Results 1 to 25 of 29

Hybrid View

  1. #1
    Active Member Ltownblue's Avatar
    Join Date
    Apr 2010
    Location
    Hickory, NC
    Posts
    153
    Spyder Garage
    0

    Default Coolant Reservoir

    Mine cracked... down the middle during a ride on July 3rd. Crack was in the same location that others have reported - vertical on the front side of the tank. I currently have 23k miles on my '08 SM5, and other than brake squeal and a small caliper leak, this is the only problem that I've had. Fortunately, the leak was small enough for me to make it home. Be warned though, there does seem to be a systemic problem with these reservoirs. I picked up another one at Bert's Mega Mall - price with shipping and a couple of hose clamps was around $80.
    Rather carve than cruise.

  2. #2
    Very Active Member WackyDan's Avatar
    Join Date
    Apr 2009
    Location
    Charlotte, NC
    Posts
    1,956
    Spyder Garage
    0

    Default

    Quote Originally Posted by Ltownblue View Post
    Mine cracked... down the middle during a ride on July 3rd. Crack was in the same location that others have reported - vertical on the front side of the tank. I currently have 23k miles on my '08 SM5, and other than brake squeal and a small caliper leak, this is the only problem that I've had. Fortunately, the leak was small enough for me to make it home. Be warned though, there does seem to be a systemic problem with these reservoirs. I picked up another one at Bert's Mega Mall - price with shipping and a couple of hose clamps was around $80.
    Seems they like to pop in the heat eh? I'm ordering a spare tonight along with that connector that seems to go bad too.
    WackyDan - Fun, not crazy.
    Charlotte (Matthews), NC
    Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
    *Mower deck in development*
    2008 model -new in crate, April 09
    26,000 miles.

    Looking for other Charlotte area riders to cruise with and compare Spyders.

    HAPPY SPYDER OWNER

  3. #3
    Registered Users pro10is's Avatar
    Join Date
    May 2011
    Location
    USA
    Posts
    857
    Spyder Garage
    0

    Default

    Quote Originally Posted by Mr Orange View Post
    Sounds like a good reason to pack some JB Weld into the tool kit.
    Great idea but make it JB Weld Quick (the four minute stuff).

  4. #4
    Active Member
    Join Date
    Dec 2008
    Location
    Connecticut
    Posts
    39
    Spyder Garage
    0

    Default

    Quote Originally Posted by Ltownblue View Post
    Mine cracked... down the middle during a ride on July 3rd. Crack was in the same location that others have reported - vertical on the front side of the tank. I currently have 23k miles on my '08 SM5, and other than brake squeal and a small caliper leak, this is the only problem that I've had. Fortunately, the leak was small enough for me to make it home. Be warned though, there does seem to be a systemic problem with these reservoirs. I picked up another one at Bert's Mega Mall - price with shipping and a couple of hose clamps was around $80.
    I have 2008 Roadster w/ 21,000 mile. i started to have collant slowly leak from this tank about a year ago (very littl and not enough to put the bike out of svc) then last week it started to come out after a short ride but made it back home. after checking closley with the panels off it was leaking on the back side in the middle of the tank at the seam. The seam looks like it was rotting or corroding away. I called my dealer (Land & Sea, Waterbury, CT), these are great guys there, he said he had one in stock and would warranty it (my $50.00 BRB deductable would be needed). They did not even need the bike in to there shop. A new one was quoted for $65.00 so this saved me a little $$$. After swapping it out and replacing the clamp (old one had to be dremel'd off, easy task) the install was simple.
    This leads me to another issue on the collant **** VERY IMPORTANT ****. i drained the collant from the radiator using the drain plug at the bottom of the radiator, sounds normal right. The Drain Plug and Flange that the plug screws into completely separated from the radiator with very little pressure used on the wrench. I had the have this flange welded back on at a local radiator that welds aluminum (cost $70.00), new radiator is $300.00ish. This design is very bad at best. All spyder riders, word of warning, do not touch the drian plug on the radiator !!! if you need to drain the collant pull the lower hose, OEM clamp will have to be dremel'd off and replaced (again very simple task) but relly no risk at doing this for damage. I posted this info on another string (Radiator Broke).

