Yea, as stupid as this sounds, I'm actually "missed" the brake a couple of times. As I said my size 15 shoe wasn't made for such a small pedal. I feel better about it now
Its a 10mm. Mine was wonderful on my previous '11 but not on the '14 with floorboards. I've tried it twice and taken it off each time.
I would think this pedal would be dangerous with floorboards, especially the BRP breakaway boards. I'm wondering if it would hang up on the top of the breakaway board before it was able to engage the breakaway feature. On the aftermarket boards, there is a cutout which will let you depress the OEM pedal until it is flush with the board. The extended pedal would be stopped an inch or so sooner.
I would think this pedal would be dangerous with floorboards, especially the BRP breakaway boards. I'm wondering if it would hang up on the top of the breakaway board before it was able to engage the breakaway feature. On the aftermarket boards, there is a cutout which will let you depress the OEM pedal until it is flush with the board. The extended pedal would be stopped an inch or so sooner.
It works fine with the break away floorboards, no problem
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer