this week also. I don't remove mirror or top side panel when I change the oil. I remove the screw by the glove box and pop the two studs out of the grommets of the top panel. I can then remove the middle side panel. I will see how much help it will be now that I won't even have to remove the middle side panel the next oil change next spring.
RT-S: HMT brake light, mud flap lights/turn signals, Trailer hitch, Garmin 660 GPS, Ride-On, Travel cover, LED Mirror turn signals, LED trunk lighting, RGB ground effect lighting, BajRon anti-sway bar, to be continued ......
Member of the WSR (Woodstock Spyder Riders)
-
Originally Posted by ThreeWheels
It can be MADE to fit.
I'd say it was a skill level of 3 or greater.
On a scale of one to one-hundred; my skill level would almost a three...
-
-
left panel removed
tried for a hour to get the front left panel off to try to install a air horn but cant even get it off or even find the factory horn to connect to the wires to the new horn so the button will work is their a trick to getting it off ? help
Last edited by spyderpoop; 07-05-2013 at 01:26 PM.
-
What new service panels??
Originally Posted by fastfraser
I was in at my dealer and decided to get the new oil filter and tranny filter kit and asked if I needed them to do the oil change to get the new service panels and low and behold the skies opened and they said NO so I whipped out my BRP coupon and walked out with the panels . Thanks Two Wheel Motorsports . So I stripped the Spyder down pulled the drain plugs, lubed the A arms installed the new filters and cover, added the oil reinstalled the panels including the new panels and next oil change I will easily save at least 1 hour in panel removal / replacement .Great development from BRP. It always amazed me that to start the oil change the first thing I did was remove the mirror .
What are you talking about when you refer to new service panels please?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|