  5. #5
    Very Active Member MikeinGA's Avatar
    Join Date
    Jul 2011
    Location
    Mount Airy,Ga.
    Posts
    1,306
    Spyder Garage
    0

    Default

    Quote Originally Posted by Ltownblue View Post
    Mine cracked... down the middle during a ride on July 3rd. Crack was in the same location that others have reported - vertical on the front side of the tank. I currently have 23k miles on my '08 SM5, and other than brake squeal and a small caliper leak, this is the only problem that I've had. Fortunately, the leak was small enough for me to make it home. Be warned though, there does seem to be a systemic problem with these reservoirs. I picked up another one at Bert's Mega Mall - price with shipping and a couple of hose clamps was around $80.
    BRP knows about this, I hope you got the new type of coolent tank. Didn't you get the memo from BRP? I carry a coolent tank repair kit with me. I started to trailer my Spyder if I go more than 150 miles from home due to some dealers were reported that they won't work on a Spyder unless it was bought at there dealer ship and most of the dealers do not stock parts for Spyders. I have been testing the BRP parts system, when we go traveling I stop at a Spyder dealer and ask for the things that are likely to break on a trip and they don't have them. This is the big down fall with owning a BRP Spyder. Like the old saying: A Motor Vehicle Is Only AS Good AS It's Availability To Get Parts And Service. That's IMHO.

    Mike
    Last edited by MikeinGA; 08-23-2012 at 04:45 PM.

  6. #6
    Active Member
    Join Date
    Dec 2008
    Location
    Connecticut
    Posts
    39
    Spyder Garage
    0

    Default

    Quote Originally Posted by MikeinGA View Post
    BRP knows about this, I hope you got the new type of coolent tank. Didn't you get the memo from BRP? I carry a coolent repair kit with me. I started to trailer my Spyder if I go more than 105 miles from home due to some dealers were reported that they won't work on a Spyder unless it was bought at there dealer ship and most of the dealers do not stock parts for Spyders. I have been testing the BRP parts system, when we go traveling I stop at a Spyder dealer and ask for the things that are likely to break on a trip and they don't have them. This is the big down fall with owning a BRP Spyder. Like the old saying: A Motor Vehicle Is Only AS Good AS It's Availability To Get Parts And Service. That's IMHO.

    Mike
    Not sure what the new type of coolant tank is you referred too, my dealer in Waterbury, Ct had one in stock and it looked to be identical to the bad one that came out. I have not recieved anything from BRP talking about a known problem. Please advise if you have more details on a different type tank. Thanks

  7. #7
    SpyderLovers Founder Lamonster's Avatar
    Join Date
    Aug 2007
    Location
    Springfield, MO
    Posts
    15,858
    Spyder Garage
    0

    Default

    The tank has been redesigned internally.


  8. #8
    Registered Users
    Join Date
    Aug 2012
    Location
    Melbourne Australia
    Posts
    14
    Spyder Garage
    0

    Wink another failure

    same thing happened to me last week on an 09 RS SM. It is winter here in Oz so heat stress is not expected. Best guess isthat it started with a poor or loose connection to thermostat housing which let pressure and heat build up. My tank split just as described. The dealer said it was split by expanding andpressing against the frame. He put a rubber pad in place to protect it.

    I have also wired in a fan override switch to give some ability to lower the temperature in traffic. Easy job.

  9. #9
    Invalid Emails
    Join Date
    Jun 2010
    Location
    Jackson, Michigan
    Posts
    1,245
    Spyder Garage
    0

    Default

    I'd like to see a list of the most common items that break down on the Spyders by model...RS/RT...items that can be carried on the road so you don't have to rely on dealers as to whether or not they'll work on your Spyder...I carry fuses, relays, sparkplugs, oil and a fire extinguisher..I know this isn't a complete list...Anybody care to contribute to the list?

  10. #10
    Very Active Member Freddy's Avatar
    Join Date
    Dec 2009
    Location
    West Oz
    Posts
    906
    Spyder Garage
    1

    Default

    Does the new design have a new part number?


    Quote Originally Posted by Lamonster View Post
    The tank has been redesigned internally.

    The best substitute for brains & knowledge is....................silence.

  11. #11
    SpyderLovers Founder Lamonster's Avatar
    Join Date
    Aug 2007
    Location
    Springfield, MO
    Posts
    15,858
    Spyder Garage
    0

    Default

    Quote Originally Posted by Freddy View Post
    Does the new design have a new part number?
    Not sure but there are no old tanks being shipped since early 2012.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •