-
SpyderLovers Sponsor
INSTRUCTIONS
We have added instructions to our website for the RT BumpSkidTM and RT Stainless Steel Grilles.
Go to http://spyderpops.com/3.html to see how these install.
-
Active Member
SpyderFest Installs?
I see you're going to SpyderFest... Great! So am I.
Will you be doing bumpskid installs there? What will be the upcharge? Thanks!
Regards-
Frank.
2014 Cognac RT-S SE6 1330
2011 Viper Red RT-S SE5 998 (sold)
-
Registered Users
Thanks for posting the pics. I ordered mine and can't wait to put it on. Love the look. Thanks again.
Jersey Girl
Jersey Shore
2016 F3 Limited
2012 Jeep Sahara - my other ride
-
SpyderLovers Sponsor
Originally Posted by FrankPa
I see you're going to SpyderFest... Great! So am I.
Will you be doing bumpskid installs there? What will be the upcharge? Thanks!
YES, we will be doing installs at Spyderfest however we have not determined what we will charge for install. It all depends on our vendor spot and how many we can do in a day.
That's a real long ride without protection and 4 months away.
-
SpyderLovers Sponsor
Originally Posted by Jersey Girl
Thanks for posting the pics. I ordered mine and can't wait to put it on. Love the look. Thanks again.
I just checked and it will be there today!
-
Active Member
-
Active Member
Last edited by FrankPa; 01-11-2012 at 07:44 PM.
Regards-
Frank.
2014 Cognac RT-S SE6 1330
2011 Viper Red RT-S SE5 998 (sold)
-
Received mine today. That was fast!!
For someone with four thumbs... it looks easy to install. I'll have to double-check on how to jack up the Spyder on my lift-jack. Hopefully that part will be easy!
I'll also have to check into the polish you recommended... I think Back to Black? Anyway, we'll look at that.
SL #7026
VBA #652
HOG #3935417
2011 Viper-Red Spyder RT SE5 & Trailer
2017 HD Ultra Limited
Former Rides: 2014 HD Ultra Limited; '04 Kawa Nomad; '09 HD Ultra-Classic; and many Hondas through the years.
Spyder Newbies Do's & Do Not's: http://www.spyderlovers.com/forums/s...-Spyder-owners
-
Registered Users
Originally Posted by Bob Denman
Well I just trotted this past the "Financial Oversight Committee" and she finds it intriguing... It looks as if it could keep the front end safe!
So now it's a waiting game on the cash...
I got one and installed it, sorry to say Bob but it won't protect the front when you t-bone some poor lass.
Corbin saddle
spyderpops block off plate, bump skid, belt guard
IPS
Tricled LED lights all around(too many to name here)
Smoothspyder belt tensioner
Custom Dynamics britesides
VTC floorboards, upper air vents, spoiler
BK car stuff HID upgrade
trailer hitch
Repainted rear fender, trunk latch assembly, switch cluster, gauge cluster
cell phone interface kit
travel cover that no longer fits due to the spoiler
New sway bar
New shock relocator
-
Active Member
Showed up this morning
Wow.... That was quick! Looks like I will be busy tonight.
-
SpyderLovers Sponsor
Originally Posted by guinness
Wow.... That was quick! Looks like I will be busy tonight.
Just the way we do business!
-
MOgang Member & Monster Member
Originally Posted by guinness
Wow.... That was quick! Looks like I will be busy tonight.
Originally Posted by SPYDERPOPS
Just the way we do business!
Yes it is!
Got mine yesterday Harvey! I'll be installing and posting pics as soon as I get my RT back home!
It is at Cowtown getting a little tender loving care.
Thanks again Harvey,
And folks this is another very good looking product from SpyderPops and very heavily built.
-
Ordered, received and I got it installed myself with no help. Excellent instructions. Well made. Now if only someone made a snow plow attachment.
-
Registered Users
Originally Posted by Doug B
Ordered, received and I got it installed myself with no help. Excellent instructions. Well made. Now if only someone made a snow plow attachment.
I bet spyderpops is thinking about making this happen.
Corbin saddle
spyderpops block off plate, bump skid, belt guard
IPS
Tricled LED lights all around(too many to name here)
Smoothspyder belt tensioner
Custom Dynamics britesides
VTC floorboards, upper air vents, spoiler
BK car stuff HID upgrade
trailer hitch
Repainted rear fender, trunk latch assembly, switch cluster, gauge cluster
cell phone interface kit
travel cover that no longer fits due to the spoiler
New sway bar
New shock relocator
-
Got Mine !
Thanks to Spyderpops for their excellent products and service. I received my skidplate, catalytic heat shield and awaiting my right side heat deflector. We are 22 degrees in Maryland and with two replaced knees and no garage I will have someone else install these. I found an excellent shop that services, stores and tows all types of motorcycles, trikes and atv's. Their shop rates are reasonable and he is going to install all the goodies I have bought at the end of the season. Easi lights on fenders, gps mount, elka shocks and now the products from Spyderpops. I going to feel really good pulling out in my newly tricked out RT.
-
SpyderLovers Sponsor
Originally Posted by JCSMOKE
I bet spyderpops is thinking about making this happen.
How did you know?
-
-
Registered Users
-
Active Member
bumpskid on its way
The 2012 RT LTD (white) is on order, after 2 years pouring over this forum ! ETA in Australia in March/April
At the same time, the possum pusher is also on its way, plus the carbon fibre red/black dash.
Can't wait to get my hands dirty!
Looks like the bumpskid is the way to go to protect the underbelly
Jos
-
Originally Posted by trxrspyder
When??????? LOL
Second Tuesday of next week! No really, Spyderpops told me prolly bout three weeks. I (we) need one of each. His 'n hers.
-
Bumpskids
I love it it's on my bucket list
QUOTE=SteveMac;404668]Harvey,
Will you be bringing some of these to Spyderfest? I am a tightwad and I can save the shipping costs! [/QUOTE]
-
SpyderLovers Sponsor
ALL OF THE ANSWERS ARE HERE AT THE NEW FAQ SECTION.
http://spyderpops.com/2.html
-
SpyderLovers Sponsor
Originally Posted by SteveMac
Yes it is!
Got mine yesterday Harvey! I'll be installing and posting pics as soon as I get my RT back home!
It is at Cowtown getting a little tender loving care.
Thanks again Harvey,
And folks this is another very good looking product from SpyderPops and very heavily built.
Is it home yet, can't wait to see the pictures, the BumpSkid is going to look right at home on this one!
-
MOgang Member & Monster Member
-
Active Member
Does the Bumpskid increase bikes temp.
I want to order one of these Bumpskids but have heard that it may increase the bikes temperature ...anyone have more info on this for me or experienced an increased temperature on the bike once they have installed the Spyderpops bumpskid?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|