-
Ultimate Spyderlover
Yep, the lighting looks like it's gonna work out. I may even have a teaser pic tonight if all goes well....
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Originally Posted by NVERLAST1
has anybody used there wheel lights recently? i wanted feedback on how they looked and how tough to install?
I installed them on my bike and I absolutley love the look. You can check them out on this website. //Www.midtownmcmania its at the very end of the video very cool didnt even know I was being filmed.
-
Ultimate Spyderlover
Originally Posted by Badasz
I installed them on my bike and I absolutley love the look. You can check them out on this website. //Www.midtownmcmania its at the very end of the video very cool didnt even know I was being filmed.
Thank you so much Badasz! I knew there was somebody on this forum other than Eraser that's done em!
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Ultimate Spyderlover
-
Power puc
-
Ultimate Spyderlover
Originally Posted by Badasz
W
Single wire is the way to go it takes time but its a much cleaner look. The best way to figure out a design is to photo copy a picture of the rim from the internet or shop manual make several copies grab different color magic markers and create your designs
If your close to CT I could do them for you pm me.
Actually, I'm at the final stages. Gonna do the power hook up tonight. Might even have a pic if all goes well....hopefully the lights will turn on.
However, I think the OP is still at the early stages. I wonder where he lives....he might could use your help.
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Active Member
LOL IM IN NC , I plan on finish drillin holes in front tonight maybe back too. I think they come tomorrow, did either of u cut the notch for back wheel?
-
Active Member
^^^^^^^^ what is single wire?
Originally Posted by Badasz
W
Single wire is the way to go it takes time but its a much cleaner look. The best way to figure out a design is to photo copy a picture of the rim from the internet or shop manual make several copies grab different color magic markers and create your designs
If your close to CT I could do them for you pm me.
-
Active Member
that spyder with lights is sweet, how many leds u have on each wheel?
-
Originally Posted by NVERLAST1
has anybody used there wheel lights recently? i wanted feedback on how they looked and how tough to install?
I love these lights.
I actually only ride at night because of these damn things.
Unfortunately I'm giving up the Spyder for now and getting back to a two wheeler.
It's been three fun years and it's time for a new toy.
I was just really lucky to be the first to get the LED's done by the Raw Design team.
Anyone reading this...these lights are the bomb and I've seen the Gloryders and they don't compare.
Gloryders are great for the money but for about ten times more the price, you get about 1,000,000 more the awesomeness!!!
Good luck to everyone who will be installing these LED's.
They are worth the headache and price tag.
P.S. If you are happy with the placements of the wires and LED's, super glue it down. TRUST ME ON THIS. This is coming from experience.
- China Teves
-
Ultimate Spyderlover
-
Active Member
I ONLY SEE 6 LEDS ON THE SPOKES RIGHT? am i missing something?
-
Ultimate Spyderlover
It's 9 on each spoke. I had to cut the middle lights to a 3 led design to make it all work better. I'm glad I did. It looks a whole lot cleaner and smoother. Just start at the edge and count down....if you do, you'll notice that you count 6 leds before hitting the middle, then in the middle you'll count 3 leds, then as you continue on you'll count 6 leds again.....giving you 2 6's and 1 3's down each spoke.
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Very Active Member
Hope you have a way to turn them off. Red wheel lights aren't always legal.
-
Active Member
OHHHHH ok i see know, so your leds are on spokies on none on the inside rims? what made u decide that?
-
Active Member
WHAT HAPPENED TO THE 15 6-led idea on each wheel?
-
Registered Users
-
Ultimate Spyderlover
Last edited by Kratos; 08-13-2012 at 01:24 PM.
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Active Member
wowwwwwwwww now thats bright!!!!!!!!!!!!!!!!
-
Ultimate Spyderlover
Originally Posted by Arr MiHardies
Hope you have a way to turn them off. Red wheel lights aren't always legal.
This design is called "fire power". It's not red during rotation, it has a deep golden-orange fire effect when riding. So I should be ok. Also, I do have them on a switch, so even while riding, just a flick of a button, and they're off in the blink of an eye.
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Active Member
great minds think alike im doing same thing lol
-
Ultimate Spyderlover
Originally Posted by NVERLAST1
great minds think alike im doing same thing lol
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Active Member
WHEN U SOLDER WIRES FOR leds what size wire did you use?
-
Ultimate Spyderlover
Originally Posted by NVERLAST1
WHEN U SOLDER WIRES FOR leds what size wire did you use?
Used the wire attached to the lights, and used a small heat shrink to go over the solder point. Got a very small rison core solder and small solder gun from a hardware store. It makes it MUCH EASIER since wire is so tiny.
2012 Spyder RS S SE5 Magnesium, Power Commander V with Autotune, HMF Exhaust, Green air filter,
TricLed/Custom Dynamics Led Project titled "Knight Rider"
-
Active Member
did u clean rims with something besides rubbing alcohol? do I need adhesion promoter or something else to make less stick to chrome wheels
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|