Every year, for the past 4 years, about this time there is thread after thread about heat issues. First. it was on the GS, then the RS and now for the past 2 years, on the RT. Heck Spyderpops has made a living dealing with this problem. What I don't understand, is why doesn't BRP solve this problem? Why do they continue to put out a product that they know has this issue
Love my
Statistics show that most motorcycle accidents are caused by a defective nut holding the handlbars.
Doc...
But there may also be more truth in that statement than anybody will care to admit!
Product developement time can take quite a while... Perhaps the "next" RT and RS will have it sorted out.
Heck its all the products.. I sell the Can am ATVs which I believe are the best.. But they have always had a heating issue,, Some one the other day said its because of all the torque the engine creates,, Yes I want the heat issues resolved,, No I don't want to loose torque lol
As much as I'd like to see the heat go away, it has to go somewhere.
I was out for a walk yesterday and as I was walking past a parked car that had the engine running, I could feel the heat radiating out from it. Since the passengers were in the car, I'm sure they had the AC running and didn't notice the heat.
The spyder is not so fortunate. It isn't enclosed and it doesn't have AC. I just installed SpyderPops cat-shield and lower block-off plate on my RT. I haven't had a chance to see how effective it is, but I'm hoping that I can at least get the heat to go somewhere else.
Heck its all the products.. I sell the Can am ATVs which I believe are the best.. But they have always had a heating issue,, Some one the other day said its because of all the torque the engine creates,, Yes I want the heat issues resolved,, No I don't want to loose torque lol
The 800s and 1000s do need some tweaking. I've got a buddy in Utah who rides an Outtie 8 MAX and he's mounting another fan under the front rack with some ducting to increase airflow to the radiator. He's also filled it up with engine ice too!
And the bike STILL will get warm on low-speed passes in the mountains!
Get real guys your sitting on an internal combustion engine, Its gotta generate heat, I can remember two bikes off hand that i had that generated more heat than my Spyder. [Sv650 and a Hayabusa]
Sure Brp could change the engine layout, get rid of the panel's and turn it into a naked trike but after looking at that monstrously would you have bought one.
Get real guys your sitting on an internal combustion engine, Its gotta generate heat, I can remember two bikes off hand that i had that generated more heat than my Spyder. [Sv650 and a Hayabusa]
Sure Brp could change the engine layout, get rid of the panel's and turn it into a naked trike but after looking at that monstrously would you have bought one.
And think about it, In the winter heat is good.
I don't get how everyone is so dumbfounded by the heat. Not to be rude, but those who complain must not have ever ridden a 2-wheeler. All engines get hot, the heat has to go somewhere, and you're essentially riding on top of a semi-exposed engine. I've chimed in on another post about this somewhere and my response was, and still is, if you where the proper riding gear the heat is diminished a great deal. On long rides, I wear a pair of Dainese Lady Star boots - they are full leather, calf-high, and have Gore-Tex which keeps my feet very comfy. I can ride with my foot in front of the fan and only barely feel the heat that sometimes radiates up my pant leg (when I'm not wearing riding pants).
I honestly don't believe there's an issue with the heat, but rather an issue with the lack of proper riding gear.
There are times when I can feel the heat through my boot. Generally when the ambient temp reaches 105 plus. Then, what I've noticed most is heat coming from the lower port. I've made a couple of moc ups that will help move the air a couple inches out from the right peg. Once I'm satisfied with a design I'll have it reproduced in smoke or black plastic. Lots of ways to secure it, so don't see that as a problem.
Identify what you have control over and find peace with what you don't.
My calves get hot when I wear my speedo and ride, I suppose I could wear boots with my speedo...
i just threw up in mouth...
Rewaco RF-1 GT
Inline 4 cylinder Ford Zetec with multi-port fuel inject, 140 HP 0-60mph: 5.8 seconds 5 speed sync manual with reverse, mechanical dry clutch. Front suspension: Trapezoidal fork with center spring Rear suspension: Independent with Bilstein gas shock absorbers Brake System: Grimeca calipers, linked ventilated discs, with booster 10.57 gallons
The key issue is that we have ETOH in our gas, catalytic converters, and engines running so lean, that water cooling hardly suffices. Look at the new Hardleys - especially the TriGlide - first order of business is to remove the cats, change the intake and exhaust, and remap the injection system - just to cool it down.
This really isn't about internal combustion, as much as reaching the limits of technology to deal with regulations.
2014 RT SE6 Rider
X - Honda Rider
X - RT S driver
X - RS driver
Lifetime VFW Member
SPEEDOS That's a mental picture I could have done without!!!
