-
How to remove pasenger backrest on RT Limited?
Need some help with removing the passenger backrest on the RT Limited. Looks like it should come off by removing the Torx screws in the rear trunk. Sound right? Thanks
-
That's where I'd start looking... Get that inside panel in the top trunk out of the way... Anything holding the badkrest in place should then be visible. Good Luck!
You MIGHT be able to download passenger backrest removal and re-assembly instructions from Corbin's website...
-
Very Active Member
Originally Posted by SpyRyd
Need some help with removing the passenger backrest on the RT Limited. Looks like it should come off by removing the Torx screws in the rear trunk. Sound right? Thanks
Remove 3 Torx from inside the rear trunk, then 2 smaller torx up above holding the plastic 'top' in place just need to be loosened.. then the whole thing will just slide up and out....
Spyder #1 - 2008 GS SM5 Premier Edition #1977. RIP after 80,000 miles.
Spyder #2 - 2012 RT SM5. Traded in after 24,000 miles.
Spyder #3 - 2015 F3 SM6. Put 13,000 miles on and sold it.
Spyder #4 - 2017 F3 SM6. Too good of a deal to pass up!
-
Originally Posted by Firefly
Remove 3 Torx from inside the rear trunk, then 2 smaller torx up above holding the plastic 'top' in place just need to be loosened.. then the whole thing will just slide up and out....
Located the Torx screws inside the rear trunk. Looks simple enough...thanks.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|