2014 RT Limited SE-6 in Black Currant. Mods so far: Rivco Trunk Mounted Double Flag Holder Kit, Diamond R Drivers Tour Mug, Tric Led Drink Holder, BRP Hitch, Mini Trailer USA Nomad Trailer. RonBar and links, Spyclops I & II, Lighted Bump Skid, LED head and fog lights. Foam hand grips. A arm lights, both upper and lower
I don't get how everyone is so dumbfounded by the heat. Not to be rude, but those who complain must not have ever ridden a 2-wheeler. All engines get hot, the heat has to go somewhere, and you're essentially riding on top of a semi-exposed engine. I've chimed in on another post about this somewhere and my response was, and still is, if you where the proper riding gear the heat is diminished a great deal. On long rides, I wear a pair of Dainese Lady Star boots - they are full leather, calf-high, and have Gore-Tex which keeps my feet very comfy. I can ride with my foot in front of the fan and only barely feel the heat that sometimes radiates up my pant leg (when I'm not wearing riding pants).
I honestly don't believe there's an issue with the heat, but rather an issue with the lack of proper riding gear.
So let me get this straight. What your saying is, riding the Spyder nude is not recommended?
Here's To A Great Riding Season, Snowmobile That Is
"Better to remain silent and be thought a fool than to speak and remove all doubt"
"Give a man a fish and he will eat for a day.
Teach a man to fish and he will eat for a lifetime.
Give a man religion and he will die praying for a fish"
If you have a GS/RS taking off the Left and right underneath panel behind the engine helps a Lot!
Don, t know if they are the same on the RT.
In CT if its over 85 degrees I,m riding any vehicle besides the Spyder Below
Every year, for the past 4 years, about this time there is thread after thread about heat issues. First. it was on the GS, then the RS and now for the past 2 years, on the RT. Heck Spyderpops has made a living dealing with this problem. What I don't understand, is why doesn't BRP solve this problem? Why do they continue to put out a product that they know has this issue
What heat!!!!! Over here in AZ. we don't notice whats coming off the engine.
Hindle exhaust, Kewlmetal K&N intake + prefilter, Kuryakyn widow pegs, Kuryakyn grips, Madstad 20in. windshield, Juice Box, 02Modifier, Kewlmetal backrest and carrier, missing air dam, missing belt shield, 1" riser, Kewlmetal handlebar risers,Evoluzione sway bar, Street Magic/Day Runner Pucks, Glo Riders Amsoil, 10w40, Rons performance wires
I don't get how everyone is so dumbfounded by the heat. Not to be rude, but those who complain must not have ever ridden a 2-wheeler. All engines get hot, the heat has to go somewhere, and you're essentially riding on top of a semi-exposed engine. I've chimed in on another post about this somewhere and my response was, and still is, if you where the proper riding gear the heat is diminished a great deal. On long rides, I wear a pair of Dainese Lady Star boots - they are full leather, calf-high, and have Gore-Tex which keeps my feet very comfy. I can ride with my foot in front of the fan and only barely feel the heat that sometimes radiates up my pant leg (when I'm not wearing riding pants).
I honestly don't believe there's an issue with the heat, but rather an issue with the lack of proper riding gear.
This seems to be an issue that will never go away. In California in the part of I-8 that is around El Centro, the summer heat can get as high as 118, maybe more on any given summer day. That's a bit warm and a bit hard to ride in, but there are ways to get by. I don't have any "special" gear to ride with...just jeans, Corcoran 1944 boots, under shirt with a coarse white or very light-colored cotton shirt. I do not have, have never had and will never install riding pegs. The vent on the right side of the Spyder is designed to blow the heat away from the rider's legs. If you put you leg, foot, or whatever in front of the vent it WILL get hot. In almost 50 years of riding I have accepted the fact that engines that use gasoline to operate will get hot. They are designed that way and either we accept that or ride bicycles, horses, roller skates, cars, etc.
Last edited by Dudley; 06-15-2012 at 04:34 PM.
2008 GS SE5 in 2008
Traded at 43,000 miles for a left over
2010 RT SM5 in 2011
Traded at 57,000 for a left over
2014 RTS SE6 in 2015, which has 35,000 miles
Oct 19th, 2017, totaled 2014 RT while killing a Javaline
Dec 12th, 2017 drove a 2017 F3L home. What an awesome machine!
lots of folks here have no previous m c experience, so the spyder's heat output seems extreme. those of us that came from the two wheel m c world know what real heat feels like. imagine sitting on a heavyweight, air cooled bike, stuck in traffic, on a 90 plus degree day. THAT is hot. you have to realize our engines are inside a plastic shell, and as it's been said previously, the heat has to go somewhere. be happy it's your foot and not your face. take those splashpans off, it makes a big difference.